Gagan Handa Email & Phone Number

Vadodara, Gj, In

India

Vadodara, Gujarat, India

Designation: Principal EngineerProjects Handled:a) Tobolsk, RussiaAbout Project: It is a detailed engineering project. The plant, part of the huge complex being built by Sibur subsidiary ZapSibNeftekhim, will also produce 500,000 tpa of propane and 100,000 tpa of butadiene from feedstocks of ethane, propane and n-butane, all building blocks for the plastics industry.Area Handled: Regenaration unit, C3/C4 Separation, C3 Hydrogenation, C8/C9 Separation unit.Role –Area Lead… Show more Designation: Principal EngineerProjects Handled:a) Tobolsk, RussiaAbout Project: It is a detailed engineering project. The plant, part of the huge complex being built by Sibur subsidiary ZapSibNeftekhim, will also produce 500,000 tpa of propane and 100,000 tpa of butadiene from feedstocks of ethane, propane and n-butane, all building blocks for the plastics industry.Area Handled: Regenaration unit, C3/C4 Separation, C3 Hydrogenation, C8/C9 Separation unit.Role –Area Lead Engineer Study of Equipment Layout  Study the feasibility of Piping Study and Piping Layout. Nozzle orientation of column & vessels. Provide technological loading information to civil.  Prepare nozzle orientation drawings for horizontal & vertical vessels, reactor, columns, exchangers.  Checking of vendor drawings & provide comments.  Checking Instrumentation data and validating the same in the model.  Prepare isometrics along with bill of materials.  Planning and scheduling of isometrics along with quality.  Deliver progress report of work to the higher authorities & management.  Done Squad check for civil drawings for foundation and Technological structure  Perform model review at various stages of project within department as well as with other disciplines to resolve clashes, queries & applicable changes. Show less

Vadodara Area, India

b) Assaluyeh-14, IranAbout Project: It was a feed project. The plant will incorporate a 1.26mn tons/year cracker and 1.23mn t/y aromatics plant.Area Handled: Process steam system, Oil fractionation unit, Feed preheating unit, Condensate collecting system & Cold blow down systemRole –Area Lead Engineer Study of Equipment Layout  Study the feasibility of Piping Study and Piping Layout. Nozzle orientation of column & vessels. Provide technological loading information to civil. … Show more b) Assaluyeh-14, IranAbout Project: It was a feed project. The plant will incorporate a 1.26mn tons/year cracker and 1.23mn t/y aromatics plant.Area Handled: Process steam system, Oil fractionation unit, Feed preheating unit, Condensate collecting system & Cold blow down systemRole –Area Lead Engineer Study of Equipment Layout  Study the feasibility of Piping Study and Piping Layout. Nozzle orientation of column & vessels. Provide technological loading information to civil.  Prepare nozzle orientation drawings for horizontal & vertical vessels, reactor, columns, exchangers.  Checking of preliminary vendor drawings.  Planning and scheduling of bill of materials during the feed.  Deliver progress report of work to the higher authorities & management.  Perform model review at various stages of project within department as well as with other disciplines to resolve clashes, queries & applicable changes. Show less

Al-Khobar, Saudi Arabia.

1) M/s Fluor Arabia Ltd. Sep 2013 – May 2014Designation: Sr. Piping EngineerProjects Handled:a) SADARA ProjectAbout Project: This project is a joint venture of DOW & Saudi Aramco. It’s a Petrochemical Plant to be constructed in Jubail II, Saudi Arabia. Area Handled: Port area - Naphtha, Polyols and PE Cracker.Role – Design Supervisor: Responsible for isometric checking  Planning and scheduling of isometrics along with quality  Modeling and routing of some… Show more 1) M/s Fluor Arabia Ltd. Sep 2013 – May 2014Designation: Sr. Piping EngineerProjects Handled:a) SADARA ProjectAbout Project: This project is a joint venture of DOW & Saudi Aramco. It’s a Petrochemical Plant to be constructed in Jubail II, Saudi Arabia. Area Handled: Port area - Naphtha, Polyols and PE Cracker.Role – Design Supervisor: Responsible for isometric checking  Planning and scheduling of isometrics along with quality  Modeling and routing of some fresh new lines  Reporting the progress report of project work  Modification of P&ID as per final designed Isometrics & final P&ID yellow off  Checking equipment nozzle and orientation with respect to vendor drawing  Sending fresh and revised isometrics  Checking Instrumentation data and validating the same in the model. Show less

Gurgaon, India

Projects Handled:a) Nghi Son Refinery and Petrochemical LLC, VietnamJob Profile:Handled Kerosene Hydro Desulfurization (KHDS). Done piping transportation & piping study, equipment layout modification, prepare nozzle orientation of stripper column, exchangers, pumps,b) Sohar Refinery Expansion Project, OmanJob Profile:Handled Delayed Coker Unit (DCU). It was an expansion project and the scope of work includes piperack transposition, Piperack loading information, Bill… Show more Projects Handled:a) Nghi Son Refinery and Petrochemical LLC, VietnamJob Profile:Handled Kerosene Hydro Desulfurization (KHDS). Done piping transportation & piping study, equipment layout modification, prepare nozzle orientation of stripper column, exchangers, pumps,b) Sohar Refinery Expansion Project, OmanJob Profile:Handled Delayed Coker Unit (DCU). It was an expansion project and the scope of work includes piperack transposition, Piperack loading information, Bill of Materials, Battery limit drawings.c) Jurong Aromatic Complex, SingaporeJob Profile:1) Preparation of Plot Plan, Key Plan, Equipment and Piping Layout Drawings.2) Preparation of Nozzle Orientation drawings. Review vendor document & drawings.3) Preparation of stress isometrics4) Review Process Data sheet.5) Material Take off activity for 30%,60%, 90% stage.6) Updating Civil Load data required for Civil/Structural Design7) Check equipment with respect to mechanical data sheet (MDS), equipment layout & Master P &ID8) Done 90% model review within Department and resolved queries and applicable changes. 9) Done Squad check for civil drawings for foundation and Technological structure.10) Presently doing checking of Isometrics and maintaining the quality and quantity of job work.c) Indian Strategic Petroleum Reserves LimitedJob Profile:1) Study of Equipment Layout2) Study the feasibility of Piping Study and Piping Layout.3) Review Process Data sheet.4) Preliminary & Final MTO for the proposal project.5) Updating Civil Load data required for Civil/Structural Designe) Yanbu Export Refinery Project, Saudi ArabiaJob Profile:1) Study of Equipment Layout2) Study the feasibility of Piping Study and Piping Layout.3) Review Process Data sheet. Show less

Gurgaon, India

Project Handled:a) Gloriosa Mock Project (Feb'10- Till Date)(Extension of Taneco Refinery and petrochemical complex in Nizhnekamsk, Tatarstan, Russia)Working as Checker for Sulfur Recovery Unit. Responsible for isometric checking, final P&ID yellow off, planning and scheduling of isometrics along with quality.b)Total Deep Conversion Project at Port Arthur Refinery, Aliso Viejo (Nov’09- Jan'10)Working as Checker (Design Engineer) for Sulfur Recovery Unit and… Show more Project Handled:a) Gloriosa Mock Project (Feb'10- Till Date)(Extension of Taneco Refinery and petrochemical complex in Nizhnekamsk, Tatarstan, Russia)Working as Checker for Sulfur Recovery Unit. Responsible for isometric checking, final P&ID yellow off, planning and scheduling of isometrics along with quality.b)Total Deep Conversion Project at Port Arthur Refinery, Aliso Viejo (Nov’09- Jan'10)Working as Checker (Design Engineer) for Sulfur Recovery Unit and Coker Area. Responsible for isometric checking, final P&ID yellow off, planning and scheduling of isometrics along with quality, modeling and routing of some fresh new lines, reporting the progress report of project work, modification of P&ID as per final designed Isometrics, working on steam manifold areas, checking equipment nozzle and orientation with respect to vendor drawing, sending fresh and revised isometrics, checking Instrumentation data and validating the same in the model. Show less

Gurgaon, India

c) Taneco Refinery and petrochemical complex in Nizhnekamsk, Tatarstan, Russia (Feb’08- Oct’09)Worked as Area Lead for OSBL Area. Scope of work involved prepares Interconnecting Pipe Rack Piping Layout, Pipe Rack Estimation, Pipe spacing, Flare Line Header & typical connection, Battery limit valve, Platform & ladder arrangement. Pump house piping, KO drums piping and Storage tank piping as per Russian standards. We have done routing of major large bore and critical lines.d) Sunoco… Show more c) Taneco Refinery and petrochemical complex in Nizhnekamsk, Tatarstan, Russia (Feb’08- Oct’09)Worked as Area Lead for OSBL Area. Scope of work involved prepares Interconnecting Pipe Rack Piping Layout, Pipe Rack Estimation, Pipe spacing, Flare Line Header & typical connection, Battery limit valve, Platform & ladder arrangement. Pump house piping, KO drums piping and Storage tank piping as per Russian standards. We have done routing of major large bore and critical lines.d) Sunoco Toledo Refinery, Ohio (April ’07-Feb’08)Worked as Design Engineer for Sulfur Recovery Unit. It was a revamp job which involves lots of Tie-in and site reroutes. Scope of work involved interconnecting Pipe rack, Horizontal vessel piping, Pump Piping, Vertical vessel piping. Show less

Faridabad Area, India

Project Handled: 1) GGS-2 Rudrasagar, Assam (Client: ONGC)Job Responsibilities:a. Designed and Developed Equipment layoutsb. Designed and developed Piping layoutsc. Prepared Isometric Drawings with Bill of Material from Piping GADsd. Prepared Tendering and Bulk Material Take off (MTO) from P & IDs and equipment layouts.e. Prepared Nozzle Orientation of process Equipmentf. Monitored Equipment with respect to mechanical data sheet (MDS), equipment layout &… Show more Project Handled: 1) GGS-2 Rudrasagar, Assam (Client: ONGC)Job Responsibilities:a. Designed and Developed Equipment layoutsb. Designed and developed Piping layoutsc. Prepared Isometric Drawings with Bill of Material from Piping GADsd. Prepared Tendering and Bulk Material Take off (MTO) from P & IDs and equipment layouts.e. Prepared Nozzle Orientation of process Equipmentf. Monitored Equipment with respect to mechanical data sheet (MDS), equipment layout & Master P &IDg. Line routing with respect to Equipment Layout and master P &IDh. Reviewed P & IDs, Layouts, GADs, Isometrics & various piping related drawings and documents.i. Monitored the material take off at various stages (Bulk) Show less

Mumbai Area, India

Project Handled:1) IOCL Refinery, Haldia, West BengalJob Responsibilities:I was involved as Trainee Piping Engineer for IOCL Refinery. Responsible for:1) Checked equipment with respect to mechanical data sheet (MDS), equipment layout & Master P &ID2) Line routing with respect to equipment layout & Master P & ID3) Developed and monitored equipment and Piping arrangements in PDS4) Updating Civil Load data required for Civil/Structural Design.

Mumbai Area, India

Project Handled:1) Reliance PTA-III, Hazira.2) Kashagan Experimental Development Project, Russia.Job Responsibilities:I was deputed on an assignment to Aker Kvaerner Powergas Ltd. & Petrofac Engineering India Ltd., Mumbai. Responsible for Support activities for all areas, marking of support tags on Isometrics and Piping Layout, responsible for preparing SPS and CPS Sketches, Control special support nos. for all areas, checking of support tags

Pgd, Piping Technology

B.E, Chemical

Education record

Education record