1-Quality monitoring for all phases of the project cycle from beginning to approval of Final MCC to ensure compliance with applicable MSAERs and project specifications.2-Review of contractor Quality system as Contractor's Quality Plan, ITPs and method statement.3-Inspection of Batch Plants and Third- party Civil Testing laboratories to monitoring the day-to-day activities of batch plants and third-party testing laboratories in their area.4-Witnessing the concrete trial mix for new concrete mix design, including review of test results.5-Attending weekly Quality meeting and Review of Contractor's 2-Week Look-ahead Schedule to assist in the planning of inspection coverage of the work activities.6-Monitor and inspect of on-going construction activities even if an RFI was not received, to ensure that rework and potential non-compliances are avoided.7-Monitoring for contractors' material storage yards to ensure that the Contractors compliance with procedure for the handling, storage and preservation of materials.8-Attend contractor RFI for hold point, witness point and daily surveillance of site for various ongoing activities.9-Walkthrough of punch list items to upload in the MPCS and further verification with SAPMT and contractor for closure in MPCS.10-Issue proactive, General comments, standard violation, preparing focused assessment and follow up for closure in Log book entry/EPM after contractor reply.11-Ensure full compliance with company safety regulations and HSE management system.

1.Ensure that the Project were executed and performed all in accordance to Plans and Specifications (ASTM)2. Making Quality verification Documents and checking that on site as QA/QC Inspector with client.3.Quality control of work Execution.4. Prepare request for inspections5. Making Inspection Request for each activity according to ITP.6.Making Request for inspection (RFI) to Client.7. Keeping, filing of documents such as material data specifications, test logs and other items related tothe project and make records available any time as requested.8.To inspect and check all incoming materials intended for project use if it conforms to specifications.9.To review IFC drawings prior to implementation.10. To Inspect & Check the Quality Test of Sub Base, Aggregate base course.11.I monitor all the road testing & Concrete Works.12. Timely execution of civil engineering activities in terms of quality and quantity.13. Maintain schedule and meet deadlines. Takeoff quantities of civil works.14. Timely and regular reporting of progress and quality towards Managers.15. Execution in full compliance with all applicable drawings, specifications, field quality & controlplans.16. Report & prepare letters for non-conformities.17. Supervise the preparation of as built drawings.18. Inspection according to specification and scope of work.19.Complete execution of Construction Activities20.Verification according to IFC Drawing for reinforcement detail of column footings, beams, roofslab, plastering and preparation of quantity measurement, submission and completion.

1.Ensure that the Project were executed and performed all in accordance to Plans and Specifications (ASTM)2. Making Quality verification Documents and checking that on site as QA/QC Inspector with client.3.Quality control of work Execution.4. Prepare request for inspections5. Making Inspection Request for each activity according to ITP.6.Making Request for inspection (RFI) to Client.7. Keeping, filing of documents such as material data specifications, test logs and other items related tothe project and make records available any time as requested.8.To inspect and check all incoming materials intended for project use if it conforms to specifications.9.To review IFC drawings prior to implementation.10. To Inspect & Check the Quality Test of Sub Base, Aggregate base course.11.I monitor all the road testing & Concrete Works.12. Timely execution of civil engineering activities in terms of quality and quantity.13. Maintain schedule and meet deadlines. Takeoff quantities of civil works.14. Timely and regular reporting of progress and quality towards Managers.15. Execution in full compliance with all applicable drawings, specifications, field quality & controlplans.16. Report & prepare letters for non-conformities.17. Supervise the preparation of as built drawings.18. Inspection according to specification and scope of work.19.Complete execution of Construction Activities20.Verification according to IFC Drawing for reinforcement detail of column footings, beams, roofslab, plastering and preparation of quantity measurement, submission and completion.

1.Ensure that the Project were executed and performed all in accordance to Plans and Specifications (ARAMCO/ AIR PRODUCTS)2. Making Quality verification Documents and checking that on site as QA/QC Inspector with client.3.Quality control of work Execution.4. Prepare request for inspections5. Making Inspection Request for each activity according to ITP.6.Making Request for inspection (RFI) to Client.7. Keeping, filing of documents such as material data specifications, test logs and other items related tothe project and make records available any time as requested.8.To inspect and check all incoming materials intended for project use if it conforms to specifications.9.To review IFC drawings prior to implementation.10. To Inspect & Check the Quality Test of Sub Base, Aggregate base course.11.I monitor all the road testing & Concrete Works.12. Timely execution of civil engineering activities in terms of quality and quantity.13. Maintain schedule and meet deadlines. Takeoff quantities of civil works.14. Timely and regular reporting of progress and quality towards Managers.15. Execution in full compliance with all applicable drawings, specifications, field quality & controlplans.16. Report & prepare letters for non-conformities.17. Supervise the preparation of as built drawings.18. Inspection according to specification and scope of work.19.Complete execution of Construction Activities20.Verification according to IFC Drawing for reinforcement detail of column footings, beams, roofslab, plastering and preparation of quantity measurement, submission and completion.

1.Ensure that the Project were executed and performed all in accordance to Plans and Specifications (ASTM)2. Making Quality verification Documents and checking that on site as QA/QC Inspector with client.3.Quality control of work Execution.4. Prepare request for inspections5. Making Inspection Request for each activity according to ITP.6.Making Request for inspection (RFI) to Client.7. Keeping, filing of documents such as material data specifications, test logs and other items related tothe project and make records available any time as requested.8.To inspect and check all incoming materials intended for project use if it conforms to specifications.9.To review IFC drawings prior to implementation.10. To Inspect & Check the Quality Test of Sub Base, Aggregate base course.11.I monitor all the road testing & Concrete Works.12. Timely execution of civil engineering activities in terms of quality and quantity.13. Maintain schedule and meet deadlines. Takeoff quantities of civil works.14. Timely and regular reporting of progress and quality towards Managers.15. Execution in full compliance with all applicable drawings, specifications, field quality & controlplans.16. Report & prepare letters for non-conformities.17. Supervise the preparation of as built drawings.18. Inspection according to specification and scope of work.19.Complete execution of Construction Activities20.Verification according to IFC Drawing for reinforcement detail of column footings, beams, roofslab, plastering and preparation of quantity measurement, submission and completion.

1.Ensure that the Project were executed and performed all in accordance to Plans and Specifications (ARAMCO/ AIR PRODUCTS)2. Making Quality verification Documents and checking that on site as QA/QC Inspector with client.3.Quality control of work Execution.4. Prepare request for inspections5. Making Inspection Request for each activity according to ITP.6.Making Request for inspection (RFI) to Client.7. Keeping, filing of documents such as material data specifications, test logs and other items related tothe project and make records available any time as requested.8.To inspect and check all incoming materials intended for project use if it conforms to specifications.9.To review IFC drawings prior to implementation.10. To Inspect & Check the Quality Test of Sub Base, Aggregate base course.11.I monitor all the road testing & Concrete Works.12. Timely execution of civil engineering activities in terms of quality and quantity.13. Maintain schedule and meet deadlines. Takeoff quantities of civil works.14. Timely and regular reporting of progress and quality towards Managers.15. Execution in full compliance with all applicable drawings, specifications, field quality & controlplans.16. Report & prepare letters for non-conformities.17. Supervise the preparation of as built drawings.18. Inspection according to specification and scope of work.19.Complete execution of Construction Activities20.Verification according to IFC Drawing for reinforcement detail of column footings, beams, roofslab, plastering and preparation of quantity measurement, submission and completion.

1.Ensure that the Project were executed and performed all in accordance to Plans and Specifications (ASTM)2. Making Quality verification Documents and checking that on site as QA/QC Inspector with client.3.Quality control of work Execution.4. Prepare request for inspections5. Making Inspection Request for each activity according to ITP.6.Making Request for inspection (RFI) to Client.7. Keeping, filing of documents such as material data specifications, test logs and other items related tothe project and make records available any time as requested.8.To inspect and check all incoming materials intended for project use if it conforms to specifications.9.To review IFC drawings prior to implementation.10. To Inspect & Check the Quality Test of Sub Base, Aggregate base course.11.I monitor all the road testing & Concrete Works.12. Timely execution of civil engineering activities in terms of quality and quantity.13. Maintain schedule and meet deadlines. Takeoff quantities of civil works.14. Timely and regular reporting of progress and quality towards Managers.15. Execution in full compliance with all applicable drawings, specifications, field quality & controlplans.16. Report & prepare letters for non-conformities.17. Supervise the preparation of as built drawings.18. Inspection according to specification and scope of work.19.Complete execution of Construction Activities20.Verification according to IFC Drawing for reinforcement detail of column footings, beams, roofslab, plastering and preparation of quantity measurement, submission and completion.