AeroLeads people directory · profile

Gregory Roche Email & Phone Number

Structural Engineer at Fluor Corporation
Location: Greenville, South Carolina, United States 10 work roles 3 schools
1 work email found @fluor.com 1 phone found area 864 LinkedIn matched
✓ Verified August 2026 4 data sources Profile completeness 100%

Contact Signals · 1 work email · 1 phone

Work email g****@fluor.com
Direct phone (864) ***-****
LinkedIn Profile matched
3 free lookups remaining · No credit card
Current company
Fluor Corporation
Role
Structural Engineer
Location
Greenville, South Carolina, United States

Who is Gregory Roche? Overview

A concise factual answer block for searchers comparing this professional profile.

Quick answer

Gregory Roche is listed as Structural Engineer at Fluor Corporation, based in Greenville, South Carolina, United States. AeroLeads shows a work email signal at fluor.com, phone signal with area code 864, and a matched LinkedIn profile for Gregory Roche.

Gregory Roche previously worked as Structural Engineer at Enercon Services, Inc. and Structural Engineer at Jacobs. Gregory Roche holds Master Of Science (M.S.), Structural Engineering from Clemson University.

Company email context

Email format at Fluor Corporation

This section adds company-level context without repeating Gregory Roche's masked contact details.

{first}.{last}@fluor.com
86% confidence

AeroLeads found 1 current-domain work email signal for Gregory Roche. Compare company email patterns before reaching out.

View email format View company profile Management contacts
Profile bio

About Gregory Roche

A summary of myself begins at Clemson University where I earned by B.S. degree in civil engineering with an emphasis in structures. After graduation I joined the SCDOT where I spent time as a bridge inspector helping to support decision-makers charged with maintaining the state's aging infrastructure. I helped to document the degradation of roughly 1000 bridge structures throughout 8 counties in upstate SC with visual and physical inspection. Afterwards I chose to re-enroll at Clemson University where I spent four semesters as a graduate assistant under Dr. Atamturktur (currently at Penn St.), two of which were spent as a fully-funded GAANN Fellow. After securing my M.S. degree in structural engineering during which I served as a teaching assistant for 2 separate courses, I spent time publishing research on the application of Info-Gap decision theory to numerical model selection which was aimed at supporting decisions under severe uncertainty. Since graduate school, I have worked as a practicing structural engineer spending approximately 5 years with two top-ranked private firms: CB&I and Jacobs. This experience has sharpened my design skills and given me invaluable exposure to both large and small engineering projects. During this period, I've spent much time on site interfacing with clients as a representative of my employers. Additionally, I've also worked in an office environment developing models, performing routine FEL/RFI work and assembling typical structural engineering calculation packages based on applicable codes like ASCE 7, ACI 318 and AISC 360 (among many others). Throughout my career I’ve continued to grow my responsibilities and adapted to the challenges of each new environment. I’ve now worked in multiple roles supporting the government and military as well as in the private-sector. I've written code and published academic papers. I've performed on-site inspection work and delivered detailed reports to my clients. I've developed sophisticated numerical models and assembled numerous structural calculation packages. And in nearly every role I've worked to mentor junior level employees and pass on what I've learned to increase their abilities and efficiency.

Listed skills include Microsoft Office, Autocad, Concrete, Civil Engineering, and 23 others.

Current workplace

Gregory Roche's current company

Company context helps verify the profile and gives searchers a useful next step.

Fluor Corporation
Fluor Corporation
Structural Engineer
AeroLeads page
Company profile
View company profile Email format
10 roles

Gregory Roche work experience

A career timeline built from the work history available for this profile.

Structural Engineer

Current
Fluor Corporation

Irving, Texas, Us

Projects:Eli Lilly Pharmaceutical Production Facility (Lebanon, IN)Vistra Power Plant Expansion (Odessa, TX)MP Materials Production Facility (Dallas, TX)Takeda Pharmaceutical Production Facility (Osaka, JP)Barton Malow / Michigan Potash (Hersey Township, MI)Ajinomoto P3 Expansion (Raleigh, NC)ASR Sugar Warehouse (Baltimore, MA)Drax Biomass Pilot Plant (Bastrop, LA)Seagen Pharmaceutical Manufacturing Center (Everett, WA)Seqirus Manufacturing Facility (Australia)Roche Molecular Systems PCR Manufacturing Facility (Branchburg, NJ)

Nov 2020 - Present

Structural Engineer

Enercon Services, Inc.

Kennesaw, Georgia, Us

• Provided structural engineering expertise for NextEra & Southern Energy clients• Submitted design packages for Hatch, Vogtle, Turkey Point & St. Lucie plants• Organized pre-job planning & inspection with team at Turkey Point plant (Homestead, FL)• Reviewed calcs and other deliverables assembled by entry-level engineering staff• Handled design and seismic qualification of equipment supports

Jun 2020 - Nov 2020

Structural Engineer

Jacobs

Dallas, Tx, Us

Large Projects - Structural Engineer GENERAL DYNAMICS SUBMARINE ASSEMBLY FACILITY (GROTON, CT) • Designed multi-story mezzanine floor framing in RAM Structural System • Compiled ACI-318 design calcs for various slabs, deep beams, pile-caps, etc. • Worked with designers to develop Revit model & dwgs • Designed (high-seismic) anchorage of bldg. columns utilizing Hilti PROFISNSBS STEEL MILL EXPANSION (Main Bldg) (TOLEDO, OH) • Sized hundreds of joists acting as girts and purlins for ASCE 7-10 Wind / Snow loading • Designed multiple, independent 100-ft steel stair towers using STAAD.Pro • Interfaced with and guided India-based design team developing REVIT model & dwgs • Developed large roof-based moment frames for 20-ft dia exhaust ducts • Performed steel take-offs and organized extensive mill order of large steel sections • Back-checked hundreds of shop drawings and responded to RFIs as neededMulti-Project Group - Structural Engineer • Contributed to dozens of small/mid-sized projects for clients in pulp & paper industry • Conducted site visits, estimates, condition assessment reports and other FEL work • Eng. support as needed including: steel design, dynamic analysis, deep and shallow foundations, slabs, pile caps, sheet piling, minor connection work, baseplates, anchorage, etc.

Nov 2016 - Jun 2020

Structural Engineer

Cb&I

Houston, Texas, Us

• Hired by CB&I and sent to Naval Submarine Base King’s Bay to support NAVFAC & Trident Refit Facility crane engineering personnel (CONFIDENTIAL CLEARANCE Req’d) • Formulated engineering work packages covering the maintenance, repair and upgrading of dozens of large portal cranes on waterfront and numerous bridge cranes in dry-dock & machine shop areas. • Attended regular client meetings as company representative and coordinated on-going engineering work with head Navy/TRF engineer. • Provided technical support and direction for CB&I work crew leads on base.

Apr 2015 - Nov 2016

Gaann Graduate Research Fellow

Clemson University

Clemson, Sc, Us

Studied predictive capability of numerical models considering robustness to non-probabilistic uncertainty

Jan 2014 - Dec 2014

Graduate Teaching Assistant

Clemson University

Clemson, Sc, Us

Advised by Dr. Sez Atamturktur as M.S. Student• Composed extensive paper detailing prognostic methods in historic masonry monuments• Comprehensively reviewed literature on structural health monitoring & damage prognosis• Researched case studies involving historic masonry towers, churches & cathedrals• Assisted other students in revising technical papers and research proposals • Coordinated Masonry Design Competition involving Structural & Architecture Students• Designed Procedures and Steel Frame Apparatus for Flexural Testing of Masonry Walls• Resourced Manufacturing & Industry Providers for Material Supplies• Compiled Reports for The Masonry Society and the National Concrete Masonry Association

Jan 2013 - Dec 2013

Graduate Intern

Sandia National Laboratories

Albuquerque, Nm, Us

Worked with SNL Group 01544: Verification, Validation, and Uncertainty QuantificationDirection application of robustness analysis procedure to DoE constituent material modelCoded Matlab-based optimization algorithm for UQ and robustness analysis of FE modelsUsed Design Optimization Toolkit, Sierra SD & Dakota Software for calibration, optimization and FEACompiled presentations and completed paper for IMAC modal analysis conference

Jun 2014 - Aug 2014

Mathematics Tutor

Tri-County Technical College

Pendleton, South Carolina, Us

Tutored college students in Algebra, Trigonometry, Geometry, Calculus, Physics, Probability and Statistics, Chemistry, and Engineering Skills.

Aug 2013 - Dec 2013

Bridge Inspector

South Carolina Department Of Transportation

Columbia, Sc, Us

Associate Geodetic Technician - Bridge Inspector (NHI Certified)• Visually & Physically Inspected Bridge and Culvert Structures throughout SCDOT District 2• Identified & Recorded Damage in Various Reinforced Concrete, Steel & Timber Structures• Updated Bridge Inspection Reports, NBI/Pontis Information & HMMS Records

Jul 2011 - Jul 2012

Private Music Instructor

The Guitar Cabin
Aug 2001 - Aug 2008
3 education records

Gregory Roche education

Master Of Science (M.S.), Structural Engineering

Clemson University

Bachelor Of Science (B.S.), Civil Engineering

Clemson University

Education record

Clemson University
FAQ

Frequently asked questions about Gregory Roche

Quick answers generated from the profile data available on this page.

What company does Gregory Roche work for?

Gregory Roche works for Fluor Corporation.

What is Gregory Roche's role at Fluor Corporation?

Gregory Roche is listed as Structural Engineer at Fluor Corporation.

What is Gregory Roche's email address?

AeroLeads has found 1 work email signal at @fluor.com for Gregory Roche at Fluor Corporation.

What is Gregory Roche's phone number?

AeroLeads has found 1 phone signal(s) with area code 864 for Gregory Roche at Fluor Corporation.

Where is Gregory Roche based?

Gregory Roche is based in Greenville, South Carolina, United States while working with Fluor Corporation.

What companies has Gregory Roche worked for?

Gregory Roche has worked for Fluor Corporation, Enercon Services, Inc., Jacobs, Cb&I, and Clemson University.

How can I contact Gregory Roche?

You can use AeroLeads to view verified contact signals for Gregory Roche at Fluor Corporation, including work email, phone, and LinkedIn data when available.

What schools did Gregory Roche attend?

Gregory Roche holds Master Of Science (M.S.), Structural Engineering from Clemson University.

What skills is Gregory Roche known for?

Gregory Roche is listed with skills including Microsoft Office, Autocad, Concrete, Civil Engineering, Microsoft Word, Engineering, Powerpoint, and Microsoft Excel.

Find 750M verified contacts

Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.