AeroLeads people directory · profile
Greg Nelson Email & Phone Number
Doctoral Candidate
at
University of Alberta
1 work email found
@ualberta.ca
2 phones found area 780
LinkedIn matched
✓ Verified July 2026
4 data sources
Profile completeness 100%
Who is Greg Nelson? Overview
A concise factual answer block for searchers comparing this professional profile.
Quick answer
Greg Nelson is listed as Doctoral Candidate at University of Alberta, based in Edmonton, Alberta, Canada. AeroLeads shows a work email signal at ualberta.ca, phone signal with area code 780, and a matched LinkedIn profile for Greg Nelson.
Greg Nelson previously worked as Materials Engineer in Training at Irisndt and Graduate Student at University Of Alberta. Greg Nelson holds Doctor Of Philosophy - Phd, Materials Engineering from University Of Alberta.
Company email context
Email format at University of Alberta
This section adds company-level context without repeating Greg Nelson's masked contact details.
gnelson@ualberta.ca
76% confidence
AeroLeads found 1 current-domain work email signal for Greg Nelson. Compare company email patterns before reaching out.
Profile bio
About Greg Nelson
I am a doctoral candidate for a PhD in Materials Engineering at the University of Alberta. I am a registered professional engineer with APEGA and I hold a Masters of Science. In 2019, I won the Tri-agency Vanier Canada Graduate Scholarship (CGS) and I was offered the NSERC CGS.My research interests are Fracture of Materials, Metallurgy, Steel, Pipeline Integrity, Corrosion, Micro-mechanics, and Environmentally-Assisted Cracking.My thesis will increase the current understanding of near-neutral pH stress corrosion cracking and develop remediation strategies for application in industry. The main application is the pipeline integrity of oil and gas lines which is also beneficial for any buried steel pipeline. My research considers the impact of corrosion, stress corrosion cracking, hydrogen induced cracking, and classic fatigue. I worked in the industry for several years prior to my PhD. My industrial experience is in mainly Pipeline Integrity. I have spent over two years working on Pipeline Integrity including developing IRISNDT's in-house ILI verification. I worked on asset integrity management, performed metallurgical failure analysis, performed miscellaneous duties such as in-situ metallography, and materials characterization. I am an active volunteer in my local and professional community. I volunteer with local charities and community groups through my local church. I am a former chair of ASM international Edmonton Chapter and I continue to serve on the executive committee.
Listed skills include Scanning Electron Microscopy, Optical Microscopy, Materials Science, Characterization, and 13 others.
Current workplace
Greg Nelson's current company
Company context helps verify the profile and gives searchers a useful next step.
6 roles
Greg Nelson work experience
A career timeline built from the work history available for this profile.
Doctoral Candidate
CurrentEstimated Completion End of Year.Supervisor: Dr. Weixing Chen-Won the Vanier CGS Scholarship valued at $150,000 over 3 years in 2019.Thesis Project: Near-Neutral pH Stress Corrosion Cracking of Pipeline Steels.-Investigate the underlying mechanism of NNpH SCC and establish whether it is hydrogen-enhanced corrosion fatigue.-Develop predictive relationships to estimate model fitting parameters for environments and steels beyond those explicitly tested. -Investigate the… Show more Estimated Completion End of Year.Supervisor: Dr. Weixing Chen-Won the Vanier CGS Scholarship valued at $150,000 over 3 years in 2019.Thesis Project: Near-Neutral pH Stress Corrosion Cracking of Pipeline Steels.-Investigate the underlying mechanism of NNpH SCC and establish whether it is hydrogen-enhanced corrosion fatigue.-Develop predictive relationships to estimate model fitting parameters for environments and steels beyond those explicitly tested. -Investigate the role of surface energy, plane stress/strain (crack-tip constraint), temperature, microstructure, and mechanical strength on Near-Neutral pH SCC.-Develop relationships useful for industryMain research Interests are in Metallurgy, Steel, Pipeline Integrity, Corrosion, Micro-mechanics, and Fracture.Current or Past Side Projects: - Supervised an undergraduate researcher for a Corrosion Inhibitor Development Project for downhole conditions (NSERC Engage Grant) - Summer 2018- Designed and built a flow loop to simulate downhole corrosion conditions to complete a NSERC Engage project - Sept to Nov 2018.- Part-time outside consulting on mechanical testing including ASTM E399 and fracture mechanics testing, failure analysis, and corrosion.Additional Duties: Winter 2018/2019/2020/2021: Teaching Assistant and Grader for Mat E 351: Mechanical Properties of Materials. Show less
Jan 2018 - Present
Materials Engineer In Training
Planned, managed, directed, and made recommendations on failure analyses for various components, including pressure equipment, bolting, boiler tubes, drilling tools, downhole components, plant piping, and pipelines. Analyses have included materials such as carbon steel, low alloy steel, stainless steel (martensitic, austenitic, precipitation hardened), specialty downhole alloys (Fe-Cr-Mn-N austenitic stainless steels), titanium alloys, and polymers.Expertise in Asset and Pipeline… Show more Planned, managed, directed, and made recommendations on failure analyses for various components, including pressure equipment, bolting, boiler tubes, drilling tools, downhole components, plant piping, and pipelines. Analyses have included materials such as carbon steel, low alloy steel, stainless steel (martensitic, austenitic, precipitation hardened), specialty downhole alloys (Fe-Cr-Mn-N austenitic stainless steels), titanium alloys, and polymers.Expertise in Asset and Pipeline Integrity Management. Projects have included: - Reviewed and assessed ILI data to recommend dig sites and repairs for a Major Client- Managed, directed, and assessed the inspection results of ILI verification cutouts. Results were correlated with ILI data and reported for a Major Client.- Engineering assessments of routine and non-routine pipeline reactivations for various clients.- Systematic and qualitative engineering risk assessment of various pipeline fields for a Major Client. - Document review and technical editing for a Major Client. - Managed and facilitated the integrity portion of the National Energy Board (NEB) Performance Measures submission for a Major Client. - Facilitated, reported, and made recommendations on a fitness for service assessment on a Station Piping line segment prior to re-activation for a Major Client.Other duties include: In-situ Metallography Interpretation, Project Management, and Materials Characterization (including SEM, EDX, XRD, FTIR). Facilitated Non-destructive Testing and Destructive Testing. Show less
Nov 2013 - Jun 2017
Graduate Student
Supervisor: Dr. John Nychka and Dr. Andre McDonald.Thesis: Developed ‘Changing Landscape Coatings’ for Bioactive Bone Fixation Implants via Flame Spray Deposition. Project is based on the development of a thermally sprayed titanium based MMC coating for biomedical use. Work includes the effects of deposition parameters and feedstock particle size on the porosity, mechanical properties, structure, and phases on such a MMC.Designed, planned, performed, analyzed, and published… Show more Supervisor: Dr. John Nychka and Dr. Andre McDonald.Thesis: Developed ‘Changing Landscape Coatings’ for Bioactive Bone Fixation Implants via Flame Spray Deposition. Project is based on the development of a thermally sprayed titanium based MMC coating for biomedical use. Work includes the effects of deposition parameters and feedstock particle size on the porosity, mechanical properties, structure, and phases on such a MMC.Designed, planned, performed, analyzed, and published experimental results produced utilizing a wide variety of materials characterization techniques including: metallography, XRD, OM, SEM, MS, and FTIR. Designed fixtures and developed an experimental protocol for tensile adhesion testing of thermally sprayed coatings according to ASTM Standard C633Thesis and undergraduate research has resulted in 3 journal publications, 1 conference proceeding paper, 5 oral presentations, and 2 poster presentations. Teaching assistant for the laboratory section of the introductory materials science and engineering course as well as the senior materials engineering design course. Contributed to the reinvention of the senior materials engineering design course. Developed and instructed design-focused curriculum including a case study on NACE Standard MR0175. Several lectures on design with thin films, coatings, and elastomeric materials. Conducted formal design reviews of projects. Show less
Sep 2011 - Aug 2013
Research Assistant
Research Assistant under Dr. Qingxia Liu. Project: The Effect of Attrition Milling on the Carbonation of Serpentinized Dunite
May 2011 - Aug 2011
Undergraduate Research Assistant
Research was funded through the Faculty of Engineering's Deans Research Award Program and the NSERC Undergraduate Student Research Award Program. Supervised by: Dr. John Nychka and Dr. Andre McDonaldProject: Development of Flame-Sprayed Bio-active Glass/Titanium Alloy Composite Coatings.
Sep 2009 - Aug 2011
3 education records
Greg Nelson education
Doctor Of Philosophy - Phd, Materials Engineering
Master'S Degree, Materials Engineering
B.Sc, Materials Engineering
University Of Alberta
FAQ
Frequently asked questions about Greg Nelson
Quick answers generated from the profile data available on this page.
What company does Greg Nelson work for?
Greg Nelson works for University of Alberta.
What is Greg Nelson's role at University of Alberta?
Greg Nelson is listed as Doctoral Candidate at University of Alberta.
What is Greg Nelson's email address?
AeroLeads has found 1 work email signal at @ualberta.ca for Greg Nelson at University of Alberta.
What is Greg Nelson's phone number?
AeroLeads has found 2 phone signal(s) with area code 780 for Greg Nelson at University of Alberta.
Where is Greg Nelson based?
Greg Nelson is based in Edmonton, Alberta, Canada while working with University of Alberta.
What companies has Greg Nelson worked for?
Greg Nelson has worked for University Of Alberta and Irisndt.
How can I contact Greg Nelson?
You can use AeroLeads to view verified contact signals for Greg Nelson at University of Alberta, including work email, phone, and LinkedIn data when available.
What schools did Greg Nelson attend?
Greg Nelson holds Doctor Of Philosophy - Phd, Materials Engineering from University Of Alberta.
What skills is Greg Nelson known for?
Greg Nelson is listed with skills including Scanning Electron Microscopy, Optical Microscopy, Materials Science, Characterization, Ftir, X Ray Diffraction Analysis, Experimentation, and Metallurgy.
Find 750M verified contacts
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trialPeople with similar names
Check these profiles if this is not the Greg Nelson you were looking for.
View similar profiles
