Gregory Caccioppoli P.E. Email & Phone Number

New York, United States

*Very active in New York, Westchester, Rockland and Putnam County NY*- Soil Testing analysis (Deep and Percolation tests, Soil Bearing Pressure Test)- Design and inspection of stormwater management and stormwater pollution prevention plans all in accordance with (when applicable, depending on the project location and area of disturbance) FEMA, NYS and local wetland regulations, Westchester County Stormwater Management Practices Manual, Extreme precipitation tables from the NRCC, Local municipal regulations, NYSDEC regulations, NYSDEP regulations, and even NYCDEP when a project is located in a NYC watershed East or West of the Hudson River.- Analysis of steep slopes on a plot of land according to the local municipal regulation.- Analysis of the zoning requirements and completion of zoning tables.- Realty Subdivisions- Water Main and Sewer Main Designs - Septic Designs - Residential & Commercial Stormwater and Erosion Control Plans- Grading and Site Design - Retaining Wall Design- Residential and Commercial Structural Design and Analysis- Analyze and design solutions for watershed issues by performing stormwater runoff calculations, detention system calculations, percolation system calculations, water quality calculations, flood plain analysis.- Design and inspection of roadways and roadway utilities.- Design and inspection of demolition plans according to local municipal code.- Design and inspection of residential and commercial structures, additions, decks, roof slabs, deck slabs, simply supported beams, municipal drainage systems, parking lots, and more. - Develop wetland/watercourse remediation plans based on local code and planning board requirements.- Design and inspect concrete, stone and mesa block retaining walls.- Prepare Planning Board, Zoning Board, Architectural Review Board, Historical Boards, and any other board associated with each individual governmental agency.

New York, United States

- General Contracting, Project/Construction Management, Site Development and Planning for Government, Residential and Commercial Contracts. - Site Work / Land Grading, All Utility installation, Construction of Retaining Walls, Construction of Foundations, Septic System Design Build and More! - Soil Testing Services (Deep and Percolation Testing & Soil Bearing Pressure Testing)

Hartsdale, New York, United States

** In Addition to All Services I Currently Provide with my Company **- Perform environmental assessments and detail the existing environmental conditions and the environmental impacts of any given project and prove through my analysis that there is no net increase in runoff volumes and velocities from pre to post construction.- Design and inspect septic systems and wells and obtain Westchester County Health Dept Approvals.- Develop plans and reports on material staging and construction sequence for large projects, such as projects requiring a large amount of fill.- Write narratives and reports for SWPPP's, complete NOI's, including water quality analysis and calculations, and submit to the NYSDEC for approvals. I would then be required to inspect the sites throughout the project to be sure all erosion control measures were in place and functioning as the design intended.- Design and inspect foundations for homes.- Design and analyze pumping systems and sized pumping systems according to the specific need of a project.- Analyze the structural condition of various infrastructure such as walls, roadways, drainage runs and foundations, and produce a report with my findings.- Attend Planning Board and Zoning Board Meetings and address all board and community concerns regarding my project.- Design subdivisions, lot merges, and additional survey work pertaining to land use and site development.- Attend Planning Board and Zoning Board Meetings to obtain site plan approval for proposed construction and area variances.- Performed survey work in the field to gather the necessary data to produce surveys.- Input information from the data collector into CAD to create as built/existing condition surveys.

Scarsdale, New York, United States

- Managed and monitored the capital budget for various contracts such as the Village’s annual Paving, Curbing Install and Reset, Roadway Patches, Sanitary Sewer Cleaning and Televising, and Sanitary Sewer Cured in Place Lining, to be sure, we utilized the given budget most efficiently.- Developed a list of problematic drainage runs and assessed the condition of all Village roadways and curbing, to determine which areas needed to be milled and paved, overlayed, patched, full depth paving, and whether new curbing needed to be installed or just reset. I then developed a bid package including standards and specifications, and the schedule/order in which the work was to be completed based.- Supervised and inspected the Village’s Paving, Curbing Install and Reset, Roadway Patches, Sanitary Sewer Cleaning and Televising, and Sanitary Sewer Cured in Place Lining contracts.- Assisted in planning, and design of capital improvement projects. Gather prices, negotiate, run public works crews, scheduled contractors and inspected various Village projects.- Inspected all village drainage outlets to be sure there was no contamination, then drafted the preliminary Sanitary Sewer Evaluation Study for NYCDEP’s Municipal Separate Storm Sewer System (MS4)- Performed detailed reviews, issued comments, and approved Storm Water and Erosion Control (SWEC) Design Submittals to the Village which required a complete understanding of the Westchester County Stormwater Best Management Practices, Village Code, NYSDEC Standards and Practices, State and Local Wetland Regulated Regions, as well as FEMA Guidelines and Requirements.- Performed all stormwater, erosion control and grading inspections following review and approval.- Reviewed in detail, issued comments, and approved Storm Water Plans- Issue Village Street Opening Permits, Tree Permits, Parking Permits, and Con Edison Permits, in addition to the SWEC permits.- Represented Village Engineer in Planning Board Meetings

Yonkers, New York, United States

- Create weekly schedules and supervised crews performing roadway, bridge, maintenance and protection of traffic control and utility construction operations. Work included planning and executing lane/roadway closures, concrete pours (bridge abutments), NEXT‐T Beam installations, rebar installations and utility installations (water mains, drainage, gas, etc.) and more. - Review and adjust any measurements or orders that needed to be altered due to a variance in field conditions, from what was originally designed (change orders).- Design, review, and approve shop drawings for various aspects of the project to be used for construction.- Worked with the NYSDOT inspectors and performed inspections of the construction on completion to be sure work was done according to the specifications and within the required tolerances, and completed work was being accounted for and paid per contract.- Ordered, organized, and inspected deliveries of material that came to the site to be sure it matched the signed purchase order.- Designed water main geometry drawings per NYCDEP specifications and standards, obtained approval on the drawings, and installed the watermain on the Queens Boulevard Over Van Wyck Expressway Bridge.- Negotiated buyouts with subcontractors and suppliers involved in the project to cut costs.- Developed a plan to install a Truss Pedestrian Bridge over the Van Wyck Expressway with limited space, state restrictions on times we can work and the high volume of traffic on the expressway.- Worked closely with NYSDOT and other superintendents to ensure Maintenance and Protection of Traffic and safety.- Coordinated and executed all drainage and conduit installation below grade and on the superstructures including locating all underground utilities via GPR and 811 Dig.- Reviewed drawings and developed Request For Information Submittals (RFI’s) to the NYSDOT as needed throughout the project.

Yonkers, New York, United States

- Perform analyses and quantify various aspects of infrastructure projects being put out for bid by state agencies such as retaining walls, drainage and sewer piping, manholes and catch basins, asphalt roadway, sidewalks, precast and cast in place concrete, rebar, excavation, traffic control, safety and much more.- Required to understand, reference, and apply the codes, specifications, and standard details, specific to the lead agency on the project, and apply them to each item of the project I was assigned.- Responsible for developing a contact list for each project and contacting various suppliers and subcontractors for pricing on the various aspects of the plans I reviewed and provide vendor with any pertinent project specific requirements outlined in the specification booklet, addendums, or provided on the plans in the form of a note(s).- Execute buyouts with the subcontractors and suppliers after we win a project in order to maximize profits on projects.- Create takeoff and cost analysis spreadsheets to quantify the items by item number and incorporate future material and labor escalations, to accurately compare our cost to subcontractor and supplier costs in a detailed itemized breakdown.- Utilized an earthwork program called Agtek to calculate cut and fill quantities.- Analyzed and designed various project components on design build projects where information was lacking. The design work included support of excavation systems, retaining walls, temporary drainage, roadway design and more.- Analyzed/detailed rebar tables against drawings and made sure the tables matched the drawings provided by each agency.- Developed a list of RFI’s which would be sent to the agency in charge who would issue a written response to the questions along with an addendum for the plans and/or specifications to help bidders produce accurate analyses.- Reviewed all proposals and contracts from subs and suppliers being sue they included the entire scope needed.

Bachelor Of Science - Bs, Civil Engineering

Bachelor Of Science - Bs, Civil Engineering