• Mig, welding work, fabrication, and woodworking• Simulate, design, and fabricate chair furniture• Many other products and equipment are also simulated, designed, and optimised• I am involved in design, simulation, and additive manufacturing projects• Optimisation and weight reduction of automotive parts using Catia, Abaqus, Tosca, and Catia Analysis for Proton Vendor in Shah Alam• Validation of a Sidestep Assembly for Land Cruiser Vehicles for the Saudi Arabia Project using Abaqus/Standard Simulation• Hand Brake Additive Manufacturing Project for hand brake automotive parts (Polypropylene and ABS material)• Simulation and validation to study the performance of the dust collector system and ID Fan for KKS Maokil, Johor• Other multicyclone projects (develop, design, simulate, optimise, and 3D print)• For one of the Proton vendors, simulation and validation of a front and rear mirror rack system• Training projects for design (CATIA) and simulation (Abaqus, Catia Analysis)• Driver for GRAB and Lalamove on a part-time basis• Car salesman for all model especially for Perodua, Proton & Toyota

Proton Sales Advisor and manage consumer & corporate sales for Proton cars as well as other brand such as Perodua & Honda.Part-time car salesman.

- Do trainings in CAD & CAE. More than 30 training delivered across Malaysia in which covered fundamental, intermediate and expert class for softwares: Catia V5, Catia Analysis, Abaqus, Tosca, SIMULIA Isight& Catia V6- Personal sales on softwares & trainings, more than 1/2 million Ringgit.- Assists sales about RM1mil- CAE and CAD projects, 6 projects handled:a. Insole analysis for athlete shoe - CAD modelling of an insole and perform static analysis of a shoe insole for athleteb. Lead Transfer Cast Static Analysis - Perform static analysis and study the lug, cast, and the lead material.c. Car Door Seal simulation - CAD Modelling of a car door rubber seal and perform static analysis on the rubber seal part using Catia Analysis and Abaqus and use a non-linear hyper elasticity materiald. Impact Analysis on a composite plate - 3D Modelling of a composite plate using Abaqus/CAE with up to 8 layers of composite, perform static analysis on the composite plate and impact analysis on a bended composite platee. Car Jack optimisation & weight reduction - Perform static analysis, topology optimization and thickness optimization on the new Proton car jack. Managed to reduce the weight to 2.1 kg from 2.9kg & maintain the stiffness.f. Reverse Engineering of MAI Van - Built CAD surface of a MAI Van using a RE technique & Assemble the CAD models from other members.g. Gear Analysis using Catia Analysis - Perform static analysis on the gear to see the stress and strain developed around the gear.- Responsible for pre-sales activity of Dassault Systemes products mainly in CAE & CAD domain.- Provide support to Abaqus customer & Catia customer accross Malaysia in Automotive, Oil & Gas and Aerospace industries, to assists and help the customers on their problems and difficulties using the software.• Certified Catia V5 Associate – Part Design• Certified Catia V5 Associate – Assembly Design• Catia V5 Mechanical Designer Specialist• Certified Catia V5 Expert – Assembly Design

• Responsibility in Finite Element Analysis (FEA), CAD modeling & CFD (Focused in CAE - Crash Analysis & Structural Analysis).• Responsible in managing and updating centre’s ISO 9001:2008 documentations.• Project involved:1. Apache Green Gas Technologies Sdn Bhd – Diesel Engine conversion to Natural Gas Engine project. Completed Stage 1 – patent search analysis to the related keyword and providing CAD data for the Engine Head.2. Waterspray Testing Equipment – To provide Optimized design of Waterspray testing equipment for Electric Motorcycle (EV).3. 8TCG – Pre-commercialization project for 8-Axis Toll Cutter Grinder4. CAE Projects – Crash Barrier project, Bus roll-over R66 and Analysis on Shock Absorber.5. CFD Projects – Toyota Vios Rear Spoiler, Waterspray water particle simulation.6. FEA Jobs – UN R66 Superstructure Bus Rollover Simulation for Truckquip, Pioneer Bus & Coach and Quality Bus & Coach.• Other Achievement:1. Guest Speaker for “Motoxpo KL 2012” in PWTC on 25th March 2012 presenting a paper titled: “The Significance of Engineering Simulation (CAE/CFD) in Compliance with MS2413”.2. Runner Up (Group) in poster contest titled: “Application of FEA Domain Road Crash Barrier Analysis” at ALTAIR Hyperworks Technology Conference (HTC) 2011, Kuala Lumpur.3. No. 3 winner in poster contest titled: “CFD Study on a Toyota Vios rear spoiler” at ALTAIR Hyperworks Technology Conference (HTC) 2012, Kuala Lumpur.

Involved in Turnkey projects and installation of equipments and machineries for more than 30 clients/projects:a.Biogas Plant (Methane Capture Plant, CH4) – 3,700 m3 tanks, 3,000 m3 floating tank, machineries, etc.b.De-Sulphurisation Plantc.Gas Engine (China, Germany)d.Thermal Deaerator Systeme.Water Treatment Plant – Clarifier, Pump System, Chemical Treatment System, SBRf.Waste Water Treatment Plant – Reactor, Clarifier, Sand Filter, Thickener, Chemical Treatment Systemg.Pipework: HDPE Pipe, API Seamless Pipe, Mild Steel Black Pipe, Stainless Steel Pipe, PVC Pipe, etc.h.Others: Cooling Tower, Vacuum Deaerator, Vacuum Oil Dryer, Pressure Sand Filter, Water Softener, Air Receiver, Vibrating Screen Separator, FRP Tanks, Electrical Works, Civil Works, Instrumentation, Etc.-Responsible on the mechanical, civil, electrical & instrument works.-Familiar with the PID Controller and PLC systems.-Designed pump system for water treatment plant projects.-Responsible in procurement-Supervised all workers, contractors and sub-contractors.-Prepared report for projects during and after.-Cum Commission Engineer for Biogas Plant, Thermal Deaerator, Vacuum Deaerator, Water Softener & Biogas Plant System.-Do planning using Microsoft Project.-Maintained the supplied systems for 1 year.-Troubleshoot and repair machineries, pumps and equipments.-Prepared Operation & Maintenance Manual for Thermal Deaerator system and Biogas Plant projects. -Supervised mechanical drawing and familiar with 2D and 3D drawing using AutoCAD and Solidworks.-Supervised & assisted for Pressure Vessel construction.-Familiar with ASME codes for UPV design and other codes such as ANSI, API, ASTM, BS, JIS and DIN.-Familiar with MIG, SMAW, GTAW and SAW welding process.-Conducted NDT after completion of fabricated pressure vessel – Radiographic Test, Dye Penetration.-Prepared MDR for pressure vessel constructed by the company.-Assisted in preparing the calculation for UPV - submission to DOSH.

PROJECT INVOLVED1. Project Title: Cadangan Pembangunan Perumahan Untuk Anggota-anggota Tentera Dan Kakitangan Awam Di Lembah Kelang – Kem Kementah 1. Client: Kementerian Pertahanan Malaysia. Procurement, Construction and Commissioning of the:• Liquid Petroleum Gas (LPG) Services.• Fire Protection Services (Clean Agent System) using • Air Conditioning Services at PPU 33/11kV Building.• Cold Water Pumping Station.• Fire Protection Services (Dry Riser System).2. Project Title: The Engineering, Procurement, Consruction And Commissioning Of Proposed Petronas Service Station At Lot Pt 55687, Hs(D) 81796, Bandar Baru Bangi, Seksyen 9, Daerah Ulu Langat, Selangor Darul Ehsan. Client: Petronas Dagangan Berhad3. Project Title : Sales Driven Activity For Petronas Service Station :1) PSS Jalan Genting Klang, Lot 5162, Jalan Genting Klang, Mukim Setapak 53300 Kuala Lumpur.2) PSS Kampung Melayu Subang, Lot PT 38368, Mukim Sungai Buloh, Kampung Melayu.3) PSS SS 17, Subang Jaya, Lot 7380 & Lot 7381, Jalan SS17/2, 47500 Subang Jaya.4) PSS Pendamar Indah 1, Lot PT 26061, Solok Pendamar Indah 1, Taman Pendamar Indah.5) PSS Axis, Lot 2, Jalan Sepadu, 25/123 Taman Perindustrian Axis, Seksyen 25, Shah Alam.Client: Petronas Dagangan Berhad4. Project Title: To supply labour, equipment and materials to set-up new COO office at Gas Malaysia Sdn Bhd HQ, Shah Alam, Selangor.Client: Gas Malaysia Sdn Bhd

Training Engineer (Mechanical) at Sungai Selangor Phase 2 Water Treatment Plant, Puncak Niaga (M) Sdn Bhd. The job scopes are: • Plan, coordinate and implement major repair and overhaul works for mechanical unit.• Planning and implementation of preventive and corrective maintenance of all mechanical equipments.• Making recommendations for corrective actions after troubleshooting of equipment faults• Give regular feedback to Section Senior Engineer on the mechanical equipment repair / maintenance status.• Advice Production Controller of mechanical isolations carried out, equipment repair status and safe operating procedures of mechanical equipment.• Advice technician to carry out installation, modification and commissioning of new mechanical equipments.• Provide technical specifications for material / spares to be purchased under mechanical unit.• Advice storekeeper to ensure that critical mechanical spares are available at store.• To coordinate, monitor and supervise works performed by other technicians in mechanical unit. To implement the predictive maintenance instruction data collection for critical equipment.• Plan and implement emergency repair works as requires by the plant.• Plan, coordinate and implement material requisition through computerized system.• Carry out other duties as may be directed by the M&E Senior Engineer from time to time.• Update mechanical equipment history and drawings.• Ensure that safety procedures and good housekeeping are followed.• Accept the responsibilities when transferred to other Sections of Departments from time to time as may be directed by the Management as part of the multiskilling training or exposure.• Participate in problem solving and work for continuous improvements.

Industrial Training at Centralised Utility Facilities (CUF), Petronas Gas Berhad, Kerteh, Kemaman, Terengganu Darul Iman. Familiar with :· Cogeneration Plant· Demineralised Water Plant· Air Separating Unit (ASU) Plant· Auxiliary Plant· Effluent Treatment PlantThe company supplying the Power Electricity, Steam, Demineralised Water, Oxygen and Nitrogen liquid gas and Effluent Treatment. Involved in engineering inspection such as :· DOSH inspection on Filter (Demineralised Water Plant)· Hot Gas Preventive Inspection (HGPI) turnaround (Cogeneration Plant)· NDT work inspection on Gas Turbine impeller (Cogeneration Plant)