Quality Assurance Manager and Safety. Inspect aircraft maintenance, Safety Representative

Quality Control Technical Inspector and Safety Representative for AH-64 Helicopters. Performing scheduled and unscheduled maintenance.

Providing aviation technical support for US Government contacts. Consulting and hands on. Our company supports numerous activities, such as but not limited to: Safety, Quality, Production, External/Internal Auditing, Deployment, as well as Scheduled, Unscheduled, Line and Back Shop Maintenance.We can be reached via: https://gmtsupportservicesllc.com/Veteran Owned and Operated

Performed Quality Assurance duties for FAR 145 maintenance repair facility

Maintained Bell 206 and Bell 407 medical air ambulances and Base Manager

Cessna Caravan FSR for DoS/DoS in Chad Africa

AMT instruction for DoD SATMO and Iraqi MoDSpecializing in Basic Electrical Repair

MARSS-CLS program maintaining KA 300/350 aircraft

DOM for FAR 145 air taxi service. 14 each Cirrus 22 aircraft at 8 remote locations

Senior AMT for A-29 Fixed wing aircraft

Sr. AMT/LAE-A&P/IA Inspector: Supported Super King Air 300 and 350 with ISR platforms at two work locations. Performed phase inspections, scheduled and unscheduled maintenance, repairs, and testing of all aircraft systems, ground support equipment and systems test equipment. Performed duties as Weight & Balance Technician utilizing AWBS. Received assignments and instructions verbally or in writing from (DOM) Director of Maintenance. Assisted in maintaining a stressing free, safe work practices and good housekeeping. Reviewed current graphs, charts, diagrams, bulletins, manuals and memoranda required to perform unusual work, to solve unusual problems or to determine current tolerances, methods or standards. Maintained aircraft to FAA and US Army standards. Position required DoD Secret security clearance.

Sr. AMT/LAE-A&P/IA Inspector and Site Supervisor: Supported three Bell-212 helicopters at two remote work sites. Performed duties as Site supervisor and Maintenance Test Flight Engineer; worked daily with primary contractor, Bear Defense Services, to insure flight schedules were met to maintain customers satisfaction. Managed quality assurance, environmental, health & safety programs, policies, processes, procedures and controls as required. Provided oversight of work area to enforce compliance and safety. Assisted primary contractor in maintaining performance and quality of maintenance for dry leased aircraft. Established work schedules for maintenance teams and managed aircraft maintenance. Maintained aircraft tot FAA and Abu Dhabi Aviation standards. Position required DoD Secret security clearance.

Sr. AMT/LAE-A&P/IA Quality Control Technical Inspector for DoS Air Wing in Iraq. Aircraft supported were UH-1N, UH-1(ST), MD 530, S61N and DHC-8-300. Maintenance Test Flight Engineer. Monitored and evaluated maintenance personnel and maintenance actions performed, inspected aircraft equipment condition for safety and ensured compliance with technical directives and local SOP’s. Reviewed aircraft Historical records, log book entries, TMDE, AOAP, AWIS (Air Wing Information System) and W&B for accuracy and compliance. Performed duties as Weight & Balance Technician utilizing AWBS. Advised and assist maintenance personnel in the use of technical data to troubleshoot, repair, or replace malfunctioning systems. Verified proper procedures, tools and technical data are being used while conducting maintenance. Conducted audits and surveillance of maintenance programs to ensure compliance with the Quality Control and Maintenance Plans. Monitored local Oil Analysis Program and ensured proper procedures and policies are being adhered to. Performed other duties as may be directed by responsible authority, in the pursuit of an effective Quality Control and Assurance Program to ensure a satisfactory end product. Maintained aircraft to FAA and DoS Air Wing standards. Position required DoS Secret security clearance.

TASM-E DynCorp Maintenance Supervisor (DOM), for European and North African Region. Work daily with Regional Manager and senior management to assure production schedules were accomplished, quality assurance, environmental, health and safety programs, policies, processes, procedures and controls were implemented at all times. Provided oversight of all site operations and infrastructures to insure compliance and safety. Assisted Regional Manager in maintaining performance and quality. Complied with established standards and governmental agency guidelines insuring customer satisfaction. Assisted in establishing and setting the processes of production accomplishment within functional area of program management. Supporting LUH-72, AH-64, OH-58D, UH-60 and CH-47 series helicopters. Ten remote site locations and one primary maintenance facility. Managing 120 plus personnel. Supported Scheduled and Unscheduled maintenance. As well as providing Allied Shops support. Work Site Safety Officer. Organized and Managed the movement of aircraft via, truck, cargo plane, river barge, and ocean vessel; such as Rota, Spain, Amsterdam, Holland and Antwerp, Belgium. Maintained aircraft to DoD US Army standards. Position required DoD Secret security clearance.

Sr. AMT/LAE-A&P/IA Inspector and Site Supervisor for Super King Air 350 fixed wing and three Bell-412EP Helicopters. Provided oversight of operations to insure compliance and safety. Duties include but not limited to: Flight Engineer, when required, for both model of aircraft. Scheduled and unscheduled maintenance on all aircraft systems; turbine engine, prop/rotor, airframe, flight control, landing gear, engine rigging, troubleshooting systems, daily/turnaround inspections, performed corrosion inspections and related treatment, washing/cleaning, servicing aircraft (fuel, oil, hydraulic, oxygen, nitrogen) systems, structural repairs and component in-house repair/back shop programs. Maintained aircraft to FAA and DEA standards. Position required DoD Secret security clearance.

Sr. AMT/LAE-A&P and Quality Assurance Manager Kirkuk, Iraq flight training program. Supported OH-50A&C (Bell 206) and Bell 206L-4 JetRanger III helicopters. Additional responsibilities included but not limited to: MTF Flight Engineer, Weight & Balance Authority, AOAP program, PMEL coordinator, Site Safety Officer and Assistant site manager. Maintained aircraft to FAA and DoD standards. Position required DoD Secret security clearance.

Sr. AMT/LAE-A&P and SAR rescue hoist operator and flight engineer for Bell-412EP and AW-139 helicopters. Maintained aircraft to FAA and EHI standards. Performed periodic inspections, maintenance, repair, and testing of all aircraft systems, ground support equipment and systems test equipment. Conducted on-the-job training of junior personnel, instructing them in approved procedures and proper handling of tools and equipment, stressing safe work practices and good housekeeping. Performed maintenance at outlying locations as stand-alone A&P/ IA AMT.

Sr. AMT/LAE-A&P and Quality Control Technical Inspector for US Government Reset Program: refurbishment of aircraft upon return from deployment. Model of aircraft: UH-60A&L Blackhawk, Sikorsky. Maintained aircraft to DoD US Army standards.

Sr. AMT/LAE-A&P and Lead Mechanic for US Government Reset Program: refurbishment of aircraft upon return from deployment. Model of aircraft: UH-60A&L Blackhawk, Sikorsky. Maintained aircraft to DoD US Army standards.

Country, Quality Assurance and Maintenance Manager as well as Contract Oversight for Department of Defense in Afghanistan: Model aircraft: Russian Mi-8MTV1 (Mi-17). Oversight for Quality Assurance and Maintenance compliance of leased aircraft; both rotory & fixed wing. Insured the contractual compliance of all projects assigned. This includes but not limited to training of Afghan Border Police & National Interdiction Agents; Construction and maintaining of training and operational facilities; Collection and processing of required information; Management of DoD Counter Narcotics assets. Maintained aircraft to DoD standards. Position required DoD Secret security clearance.

Sr. AMT/LAE-A&P and Lead Quality Control Technical Inspector (AVUM & AVIM), Work Site Safety Officer, Weight & Balance Technician, Calibration Coordinator. Airwing Fleet Inspector orders. Supervisor of 10+ personnel. Aircraft models: UH-60A/L, UH-1H II, UH-1N, UH-1(ST), K-Max, AT-802, OV-10, C-27, and C-208. Maintain maintenance records and publications. Coordinate and Calibrate precision equipment. Responsible for weighing medium and heavy lift aircraft. Maintenance Test (MTF) Flight Engineer and Door Gunner. Maintained aircraft to FAA and DoS Air Wing standards. Position required DoS Secret security clearance.

Sr. AMT/LAE-A&P and Lead Quality Control Technical Inspector (AVUM & AVIM), Work Site Safety Officer, Weight & Balance Technician, Calibration Coordinator, General Aircraft Mechanic and MTF Flight Engineer. Aircraft models: UH-60A&L, OH-58D (Bell 406CS), CH-47D and AH-64. Maintain maintenance records and publications. Coordinate and Calibrate precision equipment. Responsible for weighing medium and heavy lift aircraft. Maintained aircraft to DoD US Army standards. Position required DoD Secret security clearance.

Sr. AMT/LAE-A&P and Lead Quality Control Technical Inspector (AVUM & AVIM), Work Site Safety Officer, Parts Classifier (Depot & AVIM Facility), Weight & Balance Technician, Calibration Coordinator, (DOM) Supervisor of Maintenance at line and heavy maintenance (AVUM & AVIM) levels and General Aircraft Mechanic. Responsible for 75+ aircraft and workforce of 35+ personnel. Aircraft models: UH-60A&L, OH-58D, UH-1H, CH-47 and AH-64. Maintain maintenance records and publications. Coordinate and Calibrate precision equipment. Responsible for weighing medium and heavy lift aircraft. MTF Flight Engineer. Maintained aircraft to DoD US Army standards. Position required DoD Secret security clearance.

Sr. AMT/LAE-A&P and Lead Quality Control Technical Inspector: Supervised: Flight Operations, Production Control, Safety Office and Quality Control (AVUM & AVIM), Supply Support Activity NCOIC, Parts Classifier (AVIM Facility), Weight & Balance Technician, Calibration Coordinator, (DOM) Supervisor of Maintenance at AVUM & AVIM levels, General Aircraft Mechanic, Aerial Observer, Door Gunner, Crew chief and Flight Engineer. Aircraft models: Helicopters - EH-60 / UH-60A&L, OH-50A&C, OH-58D, UH-1H, AH-1, CH-47 and AH-64. Fix wing aircraft: U-21 Beechcraft King Air and C-12 Beechcraft Super King Air. Excelled in maintenance. Progressed to Supervisor/DOM (Platoon Sergeant). Maintain maintenance records and publications. Coordinate and Calibrate precision equipment. Inspected and Maintained Aviation Life Support Equipment. Maintained aircraft to DoD US Army standards. Position required DoD Secret security clearance.Military Duty Assignments:United States Army (Active Duty), Germany Feb 84 – Nov 91 Mechanic, Door gunner, Flight Engineer and Crew Chief, QC TI and PC Supervisor, United States Army (Active Duty), Ft. Hood, TX Oct 83 – Feb 84 Supervisor and Phase Team Leader, Door Gunner and MTF Flight Engineer United States Army (Active Duty), Ft. Lewis, WA Feb 80 – Oct 83 General Aircraft Mechanic, Aerial Observer, Door gunner and Crew chiefUnited States Army (Active Duty), Ft. Eustis, VA Sep 79 – Oct 79 AIT (Advanced Individual Training) Aircraft Maintenance MechanicUnited States Army (Active Duty), Ft. McClullen, AL Jul 79 – Sep 79 Basic Training