Hammad Mohsin Email & Phone Number

Doha, Qatar

(An EPIC of LGO Tank Project of QATAR PETROLEUM at Mesaied Refinery, Qatar)Key responsibilities are:• Conducting Internal Audit and audit of subcontractors related to this Project.• Preparation of procedures / method statements / ITPs according to Project specifications.• Submission of RFI and clearance of punch list.• Knowledge of Smart plant/project execution drawings.• Solving the Technical Queries and Co-ordination of Technical issues. • Participate in Quality Audits, issue Non-Conformance reports.• (NCR), Corrective Action reports (CAR) and Event report (EVR).• Ensuring strict compliance with the project requirement during construction.• Provide support to Project management on construction, QA/QC matter.• Review the vendor document as per the approved drawing/specification.• Co-ordination with the design department for any design issues.• Review/comment the FAT/SAT procedure from vendor package as per the manufacturing ITP of the material.• Reviewing the Material submittal to ensure that the material is as per approved drawing/specification to avoid any discrepancy/variation during material inspection.• Assign and monitor respective duties of other QA/QC inspector.• Coordinate with construction personnel about on-going inspection issues.• Ensure proper implementation of ISO 9001.• To ensure the AGENDA for the Quality monthly meeting to check the status of document submissions, Audit and NCR status, Surveillance report status, Review of objectives.• Preparation of QA/QC Dossier.• Underground & above ground cable inspection.• Earthing system inspection and testing.• Cable tray installation.• Cable installation inspection and testing.• Insulation resistance & continuity test, loop checking, marking, laying, glanding and termination of cables.• Installation inspection of street/fence lights.• Calibration and configuration check of various Instruments.• Submission of RFI and clearance of punch list.

Faisalabad, Punjab, Pakistan

(CMPak/TPMS & Swap Projects)Key responsibilities are:• Responsible for installation and management of newly rollout sites, M/W Links, BTS (ZTE SDR BS 8700, 8800 and 8900), BSC and SDH equipment.• Handling & monitoring of subcon. Coordination between client and subcon.• Responsible for delivery of quality work from subcon as per contract & customer requirements.• To ensure 100% Final Acceptance of roll out sites for new and expansion projects from Client.• JVs with customer for acceptance and clearing the doubts.• On site snag rectification and acceptance with subcon quality teams.• Design & Implement a Quality Awareness Training program for the subcon teams to meet Client Quality Standards.• Health, Safety & Environment (HSE) Inspections during installation and cutover activities.• Conduct weekly meetings with subcon about Final Acceptance documents and quality improvement.• Developing of weekly progress and spot check reports and reporting to ZTE & Client’s Management.• Preparation of Ready For Acceptance (RFA) documents• Spot check of sites to check the quality work of sites• Performing PAT of sites according to the customer requirement

Lahore, Pakistan

Key responsibilities are:• To develop and implement QHSE audit plan for operational and roll out sites of Mobilink, CMPak & Ufone. • To ensure and finalize acceptance test of roll out sites for new and expansion projects as per BOQ/quotation and OHSAS 18001.• Manage Health, Safety and Environment (HSE) projects portfolio of Mobiseve holding.• Develop, promote and sustain an HSE aware & responsible culture in the company.• Management Representative for internal & external HSE audits.• Developing company-wide culture, carry out company-wide activities to develop a culture of HSE awareness and responsibility amongst employees.• Performance reporting to various stakeholders: Top Management, Line Management HODs, and Mobiserve Holding Group.• People management, manage and motivate team resources (direct & cross-functional) and to grow them in order to make MPL an excellence center for HSE.• Building of Operations Model adopting highly efficient & process oriented Telecom Network operations.• Setting up KPIs/ SLAs/ OLAs for customer operations management and efficient network operations to achieve a high level of quality network and customer satisfaction.• Audit on critical network & operational KPIs and set up the improvement plan setting up low cost ops model with higher profit margin. Setting up parameters for Business management.• Mentoring people to enrich their knowledge and experience.• Responsible for network quality and optimization to achieve KPI goals, service quality analysis and management reporting.• Customer complaints management.• To inspect and validate material (Power & Environment) quality as per customer requirements and BOM. • To ensure civil and mechanical work of site as per plan and customer quality standards.• Responsible for competence development in the team, process compliance, employee retention and spare part management.• Member of technical strategy team meeting short term and long term goals.

Faisalabad, Pakistan

• To Coordination with Mobilink, other departments QC inspectors and construction Engineers to make sure that activity carried out as per sequence and approved plan to avoid rework or delay at job site.• Ensure that QMS implemented as per OHSAS 18001, applicable codes, standards and project specification.• Contact with client for approval of work according to Mobilink checklist.• Maintaining all the testing equipment in good working condition along with valid calibration certificates & all the testing records as per approved procedures by the entire client requirement.• Surveillance of ongoing activities at site on daily basis to make sure that all the activities performed at site based on approved specification, latest drawings & as per approved Project Quality Plan.• Responsible to raise the RFI (Request for Inspection) and arrange the site inspection as per witness with client representatives.• Prepare and maintain Inspection records.• Follow up with site teams to ensure all issues are resolved and liaise with Project Manager for taking preventive and corrective actions.• Ensures timely completion of all works within the specified budget.• Responsible also to ensure maintenance of good quality and safety standard at site.• Preparation of weekly / monthly progress reports.• To identify scope of schedule activities.• To prepare schedule, manpower, and quantity progress and performance reports.• To ensure external alarms patching & reporting to NOC. • To ensure quality (RSL) of MW (NEC) links and BTS.• To validate PM quality through strong follow ups and improving quality index of sites. • To coach Field Operations Engineers and Technicians for HSE policies and new electrical instrument’s operations and calibration.

Sahiwal, Pakistan

Key responsibilities are:• Overhauling of all kind gensets (Perkins, John Deere, Mets, SDMO, Kubota, Mitsubishi etc.)• Arrangement of rental Genset (backup) for overhauling sites. Provide Security clearance from client to install rental and removal Genset for overhauling.• Delivery of overhauling material from warehouse to respective regions.• Reporting related to overhauling process/ progress on daily basis.• Provision the material regarding overhauling to sub con teams and also verification of faulty and repairable items.• Co-ordination with client representative on location, at the time of engine dismantling.• Arrange the teams to visit overhauled gensets and manage report of issues.• Co-ordination with client for HO/TO visit and also Mobiserve regional teams.• Reporting to client for Extra Parts, Co-ordination with Commercial department for Extra parts and their quotation.• Co-ordination and reporting to PMCL for HO/TO acceptance.• Reporting to management related to HO/TO acceptance and rejection.• Reporting and Co-ordination with Procurement and finance for sub con invoice verification.• Responsibility to provide rental Genset in all regions of C-II in case of any emergency.

Sargodha, Pakistan

Key responsibilities are:• Preventive Maintenance of Mobilink cell sites and BSCs.• Corrective maintenance of Mobilink cell sites and BSCs. • Responsible for all external and internal alarms which received from OMC-R and clear alarms within limited time.• End to end connectivity from Trau to BSC and then to BTS site.• Expansion the existing cell sites to adding new radios and Abis.• Installation and fault tracing/troubleshooting of Microwave links.• Co-ordination with operator/vendors/subcontractors for non GSM equipment Aircon, Genset, Rectifiers, Refueling etc. • Manage the team for work according to the standard of my company requirement on daily bases.• Responsible for the all power issues regarding operation sites in my region.• Responsible for the preventive maintenance of Gensets & all electrical components and electrical panels (i.e) GEDP & ATS etc.• Responsible of the over hauling of gensets in my region.• Planning, installation and management of the Power (AC and DC) for the Links, BTS, BSC and SDH equipment.• Installation of Power Cabinets, panels for 3-Phase power supply to the system.• 3-Phase Load sharing, calculation and balancing at the site and also with the co-location sharing partners.• Deals in any abnormality AC (WAPDA, Genset) supply and to rectify the problem at earliest efforts.• Monitoring, troubleshooting and rectification of the alarms regarding power.• Monitoring of the bills, payments and fuel (Genset) arrangement regarding Power supply.• Rectifier’s installation, operation and maintenance at the site for normal DC power supply to equipments installed at the site.• Responsible for dealing with the subcons & also responsible for verifying all their invoicing in my region.• Responsible for to resolve all Wapda related issues too.Key Achievements• Never breached MTTR of assigned site for TT as per SLA with PMCL.• Always kept quality index of my ownership site more than 90% as per internal audit report.

Islamabad

• Prepare BOQ & Quotations of electrical switch gear items for clients• Installation & commissioning of electrical switch gears and instruments (PLC, drives & sensors)• To provide onsite solution and services for under warranty products.

Bachelor Of Science (B.Sc.), Electrical, Electronics And Communications Engineering, A

Diploma Of Associate Engineer, Electrical

Secondary School Certificate, Sciense