Fotis Plessas Email & Phone Number
Who is Fotis Plessas? Overview
A concise factual answer block for searchers comparing this professional profile.
Fotis Plessas is listed as AMS/RF & mmWave microelectronics at University of Thessaly, based in Greece, Greece, Greece. AeroLeads shows a matched LinkedIn profile for Fotis Plessas.
Fotis Plessas previously worked as Alternate Chairman ECE dept. at University Of Thessaly and Full Professor ECE dept. at University Of Thessaly. Fotis Plessas holds Master, Bussines Administration from University Of Patras.
Email format at University of Thessaly
This section adds company-level context without repeating Fotis Plessas's masked contact details.
Review company-level records connected to Fotis Plessas before choosing the right outreach path.
About Fotis Plessas
Fotis Plessas is one of the co-founders and CTO of NanoZeta Technologies ltd. He is professor at the University of Thessaly, Greece, where he is also a faculty member and founder of the Circuits and Systems lab.From 2013 till today he has cooperated several times with the Industrial Systems Institute (ISI/Athena RC), the Institute of Communications and Computer Systems (ICCS/NTUA), Theta Microelectronics, and HDL Design House. Within this context he has been involved in several projects with major US, European, and Middle East semiconductor companies which are covered by confidentiality agreements.From 2007 to 2013, he was with Analogies S.A, as a Senior Engineer and Manager responsible for the development of high-speed wired and wireless connectivity cores for SoC solutions (e.g. USB3.0 PHY, DDR2/3 PHY and 60GHz PLL). He has successfully taped out complex high frequency and high speed ASICs. Prior to Analogies he was involved in several research activities at the Applied Electronics Laboratory and the Industrial Systems Institute working mainly in the area of RF communication circuits and analog and mixed-mode circuit design. He has participated to a great number of European and National projects both research & development, in the areas of his research.His research interests focus on the design, analysis and implementation of Analog, RF and millimeter-wave circuits, PLL- and injection-locking- based frequency synthesizers. He has extensive experience in wired and wireless communication systems engineering. He is the author or co-author of more than 34 journal and conference papers and he also holds two patents. He is a member of IEEE, and IEEE CAS society and member of the founding committee of the Greece IEEE CE Society Chapter.He has received his Ph.D. in Electrical Engineering from Patras University, Greece. He holds an MBA and a B.S. degree in Physics from the same university.Please note that I network only with people that I'm currently working, or have worked with in the past, and with people that I do know personally.
Listed skills include Analog Circuit Design, Ic, Cmos, Simulations, and 23 others.
Fotis Plessas's current company
Company context helps verify the profile and gives searchers a useful next step.
Fotis Plessas work experience
A career timeline built from the work history available for this profile.
Full Professor Ece Dept.
CurrentTeaching Advanced Electronics, Analog Circuits lab, Circuit Analysis and Analog, Mixed Signal and RF CircuitsResearchProject Management
Associate Professor Ece Dept.
Teaching Advanced Electronics, Analog Circuits lab, Circuit Analysis and Analog, Mixed Signal and RF CircuitsResearchProject Management
Assistant Professor Ece Dept.
Teaching Advanced Electronics, Analog Circuits lab, Circuit Analysis and Analog, Mixed Signal and RF CircuitsResearchProject Management
Lecturer (Hellenic Presidential Decree 407/80) Ece Dept.
Teaching Electronics, Circuit Analysis and Analog VLSI at the Department of Electrical & Computer Engineering
Director
Current
Co-Founder & Cto
CurrentDesign, development, and measurement services for Analog, RF, Mixed Signal and mmWave circuits and systems, especially low jitter PLLs.
Ams/Rf Design Consultant
Leading a contractor team that built several analog IP blocks for a customer in the processors and microcontrollers market, in 40nm and 28nm technologies. IP included:- Integer and fractional PLLs for use as system clocks in cores and PHYs.- High Speed USB PHY and a Full Speed USB Transceiver.
Rf Systems Engineer
Design of a multiband, adaptive, radio-frequency (RF) transceiver architecture for carrier aggregation, suitable for: Demonstrating carrier aggregation of up to 5 components carriers (CC), Demonstrating carrier aggregation of FDD and TDD, Demonstrating carrier aggregation between licensed and unlicensed bands, Demonstrating MIMO capabilities
Mmwave Design Engineer
Design of a 80GHz subharmonic (x4) mixer for an E-band / mmwave CMOS RFIC/MMIC, for an industrial partner
Ams/Rf Design Consultant
Leading a team that built several low jitter fractional-N/integer-N PLL IP blocks for a customer in the Bluetooth market, in 55nm technology.
Adjunct Applications Professor
Teaching Analog Electronics and Computer-Aided Electronic Circuit Simulation at the Department of Electrical Engineering
Adjunct Assistant Professor
Teaching Wireless Networks at the Department of Computer Science
Analog Desing Consultant
Participation in the Collaborative R&D project of MENELAOS (Micro Sensor Technologies for Navigation Space Applications), in the si-Cluster ‘Hellenic Space Technologies’ framework funded by the Greek General Secretariat for Research & Technology.
Engineering Manager
- Design and leading the development of a USB 3.0 PHY IP at 65nm
- Design a wide variety of analog circuitry ranging from Clock and Data Recovery, PLLs and Data Converters, VCOs, phase detectors, BGR, etc. Design and modeling high speed CMOS. Experience in high speed serial to.
- Leading all stages of the RF, high speed Analog & Mixed Signal projects, including requirements gathering, architecture, design, testing, customer training and support.
Ic Design Engineer
- Working mainly in the area of RF communication circuits and analog and mixed-mode circuit design. I'm also engaged in the research and development of high-speed analog and digital ICs for optical communication systems.
- Design and leading the development of a DDR2 Memory PHY
- Design and leading the development of a 60GHz Frequency Synthesizer
Adjunct Assistant Professor
Teaching Electronics I & II, and Digital Telecommunications at the Department of Informatics Technology and Telecommunications
Adjunct Assistant Professor
Teaching Measurement Technology andSpecial Topics in Telecommunications (Fiber Optics Communications)
Adjunct Lecturer
Teaching Electronics, Communications, and Circuit Analysis at the Department of Telecommunications Science and Technology
Adjunct Applications Professor
Teaching Electroacoustics and Digital Signal Processing at the Department of Sound and Musical Instruments Technology
Senior Rfic & Systems Engineer
- Participation at the research program with title “PAVE97”. A frequency hoping spread spectrum modem at 2.45 GHz was implemented.
- Participation at the research program with title “MAD”, with main objective to develop a HIPERLAN/2 demonstration platform.
- Participation at the research program with title “High-performance wireless fieldbus in industrial-related multimedia environment (R-FIELDBUS)”, with main objective to develop a 2.5-GHz RF front-end for wireless link.
- Participation at the research program with title “Low-Cost Catastrophic Event Capturing (LOCCATEC)”, with main objective to develop a data recording and transmission system (2.5GHz) for building damages caused by.
- Design and development, of an integrated Low Noise Amplifier for Bi-CMOS technology at high frequency (5GHz).
- Design and development, of a Dual Loop Frequency Synthesizer for 5-GHz WLANs.
Rfic Design Engineer
Design and implementation of microwave-circuits
Adjunct Applications Professor
Teaching Electroacoustics (laboratory) at the Department of Sound and Musical Instruments Technology
Fotis Plessas education
Master, Bussines Administration
Ph.D., Telecommunication Electronics
Bachelor Of Science, Physics
Frequently asked questions about Fotis Plessas
Quick answers generated from the profile data available on this page.
What company does Fotis Plessas work for?
Fotis Plessas works for University of Thessaly.
What is Fotis Plessas's role at University of Thessaly?
Fotis Plessas is listed as AMS/RF & mmWave microelectronics at University of Thessaly.
Where is Fotis Plessas based?
Fotis Plessas is based in Greece, Greece, Greece while working with University of Thessaly.
What companies has Fotis Plessas worked for?
Fotis Plessas has worked for University Of Thessaly, Circuits And Systems Lab, University Of Thessaly, Nanozeta Technologies Ltd., Hdl Design House, and Industrial Systems Institute / Research Centre Athena.
How can I contact Fotis Plessas?
You can use AeroLeads to view verified contact signals for Fotis Plessas at University of Thessaly, including work email, phone, and LinkedIn data when available.
What schools did Fotis Plessas attend?
Fotis Plessas holds Master, Bussines Administration from University Of Patras.
What skills is Fotis Plessas known for?
Fotis Plessas is listed with skills including Analog Circuit Design, Ic, Cmos, Simulations, Analog, Mixed Signal, Matlab, and Asic.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trial