Gregory Scopel Email & Phone Number

Chapel Hill, NC, US

Raleigh, NC, US

• Manage startup medical device company’s test engineering lab for preclinical trial product, known as an Intravascular Ventricular Assist System (iVAS) with its implantable IABP (Intra-Aortic Balloon Pump).
• iVAS product Subject Matter Expertise (SME). I work additional hours to make myself available to mentor and train all staff in the critical preclinical product testing, design, manufacturing, and development phase.
• Responsible for general-purpose test equipment, NI-DAQ systems, and product testing systems (test beds) for prototype and production equivalent levels, used in ad-hoc, dry-run, and formal testing, as well as.
• Lead multiple (local) cross-functional teams on the iVAS product by working with Mechanical, Electrical, Manufacturing, and R&D groups by providing feedback and suggesting design changes to each group.
• Verify design changes by determining what and how to perform necessary functional test(s); develop the testing fixture(s), along with testing software (NI-LabVIEW) application to control device under test (DUT) as well.
• Update senior management on all aspects of the iVAS hardware design and software status.

Raleigh, NC, US

Sinowest MFG designs, manufactures, and sells innovative hardware and software solutions for the petroleum industry. Showcase product is the DEEPBLU 10 Diesel Exhaust Fluid (DEF) Dispenser, a new state-of-the-art dispenser designed to meet the emission needs of diesel engines manufactured after the 2010 EPA Emission Standards regulations. In addition, our.

My interactive electronic toy obtained "Patent Pending" status. Continuing with its development.

Neenah, WI, US

* Reviewed, modified, and executed (dry-ran) electrical and mechanical verification procedures to ensure the testing and the procedural document met and/or exceeded customer’s requirements for their medical device product

* Manually performed verification and validation (V&V) on AC and DC motors; for both military and commercial aerospace vehicles. V&V testing methodologies adhered to MIL specifications and FAA guidelines. Acquired parametric data included the following: motor torque (peak, breakaway, and sensitivity), motor constant, and no load speed

Rueil Malmaison, Paris, FR

* Develop and manage verification test strategies and test plan activities associated with wired and wireless communications monitoring products of energy usage for both business and residential customers.

* Worked on two short-term projects at LORD. First project was to develop an automated test routine, using NI LabVIEW programming language, which communicated with device under test (DUT) via CAN network. In addition, the test routine logged the DUT status and measurement data to TDMS file structure. In the second project, authored validation protocol for.

* Performed manual and automated system software and hardware testing of proprietary technology platform based on Nuclear Magnetic Resonance (NMR) technology.* Performed exploratory (unscripted) ad hoc and directed testing.* Executed validation test protocols, including system validation protocols and software validation protocols. All verification and.

Franklin Lakes, New Jersey, US

* Planned and executed verification, validation (V&V) and testing activities for molecular diagnostic computer-assisted CCD imaging products for various cancers, including cervical, breast, ovarian and prostate. V&V efforts specific to FDA QSR 820.30 Design Controls for Medical Devices and ISO 13485 for the design and manufacture of medical devices.*.

* Researched solar cell technology by applying semiconductor theory.* Designed and ran experiments to ensure aspects of solar (photovoltaic) cell design were feasible.* Developed data logging and control system software for environmental chamber testing to ensure solar cell receiver system components met IEC and UL test methodologies.* Wrote reports.

Minato-ku, Tokyo, JP

* Facilitated the execution of Voice Quality (VQ) and User Interface Performance (UIP) system level test cases on mobile phone platforms.* Developed hardware (rack, wiring, and fixturing) and software (LabVIEW program routines) to automate the VQ, UIP, and Perpetual Evaluation of Speech Quality (PESQ) testing systems. Employed a CCD imaging camera and.

* Assisted in the developed of safety critical software for fire detection and suppression systems for the aerospace industry. Specifically responsible for aircraft Line Replaceable Unit (LRU) embedded software verification as well as assisted software and electrical design development teams. Software verification was strictly guided by RTCA/DO-178A.

* Verified and validated in-house charge-coupled device (CCD) imaging research systems and products by editing and writing validation plans and reports as per FDA guidelines.* Wrote and executed software validation testing scripts. Test scripts were executed on automated cancer detection image and data analysis system.* Gained experience with cellular and.

* Accomplished design verification testing of single and three phase UPS at prototype levels.* Validated and qualified UPS to UL & IEC Safety Compliance Test Methods.* Modified prototype boards to next level revision for validation process that included soldering surface mount and through-hole devices.* Validated components to not exceed manufacturers’.

* Developed board and system level tests and testing fixtures, both hardware and controlling software, to improve product throughput. Test fixtures included analog and digital PCB modification and assembly as well as all necessary enclosures, power wiring, communication cabling, and software.* Developed microchip level RS-232 serial communication routines.

* Tested and measured the performance of new product capability and feasibility in research & development laboratory.* Developed new product test and diagnostic systems, including life cycle testing. Wrote LabVIEW program routines to control PC based computer, data acquisition card, and signal-conditioning (DIO) module. Program routines acquired.

* Characterized and measured customer’s light sources by capturing the arc, junction, and filament images using a CCD based goniometric scanner.* Provided customers with ray-tracing data obtained from the scanner, maintained the scanner, and installed updated scanner software.* Managed the source-scanning schedule and the day to day scanner operations.

* Assisted in making paper industry color sensor design improvements.* Set color sensor performance specifications and tested each sensor to ensure it met these specifications.* Wrote and improved test procedures to aid in color sensor product release.* Supported sensor product manufacturing by evaluating, calibrating, and performing diagnostics and.

* Tested and qualified semiconductor photolithography stepper projection lenses in a Class 100 cleanroom.* Tested and qualified the lens projection system for these steppers to ensure product met or exceeded customers‘ specifications by performing alignment and measurement of it’s resolution, depth of focus, distortion, and uniformity.* Inspected.

* Assisted senior engineers and scientists in exploratory research, development, and test programs in global positioning, navigation and geographic information systems.* Assisted in determining requirements and in gathering test data for procurement packages.* Gathered technical data, assisted in the analysis of this data and prepared summary reports.

(summer, winter 1994)* Reviewed and provided comments to remedial investigation/feasibility study reports, retrieved and evaluated data from Army and U.S. Environmental Protection Agency databases, and prepared and updated project management planning documents.* Assisted in the preparation and coordination of environmental restoration procurement packages.

(summer, winter 1993)* Assisted in the 3D-modeling of groundwater contaminants at Army installations using Interactive Volume Modeling software program on the Silicon Graphics workstation.* Assisted project officers with the preparation and distribution of environmental restoration documents and reports.* Reviewed environmental restoration technical.

(summer, winter 1992)* Tracked and reported environmental sample and analytical data to assist project officers with chemical and environmental data entry.* Manipulated data in accordance with instruction to extract information and generated reports.* Extensively used IBM PCs, Novell LAN/WAN and UNIX based minicomputers on a daily basis to assist project.

Randolph AFB, TX, US

* Operated manual and semi-automatic test stations and shop mock-up test equipment to inspect, troubleshoot, isolate, repair, test, align, calibrate, modify, and certify airborne electronic warfare (electronic countermeasures-ECM) and flight navigation line replaceable units (LRUs) for F/FB-111 Aircraft. Units were part of the following systems; flares and.

Bachelor Of Science - Bs, Physics

Electrical And Computer Engineering Graduate Program

Computer Programming

Certificate, Avionics, Electronics

Education record