Responsibility• Monitor field construction (Electrical, Instrument & Telecom) activities to ensure installation requirements are met in compliance with specification• Reviews, surveillance, witness all activities in accordance with Inspection and Test Plant (ITP) / company requirements.• Ensuring a correct implementation of the approved Inspection Test Plan and others document.• Ensure all ITR quality assurance/control documentation is compiled and completed in a timely matter and meeting deadlines.• Conduct inspection equipment of Hazardous Area ((Electrical, Instrument & Telecom) to ensure equipment is suitable for the area in which it is installed as project specification & IEC Standard• Review document for ATEX Certificates and ATEX Register ((Electrical, Instrument & Telecom).• Review and signed off Completion Check sheet and Test sheet after inspection or testing.• Provides early feedback to the Team Leader on any issues, potential delays or interface problems.• Performing walk down inspection and completing punch lists.• To manage electrical, instrument & telecom activities for their discipline from Ready for Commissioning (RFC) status to Completion of the commissioning activities

Responsibility• Develop Quality management plan.• Reviews, surveillance, witness all activities in accordance with Inspection and Test Plant (ITP) / company requirements.• Provides early feedback to the Team Leader on any issues, potential delays or interface problems.• Performing walk down inspection and completing punch lists.• Inspect / review product material, testing to ensure compliance with Code, Standards and Specifications.• Ensure all ITR quality assurance/control documentation is compiled and completed in a timely matter and meeting deadlines.• Contribute to planning and organizing an EX inspection, data gathering and data recording system to meet current regulations• Prepare of Permit to Work (PTW), Lock-Out and Tag-Out (LOTO) and other safety procedures.• As Originator of Job Safety Analysis.• Provide and assist Pre-Job Safety Meeting.• Provide direct report to Client Electrical Inspector and Supervisor.• Compliance in according with HSE standard.

Responsibility • Supervises and monitoring the activities of assigned performer. Perform supervisory duties at the level established on behalf management.• Execute the specific inspections of Electrical & Instrumentation material, equipment including construction and installation activities on site following specified procedure of hazardous Area requirements and project specifications.• Carries out other similar duties such as providing advice on construction personnel or project engineer and report on work progress.• Ensure that all construction work is done in line with quality, HSE standard and other safety procedures.• Attend Pre-Start Up Safety Review meeting and Provide IRN.• Report on work progress to QC Manager for the result of inspection.• Compliance in according with Quality Management System ISO 9001:2015 to approach correctly all quality matters and to manage improvement actions.• Compliance in according with HSE standard and other safety procedures.

To guide & support construction, mechanical completion, pre-commissioning & commissioning activities undertaken by the construction & commissioning contractors cumulating in hand-over & final acceptance by production operation & maintenance group.Job description:• Interface and lease with Project Engineering Group• Liaise with Project Management Services Contractor• Liaise with Commissioning Contractor, Suppliers & Consultants as required• Assisting the construction and commissioning contractors with the preparation of their plans and procedures assuring they are both achievable and technically acceptable in-line with the project and legislative requirements• Actively monitor quality related activities such as pre-installation checks, installation compliance, pre-commissioning checks and associated risks with each of these areas and ensure problem areas are identified, reported and closed out.• Timely completion of assigned projects and tasks.• Bring forward suggestions for improvements within the areas of responsibility.• Undertake any other work and responsibilities as per separate instruction.• Monitoring and reporting status for construction, pre-commissioning, preservation and commissioning activities.• Ensure that the necessary HSE review process is completed and that all identified actions are completed in a timely manner.• Ensure that the requisite Permits, licenses have been obtained, and any relevant compliance requirements have been adhered too.

Job description : • Executes the specific inspections on materials, equipment and construction/installation activities on site. • Contribute to planning and organizing an Ex (Hazardous) inspection, data gathering and data recording system to meet current regulations.• Issues the relevant Quality Records and, when necessary, writes and sends to QC Supervisor non-conformances reports. • Checks cable laying and cable identification. • Performs all relevant loop checks. • Updates as built drawings. • Performs punch-listing operations. • Checks power transformers, switchboard, accumulator battery, sockets outlet, lighting system. • Performs visual inspections, dimensional test, checks rating and material for connection.• Performs tests of continuity, insulation resistance. • Checks installation of instruments. • Performs tests functional instruments. • Verify special processes and the relevant workers’ qualifications. • Witness the tests, controls and inspections carried out. • Ensure the correct implementation of the approved Inspection Test Plan.

Job description:• Comply with applicable safety instructions and other Company procedures.• Make sure that assessments of safety, economic impact and technical importance are• performed whenever required. Due diligence shall be observed, and initiative taken to secure the best result.• Treat all information, both written and spoken, obtained in the course of the work with confidentiality.• Carry out work in compliance with: Company values and policies, relevant laws and regulations, applicable contracts

Ex Inspection and audit packs for all electrical system, telecom system located in a classified hazardous areaInspects tests, electronic, mechanical, systems used to indicate, record, and control generating operations in conventional or power electric generating plant: Inspects meters, indicators to detect abnormal fluctuationsJob description:• Executes the specific inspections on materials, equipment and construction/installation activities on site. • Contribute to planning and organizing an EX inspection, data gathering and data recording system to meet current regulations.• Implement plans in a determined and efficient manner.• Report progress to the manager weekly.• Use the site maintenance management system, historical inspection reports, Drawing and publications to facilitate plan.• Log relevant information resulting from inspections in electronic format with full and accurate assessment feedback.• Performs visual inspections, dimensional test, checks rating and material for connection.• Performs tests of continuity, insulation resistance. • Checks installation of instruments. • Performs tests functional instruments. • Verify special processes and the relevant workers’ qualifications. • Witness the tests, controls and inspections carried out. • Ensure the correct implementation of the approved Inspection Test Plan.

Experienced with Monitoring, Inspection and Witness for all Instrument Installation, Calibration, Testing, such as Cable tray, Transmitters, Indicators, Gouge and Receiver, Fire and Gas system, Public Announcement, Control Valves, Telecommunication, Paga system, Distribution Panels, etc.Review for Installation/Construction Procedure, prepare Calibration and Test Procedure, and prepare Factory Acceptance Test Procedure. Job description:• Executes the specific inspections on materials, equipment and construction/installation activities on site. • Issues the relevant Quality Records and, when necessary, writes and sends to QC Supervisor non-conformances reports. • Checks cable laying and cable identification. • Performs all relevant loop checks. • Updates as built drawings. • Performs punch-listing operations. • Checks power transformers, switchboard, accumulator battery, sockets outlet, lighting system. • Performs visual inspections, dimensional test, checks rating and material for connection.• Performs tests of continuity, insulation resistance. • Checks installation of instruments. • Performs tests functional instruments. • Verify special processes and the relevant workers’ qualifications. • Witness the tests, controls and inspections carried out. • Ensure the correct implementation of the approved Inspection Test Plan.

Verify Fabrication Quality management systems, plans, procedures, and processes are in place. Implement project Construction Surveillance Program Review for Installation/Construction Procedure, prepare Calibration and Test Procedure, and prepare Factory Acceptance Test Procedure.Review Fabrication field inspection and test reports and ensure that inspections are carried out as per approved ITP requirementsJob description:• Executes the specific inspections on materials, equipment and construction/installation activities on site. • Issues the relevant Quality Records and, when necessary, writes and sends to QC Supervisor non-conformances reports. • Checks cable laying and cable identification. • Performs all relevant loop checks. • Updates as built drawings. • Performs punch-listing operations. • Checks power transformers, switchboard, accumulator battery, sockets outlet, lighting system. • Performs visual inspections, dimensional test, checks rating and material for connection.• Performs tests of continuity, insulation resistance. • Checks installation of instruments. • Performs tests functional instruments. • Verify special processes and the relevant workers’ qualifications. • Witness the tests, controls and inspections carried out. • Ensure the correct implementation of the approved Inspection Test Plan.

Perform testing base on mechanical completion or Inspection Test Record, Factory Acceptance Test procedure, and Material specification, prepares paper work electrical & instrument for necessary close out prior to commence testing, prepares dossier, arrange and make index list per subsystem.

Review Fabrication field inspection and test reports and ensure that inspections are carried out as per approved ITP requirements, verify fabrication quality management systems, plans, procedures, and processes are in place. Implement project construction surveillance program, preparing DOSSIER documentation

Ex Inspection and audit packs for all plant electrical, instrumentation and controls equipment located in a classified hazardous areaInspects tests, electronic, mechanical, and pneumatic instruments and systems used to indicate, record, and control generating operations in conventional or power electric generating plant: Inspects meters, indicators, and gauges to detect abnormal fluctuations

EEHA Inspection and audit packs for all plant electrical, instrumentation and controls equipment located in a classified hazardous area including high voltage equipment. Provide support to construction and start up. Verify installation meets code and specification requirements. Participate in client and system walk downs. Support punch list rectification and closure.

Verify Fabrication Quality management systems, plans, procedures, and processes are in place. Implement project Construction Surveillance Program Review for Installation/Construction Procedure, prepare Calibration and Test Procedure, and prepare Factory Acceptance Test Procedure.Review Fabrication field inspection and test reports and ensure that inspections are carried out as per approved ITP requirements

Support operations in ensuring that all critical systems/equipment are maintained in a safe and reliable working condition and operated within design parameters and that all functional testing are in accordance with the relevant and approved standards. Execute all assigned work according to plan, ensuring work is completed satisfactorily and recorded on the planned maintenance history records Report any failure or incidents affecting production or property of the Client to the Supervisor or a senior Technician

Execute all assigned work according to plan, ensuring work is completed satisfactorily and recorded on the planned maintenance history recordsReport any failure or incidents affecting production or property of the Client to the Supervisor or a senior TechnicianLiaise with other Maintenance and Production Technicians to ensure all work is executed, and within production considerationsMaintain a high degree of HS&E awareness