• Managed the engineering & design for plant modifications to add optical sortation equipment to enhance product quality at a coffee bean roasting facility.• Performed electrical system analysis and arc-flash analysis for a Northwestern food processing facility recommending modifications to the main service protection elements.• Prepared detailed electrical construction estimate and constructability review for rotary UPS system replacements in a mission critical government facility. • Prepared a study and analysis of separation of facilities to change use of a large existing industrial facility to a use for movie and film production.• Managed the engineering and design for HVAC modifications to the Chilled Roll area of a food processing production facility• Performed electrical system analysis and device protection analysis for electronic breaker settings to coordinate an installation for a Northwestern Utility company.• Managed the engineering & design for a plant addition to a pro-biotic manufacturing facility in Mexico for a US company

• Managed the engineering, design, planning, scope control and budgets for East Coast operations.• Engineering Manager for carbon fiber plant expansion, Toray Industries, Decatur, Alabama. Engineered for a new, fourth production line of grassroots addition to produce certified carbon fiber for aeronautical use.• In charge of design, engineering and construction support for confectionary project for Morinaga Foods America in Mebane, North Carolina.

• Engineering, design, planning, budgeting and construction administration support for the Federal Aviation Administration, Department of Transportation. National Airspace System Implementation Support Contract.• As Level II (NISC-II), provided engineering and construction of Air Traffic Control Towers (ATCT), Terminal Radar Approach Control Facilities (TRACON), Metroplex Control Facilities (MCF), Air Route Traffic Control Centers (ARTCC), and Remote Controlled Air-Ground Sites (ACAG) for the Federal Aviation Administration as the Office of Primary Responsibility for the Eastern District of the United States and its protectorates. • In charge of design, engineering and construction management for various infrastructure projects for the Federal Aviation Administration Eastern District and the Department of Transportation, nationally.

• As Senior Project Engineer for Electrical I/C, engineered for the design and construction of grassroots cement plant addition for American Cement, Florida, and performed detailed power system study, equipment purchasing, instrumentation and electrical design for new cement plant addition.• As Senior Project Engineer for Electrical I/C, engineered for the design and construction of grassroots cement plant addition for Texas Industries, New Braunfels, Texas, and performed detailed power system study, equipment purchasing, instrumentation and electrical design for new cement plant addition.• As Senior Project Engineer for Electrical I/C, engineered for the design and construction of grassroots cement plant addition for Florida Rock Industries, Florida, and performed detailed power system study, equipment purchasing, instrumentation and electrical design for new cement plant addition.• As Senior Project Engineer for Electrical I/C, engineered for the equipment design and construction of grinding circuit SAG mill, ball mill facility for grassroots copper mine addition for Rosemont Industries, Pima County, Arizona, and performed detailed equipment design and purchasing, instrumentation and electrical design for new grinding circuit.• As Senior Project Engineer for Electrical I/C, engineered for the design and construction of grassroots cement plant addition for Keystone Cement, Bath, Pennsylvania, and performed equipment purchasing, instrumentation and electrical design for new cement plant addition.

• Executive in charge of all engineering for full service engineering office dedicated to projects in the Western Hemisphere. In charge of P/L for engineering services and all contracts. Control of projects schedule, scope and budgets.

• United States Department of Energy, Paducah, Kentucky and Portsmouth, Ohio, Senior Electrical Cost Engineer for detailed U.S. Army Corps of Engineers construction estimate and constructability review for two nuclear enrichment plants. PII estimating per COE standard formats.

• Senior Electrical & I/C Engineer for the pentane conversion of polyisocyanuate insulation plants for Johns Manville in Bremen, Indiana; Jacksonville, Florida; and Cornwall, Canada. Designed for a grassroots polyisocyanuate plant in Fernley, Nevada for Johns Manville.• Senior Electrical I/C Engineer for the pentane conversion of polyisocyanuate insulation plants for Atlas Roofing in Diboll, Texas; Northglenn, Colorado; and Camp Hill, Pennsylvania.• Senior Electrical I/C Engineer for the pentane conversion of a polyisocyanuate plant in Texarkana, Texas for Celotex.• Project Manager, Senior Electrical I/C Engineer for EGO Products. Project Manager for 60,000-square-foot production plant addition.• William L. Bonnell Industries, Project Manager for the construction of renovations to the Press 10 and Press 9 aluminum extrusion lines. The project included setting up a separate group for self-performing steel erection.• First United Methodist Church, Project Manager for the construction of a new fellowship hall and classroom building. Project included demolition of existing structures and attendant abatement for ACM.

• Owner’s Representative for construction of $360M base film polyester plastic plant.

• U.S. Army Corps of Engineers, Marietta, Georgia, Project Manager for construction of renovations to South Atlantic Division Material Testing Laboratory.• Veterans Administration, Atlanta, Georgia, Project Manager for construction of renovations to psychiatric/psychotic ward of the hospital. Project Manager for construction of new emergency and trauma center.

• Fort Drum, Syracuse, New York, Senior Electrical Engineer for renovation of base barracks building.• William Beaumont Medical Center, El Paso, Texas, Senior Electrical Engineer for remodeling and renovation of the existing facility to gain accreditation. Performed physical needs assessment prior to detailed engineering design work.• Fort Hood, Killeen, Texas, Senior Electrical Engineer for replacement of chiller plant for the base barracks facility, flight simulator facility, NCO club and base PX.• Blanchfield Army Community Medical Center, Fort Campbell, Kentucky, Senior Electrical Engineer for renovation of buildings B and C, including isolation, pharmacy, triage, surgery, and main lobby areas.• Fort Riley, Kansas, Senior Electrical Engineer for replacement of chiller plant for Building 7210.

• City of Atlanta, Department of Water, Project Manager for the design of the electrical power and instrumentation for improvements to the Chattahoochee Station Water Plant.• City of Charlotte, Department of Public Utilities, Project Manager for the architectural and electrical design of a new raw water pumping station in Mecklenberg County, North Carolina.• Committee for Olympic Development Atlanta streetscape improvements projects for International Boulevard including a new park, new street and pedestrian lighting and new traffic signalization. Atlanta Committee for the Olympic Games - Stone Mountain, Georgia, Project Manager for the mechanical, electrical and plumbing design for the cycling and archery venue.

• Argonne National Laboratories, Chicago, Illinois, inspection of facilities on site, assessment of facility condition and preparation of a needs analysis report for the Chemistry Facility, High Energy Physics Facility, Nuclear Physics Facility, Imaging and Publications Facility.• Argonne National Laboratories, Chicago, Illinois, inspection and thermal infrared analysis of the on-site electrical distribution system. Distribution systems of 2.3KV, 5KV and 14.5KV were the subject of analysis.• Georgia Institute of Technology, Atlanta, Georgia, inspection and facility assessment of Skiles Hall for suitability of conversion for Olympic venue activities.• George Washington University, Washington, DC, inspection and facility assessment of all campus-owned housing.• Tulane University, New Orleans, Louisiana, inspection and facility assessment of 22 on-campus housing units.

• Lockheed Aeronautical Systems Co., Marietta, Georgia, Project Manager for design and construction of computer center serving the F-22 Advanced Tactical Fighter Program. The computer center housed in nominally 6,600 square feet of raised floor area was constructed to DIAM 50-3 (Defense Intelligence Agency Manual) standards.• Lockheed Aeronautical Systems Co., Marietta, Georgia, Project Manager for transition of equipment, laboratories and programs from California to Georgia. Hydraulic test and material test laboratories were re-established in buildings B-4 and L-7. A 22,500-square-foot addition was constructed a building L-9 to house material test laboratories this film and chemistry laboratories.• Lockheed Aeronautical Systems Co., Marietta, Georgia, Project Manager for replacement and renovation of the building L-11 chilled water plant with the addition of a nominal 680-ton chiller and attendant cooling tower, and replacement of a 446-ton cooling tower.• Lockheed Aeronautical Systems Co., Marietta, Georgia, Project Manager for expansion and replacement of electrical underground feed network servicing buildings L-11, L-7, and L-9. Attendant expansions of the main substations at L-6 were also affected.

• United Airlines, Washington, DC, Project Manager for a new 200,000-square-foot data processing/reservation center with sophisticated redundant support systems. Communication via satellite, microwave and fiber.• United Airlines, Washington, DC, Project Manager for midfield terminal at Dulles International Airport.• United Airlines, Washington, DC, Project Manager for a new Ground Vehicle Maintenance Facility.• United Airlines, John F. Kennedy International Airport, New York, Project Manager for the renovation of existing Hangar #4 to accommodate 747-SP 400 aircraft and existing office and service support areas.• First Citizens Bank & Trust Company, Raleigh, North Carolina, Project Manager for 86,000-square-foot design/build bank operations and computer center.• Bank South Corporation, Atlanta, Georgia, Design and Engineering Project Manager for the renovation of an existing 120,000-square-foot building into a bank operations center.• Lockheed Space Operations Company, Cape Canaveral, Florida, Senior Electrical Engineer for this 300,000-square-foot automated storage and retrieval facility supporting the current space shuttle program.• American Honda Motor Co., Alpharetta, Georgia, Project Manager for Rider Education Center for off-road recreational vehicles. The project included a simulator for motorcycle and ATV dynamic training.• Cooper Tools (Lufkin Rule Plant), Apex, North Carolina, Project Manager for flammable storage warehouse. The project featured automated guided vehicle system to transfer product to the main warehouse.• Barnett Bank, West Palm Beach, Florida, Project Manager for design and construction of a regional bank operations center in Palm Beach, Florida. A computer operation witching the building core and the facility was supplied with a state-of-the-art security system. The facility also housed proof and warehouse functions for the bank.

• In charge of the Engineering and Inside Sales departments for the Western Hemisphere operations of this multinational manufacturing company. Power Products department commodities included combination pressure reducing/desuperheating valves and steam and water desuperheaters.

• Diamond Shamrock Corporation, Deer Park, Texas, Project Manager for a grassroots combined cycle power plant, firing on natural gas and hydrogen fuels with provisions for future number 2-distillate oil fuel.• Oklahoma Gas and Electric Co., Project Manager for wastewater collection, treatment, and disposal facilities for Seminole Steam Electric Station, Horseshoe Lake Steam Electric Station, Mustang Steam Electric Station, Muskogee Steam Electric Station, and Belle Isle Steam Electric Station.• Aluminum Company of America, Project Manager for Warrick Power station Units 1 through 4 firing western coal project included studies and redesign of existing plant facilities for increased efficiencies.

• Fort Calhoun Nuclear Power Station, system commissioning and subsystem design coordination and interface with consultant and engineering contractors for pressurized water reactor and nuclear steam supply system with a capacity of 1420 MWt.• North Omaha Power Station, redesign and performance upgrading of existing facility, operational supervision, construction coordination, maintenance, performance testing and interface with consultant engineering contractors for a five-unit steam electric station firing western cola.• System Load Dispatch Center, operational supervision performance testing and maintenance of two computer-controlled General Electric Frame MS 7000 IC turbines firing natural gas.