-January 2025 to till now-Supporting GSMP team for differential relay fiber healthyness checking and termination of distance protection wiring at PLC, OSN, FOX, SDH and different grids-January 2025- Perform Thermography-EarthingTesting of Wave traps, Battery Bank Maintenance, Battery Load Testing of 48vDC, 395AH Battery Bank, OTDR-Fiber Testing, PLC Panel and SDH Panel Distance Protection Wiring & Alarm Checking at Liaqutabad Grid.

Area of Responsibility Continued….5. People Management (5%)1. Conduct on site safety promotional activities, training and risk assessments of employees.2. Ensure all sectional activities to be performed as per SOP, following the SLA (safety leader award) criteria of HSEQ and comply with all legal Regularities.3. Achieve zero fatal & major accidents and Increase reporting of near-miss incidents.4. Ensure implementation of ISO 9001:2008 standards in section followed by SOPs for proper operations.6. Health, Safety and Environment 5%• Conduct on site safety promotional activities, training and risk assessments of employees. • Ensure all sectional activities to be performed as per SOP, following the SLA (safety leader award) criteria of HSEQ and comply with all legal Regularities.• Achieve zero fatal & major accidents and Increase reporting of near-miss incidents. • Ensure implementation of ISO 9001:2008 standards in section followed by SOPs for proper operations.

Area of Responsibility Continued...3. Installation/Commissioning & Testing of Indoor & Outdoor Equipment's (15%)1. Involvement in newinstallation/commissioning and testing of Telecom systems SDH, PLC, PABX, and Protection as required for data, tele-protection and voice in Transmission Network.2. Perform re-configuration of Telecom system for restoration of services as directed and required by the reporting line due to frequent changes in network.3. Supervision and verification ofInstallation/Dismantling of OPGW and U/G fiber optic cable with clearance as per safety standard. 4. Management of Projects Related issues (15%) 1. Provide on-site assistance to projects handling team for successful implementation of project related activities as per the approved SOPs and standards.2. Self-witness of technical test and activities performed on site as per approved standard. 3. Perform integration and re-programming of new and existing equipment's of Telecom system necessary for augmentation work.4. Supervise OPGW rehabilitation activities, installation of approved hardware and material on site, coordination with vendors and authorities, assure timely completion of job.

Area of Responsibility Continued..2. Fault Rectification and Management (35%)1. Ensure timely rectification of faults. Self- mobilization required in case of Category B and C faults which includes:RTU data channels: Failures occurred in more than 8-10 stationsDistance Relay Protection: Channel outage for more than 4-6 HoursSpeech communications: Voice communication disturbance from desired station to LDC Control, between any two stations, one way calling between two stations and any module issue. 48VDC Systems: Battery charger failure/abnormal behavior2. Perform re-routing of data, voice and tele- protection services to ensure availability of backup channels in case of SDH ring/link failure as instructed by reporting line.3. Assure the replacement of faulty equipment modules/cards/hardware's in SDH/PDH, PLC, PABX, and 48 VDC systems with software re- configurations.4. Manage the transmission Line response testing and fiber optic link testing to evaluate SNR/attenuation to produce the characteristics of medium for reliable and better performance of telecom system.

Area of Responsibilities.1. Site Operation & Maintenance (20%)1. Supervise the Preventive maintenance of indoor and outdoor Telecom system which includes:Indoor Systems (SDH/PDH, PLCs, PABX, 48VDC battery Chargers and 48VDC battery banks)Outdoor Devices (Line trap, CouplingCapacitor and Line matching units)2. Execute the testing to examine the healthiness of tele-protection channels of Line differential relay and distance relay protection for EHT 132KV and 220KV circuits over Power Line Carrier and Fiber Optic communication links with co-ordination of GSP engineers.3. Conduct and perform data channels testing with co-ordination of RTU and SCADAmaintenance team from desired Grid stations up to SCADA server for assurance of Telecom links healthiness with zero-bit errors.4. Manage the team by availing the shutdowns of outdoor coupling devices to ensure equipment healthiness. As per HSEQ minimum of 4 safety walks required by managers to ensure smooth functioning of indoor and outdoor equipment. Testing of critical equipment like 48VDC is mandatory in every 40-45 days.5. Perform different software/firmware uploading and downloading of cards in SDH equipment's for reliable inter-compatibility between SDHs' in ring operation.

Competencies.Overhead Transmission Maintenance_MGR-GM Safety Awareness_MGR-GMPlant Maintenance and Operations_MGR-GM Data Analytics and Reporting_MGR-GM Industry Principles and Concepts_MGR-GM Supply Chain Management_MGR-GM Project Management_MGR-GMGrid Station Earthing_MGR-GMMental Agility MGR-GMEnergy Management_MGR-GMSystems and Substation AutomationSystem MGR-GMGrid and Transmission Network Operations_MGR-GMDrives Results_MGR-GMDrives Change MGR-GMFinancial Acumen_MGR-GMElectrical Maintenance_MGR-GMBuilding High Performance Teams_MGR-GM Cyber Security Fundamentals_MGR-GM Troubleshooting_MGR-GMOracle Database Administration_MGR-GM Telecommunication Networks_MGR-GMTransmission Network Operations_MGR-GMSubstation Protection System_MGR-GM Procurement and Contractual Procedures_MGR-GMSCADA Applications_MGR-GMQuality Control and ContinuousImprovement_MGR-GMSelf Awareness_MGR-GMPower System Protection_MGR-GMPower Stability and Reliability_MGR-GMEnvironment Management Systems_MGR-GMProcess Safety Management_MGR-GMStakeholder Management_MGR-GM

d.Manager Telecom.PurposeThis position ensures the Preventive Maintenance and Corrective Maintenance of Telecom services/equipment's in Transmission Network, Generation, IPPs and up to LDC of assigned Grids/Section; engages in site supervision and execution of the installation, commissioning, testing, operation, optimization and fault rectification of Telecom system, Optical Transmission Network and facilities; attend critical faults & tripping and self-mobilization for category B and C fault (internally known as intermediate faults). Seek opportunities and take steps for continual improvement in processes and engineers, assist in annual goal setting throughout the year. These responsibilities are performed with the objective to facilitate smooth functioning of telecom network as per the defined SOPs, followed by ISO 9001:2008 standards and Regulatory/Statutory framework of Pakistan.EducationEngineering Graduate, B.E (Electronics)KnowledgeHands on experience of SDH/PDH, PLC, PABX and 48 VDC SystemsAdvance Knowledge and experience of OPGW and U/G fiber optic cableInstallation/Dismantling and Outdoor CouplingDevicesKnowledge and experience of Tele protection SchemeAwareness of SOPs /ISO 9001:2008 StandardsExperienceMinimum 7 years of experience

Our employees are our company's greatest asset - they are our real competitive advantage. We possesse immense power of innovation, immagination and a desire to attract and retain the best; provide them with encouragement, stimulus, and make them feel that they are an integral part of the company's mission.PurposeThis position assists, supervises and execution of substation automation system, cyber security and SCADA projects for KE Grids & Transmission. The primary responsibility is to support in day-to-day project execution activities and coordinate GSMP, Telecom, SCADA/RTU maintenance, NC SCADA operation and contractors. Witnesses of FAT, SAT and ensure timely project execution. Compliance of company HSEQ guidelines and policies, international IEC/ANSI/DN standards and regulatory / statutory framework of Pakistan.EducationBE (Electronics or Electrical)

Area of Responsibility ContinuedProject Documentation: (25%)Assist in review of FAT protocol and participate in factory witnessing (FAT) activity.Assist in review of SAT protocol and participate in Site witnessing (SAT) activity.Ensure timely preparation of progress report and keep record of it.Assist in monthly progress presentations.Ensure timely dispatch of design files, as-built drawings and other technical documents to end user.Maintain & handle monthly TBTs records and share with concern HSE coordinator.Project Closure: (15%)Assist in witnessing of the project invoices.Coordinate with user for jointly preparing the punch list for closure of the project.Handle the taking and handing over material and equipment.Review and witness project material reconciliation report.Assist in preparation of lesson learned report Handle with contractor and end user for DLP and warranty issue.KE provides equal employment opportunity (EEO) to all persons regardless of age, color, origin, physical or mental disability, race, religion, creed, gender, marital status, status with regard to public assistance or any other characteristic protected by federal, state or local laws.

CompetenciesOverhead Transmission Maintenance_AM-DMSafety Awareness_AM-DMPower Stability and Reliability_AM-DMPlant Maintenance and Operations_AM-DMData Analytics and Reporting_AM-DMIndustry Principles and Concepts_AM-DMGrid Station Earthing_AM-DMInstrumentation and Control_AM-DMEngineering Drawing_AM-DMMental Agility_AM-DMProject Management_AM-DMGrid and Transmission Network Operations_AM-DMSAP Management_AM-DMDrives Change_AM-DMDrives Results_AM-DMCyber Security Fundamentals_AM-DMSystems and Substation Automation System_AM-DMElectrical Maintenance_AM-DMBuilding High Performance Teams_AM-DMTroubleshooting_AM-DMFinancial Acumen_AM-DMOracle Database Administration_AM-DMSubstation Protection System_AM-DMTelecommunication Networks_AM-DMProject Construction Monitoring_AM-DMQuality Control and Continuous Improvement_AM-DMPower System Protection_AM-DMSelf Awareness_AM-DMStakeholder Management_AM-DMProcess Safety Management_AM-DM

KnowledgeGood Knowledge of Power Utility SAS, Cyber Security and SCADA Systems.Extensive knowledge of Gateways, Servers, Workstations, Firewall, Ethernet Switches, GPS, etc of various Vendors i.e GE, SEL, SIEMENS, ABB.Commissioning & Laying of FO Patch chords, and Ethernet cables. Knowledge of Project Execution. - Skill in MS Excel, Power View, Power BI, MS project, Visio, MS PowerPoint and MS Word.Business & finance Acumen.Knowledge of HSEQ in Power Transmission Network environment.ExperienceBE (Electronics or Electrical) with a minimum of 2 or 3 years of experience in Power Utility Substation Automation, Cyber Security and SCADA System.

Area of ResponsibilitiesProject Tendering Phase: (25%)Assist in preparation of preliminary designs, work scopes and BOQ’s.Assist in developing technical equipment specifications and datasheets.Assist in coordination of pre-bid and post-bid queries and prepare response. Project Execution Phase: (35%)Supervise project sites activities to monitor the day-to-day progress. Participate in weekly progress meetings and identify the project related issues. Assist in reviews of substation automation system and SCADA design.Assist in review of schematic drawings of SAS, cyber security and control/protection.Witness of FAT activities.Witness of SAT activities.Supervise of site activities of SAS and SCADA equipment installation.Gateways, Server, Workstations, Firewall, FO patch Chords, Ethernet Cable, Network Switches, GPS, etc.Supervise of pre-commissioning and commissioning activities.

Areas of Responsibility:1 Project planning and Development - Conduct site survey to collect site data for preliminary scope work, design and BOQs.- Assist in preliminary research for development of specifications of automation equipment and relevant international standards for type tests.- Assist in preparation of project presentation.- Assist in review of pre-bid and post-bid technical evaluation and comparative study of bidders offered equipment 2 Pre- Site Execution Activities - Assist SCADA manager with evaluation of SCADA documents.- Assist RTU and SAS Manager in review of equipment detail, base design, and detail design.- Assist in review of schematic drawings of Control and protection and 11 kV switchgear.- Coordinate with end user departments (GSM, GSP , Telecom, RTU & SAS dept.) and LDC operation at site.- Inspect material and witness SCADA equipment FAT.- Attend FAT of Control and Protection panel. 3 On-Site Execution Activities - Supervise delivery of equipment on site and its placement.- Receive equipment on site.- Oversee erection of SCADA, RTU and SAS equipment as per company HSEQ guideline and PID SOPs- Supervise Parameterization and interfacing of RTUs and SAS system.- Supervise programming and installation of database in between new and existing, RTU and SAS System.- Management activities according to planned outages on site.- Coordinate with contractors, end user (GSM, GSP, Telecom, RTU & SAS department) and LDC operation for witnessing of SAT on site..- Identify and prepare punch list items.

area of responsibility continue4 Post-Site Activities - Ensure closure of all punch list issues.- Ensure complete handing over to end user department along with database and as-built drawings.- Handle DLP and warranty issues at site.- Prepare lesson learned and share with line manager.- Assist in material reconciliation.5 Documentation - Ensure timely preparation of RTU/SAS, SCADA and Telecom activities for monthly progress report and keep record of it.- Ensure timely response to Siemens Progress Report and keep its record.- Assist with technical specifications and maintain their record.- Keep record of schematic drawings and design files.- Assist with monthly progress presentations.- Ensure timely dispatch of design files, as-built drawings and other technical documents to end user. 6 Health safety environment and quality(HSEQ) - Ensure compliance with Nepra safety code and SLA criteria in site execution activities.- Ensure compliance with Pakistan Environment Protection Agency (PEPA) in RTU & SAS section- Ensure implementation of ISO 9001:2008 standards in RTU & SAS section- Review risk Assessments for RTU & SAS activities.

Knowledge and Skills:- Bachelor’s in Engineering (Electronic/Electrical/Telecom)- 2 years of Experience in RTU & SAS System.Extensive knowledge of Remote terminal Unit (RTU) of Siemens, ABB, and SEL.Good Knowledge of Substation Automation system of GE, SEL, Siemens and ABB.Broad knowledge of various cyber-security Protocols such as Advanced encryption system, Data Encryption Standard, Elliptic Curve Cryptography, Diffie-Hellman.Widespread skills in MS Excel, Power View, Power BI, MS project, Visio, MS PowerPoint and MS Word.Basic knowledge of RTU Software OPM-II, PSR, CAEx Plus.General knowledge regarding User Interface, Independent Front-End System, Human-machine interface, Load forecasting, and switching procedure management.Working Knowledge of SCADA servers, Barco Wall, UPS, Fire Fighting and HVAC System.Widespread knowledge of IEC 61850 8-1 GOOSE Messages, IEC 61850 9-2 process bus communication, IEC 60870-5-101, and IEC 60870-5-104.Basic knowledge of High and medium voltage equipmentProject Planning and ImplementationKnowledge of IEC/ANSI/DN codesKE provides equal employment opportunity (EEO) to all persons regardless of age, color, origin, physical or mental disability, race, religion, creed, gender, marital status, status with regard to public assistance or any other characteristic protected by federal, state or local laws.

Job Purpose:This position supervises and assists execution of ETC for Remote terminal unit, Substation Automation System and SCADA at new and existing grids of KE, as well as IPPs, according to approved method statement, design and HSEQ procedures within stipulated time schedule, coordinate with contractor, end user and LDC operation, assist managers in development, planning, technical bid review, design/drawing reviews, witnessing of FAT and SAT, material handling, preparation and closure of snag list and attending DLP/Warranty issues. These responsibilities are carried out with the objective to utilize resources efficiently and enhance operational efficiency within the limits of company’s policies and procedures, corporate objectives & strategy, directions / guidelines from higher management, HSE guidelines, international IEC/ANSI/DN standards and regulatory / statutory framework of Pakistan.

Transmission Grid Division in Telecom SCADA Department Job Purpose: • Manage/Attend preventive maintenance Schedule of Telecom/Wireless Equipments. • Carried out faults rectification, installation, and re-commissioning of Telecom /Wireless Equipments. • Update and maintain Tele-protection, Data, and speech communication. Specific Duties & Responsibilities: • Plan & supervise PLC outdoor coupling installation work as well as Wireless communication Installation. • Laying and Testing of fiber optic cables terminated at marshalling panels. • Provide assistance in project works related to Telecommunication system. • Perform Tele-protection testing with coordination of Protection Department. • Maintain RTU Data Channels with coordination of SCADA Department. • Responsible for repair work pertaining to faulty components brought in work shop. • Carried out site survey for new Installation, shifting and dismantling of Telecom/Wireless system. • Issuance of spares from the Inventory to attend faults and updated their record. • Train newly inducted AEs and NON-Management Staff. • Carried out Inspection of Telecommunication Equipments and accessories at Central Store. • On-Call duty for 24 hours. • Compliance to corporate governance, and maintain office decorum and proper functioning of general office work. • Accountable for performance of timely completion of objectives through APA

Purpose:This position assists & supervises in the planning, developing, implementing and execution of Telecommunication projects for KE Grids & Transmission. The primary responsibility is to support in Telecommunication systems day to day project management activities which includes developing project technical specification, BOQ's and cost estimation, execute and help in preparing technical bid evaluation report, assigning task to Contractors, implement policies and procedures at project sites progress review meetings. Coordinate with GSM, GSP, Telecom, SCADA/RTU maintenance, LDC operation and contractors for day to day project activities, witnesses of FAT, SAT and ensure timely project execution. These responsibilities are supported with the objective to operate resources efficiently and improve operational efficiency within the limits of company's policies and procedures, corporate objectives & strategy, directions / guidelines from higher management, HSE guidelines, international IEC/ ANSI/ DN standards and regulatory / statutory framework of Pakistan

Area Of Responsibilities: Project Development and Tendering (25%) Assist in preparation of preliminary designs, work scopes, BOQ's and Cost estimations possibly based on the technical feedbacks and other requirements. Assist in the planning and developing of Telecommunication systems and requirements. Develop technical equipment specifications and SWD of Telecommunication system. Assist in coordination of pre-bid and post-bid queries and resolve issues through meetings to negotiate specific and special provisions with mutual understanding. Perform technical bid evaluation submitted by contractors and prepare reports. Project Management & Execution (35%) Visit and supervise project sites frequently to monitor progress and ensure implementation of established procedures. Arrange frequent meetings with contractors and user departments to resolve issues and design clarification. Assist in reviews and analyze technical design of Telecommunication System and recommend for approval. Review and analyze schematic drawings of telecom and recommend for approval. Provide technical assistance to project team and make necessary decisions to resolve pending issues. Witness of FAT activities. Witness of SAT activities. Supervise of site activities of telecom equipment installation. SDH/PDH, ODF, PLC, PABX, MDF, 48VDC System, Microwave, VHF Radio System, Line trap, CVT and CC, LMU, FOC Cables, Coaxial Cables, OPGW etc. Supervise of pre-commissioning and commissioning activities. SDH/PDH, ODF, PLC, PABX, MDF, 48VDC System, Microwave, VHF Radio System, Line trap, CVT and CC, LMU, FOC Cables laying & splicing, Coaxial Cables laying, OPGW laying, Out-door Equipment's installation etc.

Area of Responsibility Continued Project Documentation (25%) « Review FAT protocol and handle the FAT witness documents. « Review SAT protocol and handle the SAT witness documents. « Assist in Review & comment on training contents and handle contractual trainings for telecom as per SoW. « Ensure timely preparation of Telecom activities for monthly progress report and keep record of it. « Ensure timely response to Siemens Progress Report and keep its record. « Assist in monthly progress presentations. « Ensure timely dispatch of design files, as-built drawings and other technical documents to end user. « Maintain & handle monthly TBTs records of SCADA & Telecom team members and share with concern HSE coordinator. Project Closure (15%) Assist in witnessing of the project invoices. Coordinate with user for jointly preparing the punch list for closure of the project. Assist in issuance of Taking over Certificate (TOC) to the contractors. Handle the taking and handing over material and equipment. Review and witness project material reconciliation report. Prepare a report of lesson learned to eliminate gaps for Manager & DGM (Telecom)Handle with contractor and end user for DLP and warranty issue as per contract. KE provides equal employment opportunity (EEO) to all persons regardless of age, color, origin, physical or mental disability, race, religion, creed, gender, marital status, status with regard to public assistance or any other characteristic protected by federal, state or local laws.

Competencies Overhead Transmission Maintenance_AM-DM Safety Awareness_AM-DM Power Stability and Reliability_AM-DM Plant Maintenance and Operations_AM-DM Data Analytics and Reporting_AM-DM Industry Principles and Concepts_AM-DM Grid Station Earthing_AM-DM Instrumentation and Control _AM-DM Engineering Drawing_AM-DM Mental Agility_AM-DM Project Management_AM-DM Grid and Transmission Network Operations_AM-DM SAP Management_AM-DM Drives Change_AM-DM Drives Results_AM-DM Cyber Security Fundamentals_AM-DM Systems and Substation Automation System_AM-DM Electrical Maintenance_AM-DM Building High Performance Teams_AM-DM Troubleshooting_AM-DM Financial Acumen_AM-DM Oracle Database Administration_AM-DM Substation Protection System_AM-DM Telecommunication Networks_AM-DM Project Construction Monitoring_AM-DM Quality Control and Continuous Improvement_AM-DM Power System Protection_AM-DM Self Awareness_AM-DM Stakeholder Management_AM-DM Process Safety Management_AM-DM

Testing & commissioning of Sub-station up to 110 kV including GIS, transformers, protection, control, metering, annunciator, Bus-Bar panels and CBs, ES/DS, CTs, PTs, surge arrestors etc. - Planning project schedules, safety method statement, daily progress monitoring reports & other routine assignments necessary for swift & safe execution of the project. - Written & verbal communication with other project associated agencies (Client, Contractors, safety department, Short time planning (STP),Network Control Department, Substation maintenance Department, Design Engineering Department (DED), Protection Engineering Department(PED) & Project Management department Executed Projects: -December 2021- Fault attend to rectify telecom link and RTU data at different grid for PLC , FOX, OSN equipments-November 2021- Avail SD of 66kV 132kV and 220kV outdoor couplings at different grids for RTU Coating & then DFT testings of linetrap/ wavetrap-October 2021-standby rain emergency duty at KDA-August 2021- Line differential fiber testing and end to end teleprotection testing in coordination with GSMP and Siemens team at different grid-February 2021- Availed SD of 220kV nki-bal for outdoor coupling maintenance bal end and different grids linked-October 2020- Huawei NMS and OSN, Siemens DPSE SWT3000 training at Siemens Factory under TP1000 Project-October 2020- Installation of new OPGW 18km at Surjani- Baldia -KDA-NKI 220kV transmission line circuit and cleared EHT circuit for normalization-September 2020- Attend OPGW Fault at Baldia - SGT - HAR-NNZ-Surjani 132kV transmission line and cleared EHT circuit for Normalization-September 2020- Installation of Telecom System at Old Golimar Grid with PID Team -August 2020-Office Work & Rain Emergency Duties &Prepare SOP of UFOC-August 2019-Testing & commissioning of 110/13.8 KV ICY 6 Baldia- August 2019-Testing & commissioning of 66 KV Switching Station Bela-Uthal-Vinder

-December 2023-Checking Alarm of chargers, PABX, SDH, and PLC system locally at different grids-October 2023-Survey of 66kV 132kV and 220kV Gantry foundation and installation of new Foundation of Wave trap/line trap at different grid with GSO teams and Siemens and other subcontractors-August 2023- Setting of gain to remove RX alarm of different grid nodes for 66kV 132kV 220kV PLC links-July 2023- OTDR Testing of Spare fiber cores at different grid for differential protection and SCADA SDH 101 104 data-June 2023- Taking logs of PLC at different grids for transmission line of 66kV 132kV and 220kV PLC Communications Tripping-April 2023- Removal of bird next from OPGW Joint box and supervise splicing team of OPGW and UGFOC at 66kV 132kV and 220kV tower and clear energization after clearance of EHT circuit-March 2023- Replacement of LT/wavetrap upper clamp and lowerclamp with the help of crane under supervision of CPM and other contractor and crane -January 2023-Thermography inspections and Meggereing of telecom indoor and outdoor equipment wave trap/linetraps at all grids-January 2023- Battery Load testing of 48V DC battery bank at Different grid -December 2022- Alaram Management from Qayyumabad Complex- October 2022-Surveys and Installation of 132kV 18km NNZ-VAL , VAL- SHD , VAL- SUR OPGW- by CPM Contractor -August 2022- Monitoring of FOX OSN and SCADA alrams and radio devices from Qayyumabad Telecom Control Room-July 2022- Rain emergency duty at Qayyumabad Grid Control Room-May 2022- Supervised M/s Selta teams for the configuration of existing PABX and installation of new PBX Systems at different grids-April 2022- Survey of 66kV 132kV and 220kV OPGW hardware and OPGW red hot issue and resolve it at gantry tower and line towers in coordination with CPM and other contractors-March 2022-Survey and dismantalling of line trap/wave trap and PLC systems and installation of Huawei SDH OSN on fiber optic cable link at different grid with Siemens and PID teams

January 2024 to till now-Supporting GSMP team for differential relay fiber healthyness checking and termination of distance protection wiring at PLC, OSN, FOX, SDH and different grids-January 2024 to till now- Installation of SDH and Laying of FOC and TP Cables at different grids-January 2024 to till now- in OPGW Wireless Patrolling and Survey Works-January 2024 to till now - Working as Cyber Security team DM for Commission laptop and software data bank Auditor-February 2024-Laying for HF cable from new control room to Old PLC room at different Grid -March 2024-Data testing and E1 configuration at different grid stations-April 2024- Rectification of fiber cores by re splicing of joint box on 66kV 132kV 220kV tower -May 2024-Provide Remote Subscriber to different grid remotely via PLC/SDH/FOX by connecting then with SELTA PABX Server-June 2024- Witnessed SAT of PABX Selta Server PABX with Siemens Team and PID Team at different 66KV 132kV & 220KV grids -June 2024-Checking Logs of tripping at PLC panel at different grids-July 2024- Survey Patrolling Completed for all Karachi OPGW towers and solve opgw hardware descrepancies with PID and Siemens , CPM and other Contractor--July 2024 to till now- dealing with Revex budget tractor, create Revex cases PR , SES and take approvals and coordinate with business finance department for PO issuance-December 2024-Visiting Store in coordination with Business Finance Department and Insurance Department for Insurance Claim of Burnt Cases items/Panel-December 2024-Nominated for Environmental Compliance for Environment Related Trainings and Other Stuff.

Testing & commissioning of Sub-station up to 110 kV including GIS, transformers, protection, control, metering, annunciator, Bus-Bar panels and CBs, ES/DS, CTs, PTs, surge arrestors etc. - Planning project schedules, safety method statement, daily progress monitoring reports & other routine assignments necessary for swift & safe execution of the project. - Written & verbal communication with other project associated agencies (Client, Contractors, safety department, Short time planning (STP),Network Control Department, Substation maintenance Department, Design Engineering Department (DED), Protection Engineering Department(PED) & Project Management department Executed Projects: -November 2016- Installation of AVR for Tabarjal Power Plant 33/13.8 kV Substation PTS-12ED418-October 2015-Improvement of SCADA & Communications System in QURAYAT PP 132/33kV and SS 33KV at Qurayat City- October 2015-Testing & commissioning of 110/13.8 KV ICY 6 Batha Quresh - October 2015-Testing & commissioning of 33 KV Switching Station CC-1 and CC-2 PTS-12ED421 PTS-12ED422-October 2015- PTS Review and Site Review and Project Execution of Retrofitting of Circuit Breaker in EOA PTS-16ED402, PTS-14ED414 PTS-12ED415 PTS-11ED415-December 2014- Installation of Fiber Optic Cable to integrate various offices in EOA PTS-14ED420-November 2014-Repalcement of ABTS, RTCC, ATS in EOA PTS-13ED427-October 2014- Process of Preparation of SAS Engineering Document for 33KV S/S- Prepare SOW-December 2013- Reinforcement of Sadea 33/13.8 kV S/S PTS-09ED415-December 2012- Report on Substation Automation System with Distribution Standard Committee and ABB, Siemens and SEL SAS Technical Team- January 2012- Joined SEGI on 7th-January- 2012 on Job seeker visa for getting job in SEC Jeddah later demobilized in March 2012 and then join SECECo HQ Dammam in July-2012

Purpose.This position assists & supervises in the planning, developing, implementing and execution of Telecommunication projects for SE Grids & Transmission. The primary responsibility is to support in Telecommunication Systems day to day project management activities which includes developing project technical specification, BOQ’s and cost estimation, execute and help in preparing technical bid evaluation report, assigning tasks to Contractors, implement policies and procedures at project sites progress review meetings. Coordinates with GSM, GSP, Telecom, SCADA/RTU maintenance, LDC operation and contractors for day to day project activities, witnesses of FAT, SAT and ensure timely project execution. These responsibilities are supported with the objective to operate resources efficiently and improve operational efficiency within the limits of company’s policies and procedures, corporate objectives & strategy, directions / guidelines from higher management, HSE guidelines, international IEC/ANSI/DN standards and regulatory / statutory framework of Pakistan.EducationBE (Electronics) KnowledgeGood Knowledge of Power Utility Telecommunication Systems.Extensive knowledge of Telecom equipment & Networking, SDH/PDH, ODF, PLC, PABX, MDF, 48VDC System, Microwave, VHF Radio System, Line trap, CVT and CC, LMU, FOC Cables, Coaxial Cables, OPGW etc of various Vendors i.e HUAWEI, NEC, SIEMENS, ABB.Installation of Outdoor Equipment.Commissioning & Laying of FOC and coaxial cables. Knowledge of Project Management & estimation, BOQ preparation and scope clarification. - Skill in MS Excel, Power View, Power BI, MS project, Visio, MS PowerPoint and MS Word.Business & finance Acumen.Knowledge of HSEQ in Power Transmission Network environment.Experienceminimum of 2 years of experience in Power Utility Telecommunication System

Competencies.Builds High Performance Team > (Value = Respectful / Energized)DRIVES CHANGE > Value (ENERGIZED)DRIVES RESULTS > Value (CUSTOMER CENTRIC + ENERGIZED)SafeMENTAL AGILITY > Value (ENERGIZED)SELF AWARENESS > Value (ACCOUNTABILITY)INTERNAL & EXTERNAL STAKEHOLDER MANAGEMENT > Value (CUSTOMER CENTRIC + RESPECTFUL)Area of ResponsibilitiesProject Development and Tendering (25%)Assist in preparation of preliminary designs, work scopes, BOQ’s and Cost estimations possibly based on the technical feedbacks and other requirements.Assist in the planning and developing of Telecommunication systems and requirements.Develop technical equipment specifications and SWD of Telecommunication system.Assist in coordination of pre-bid and post-bid queries and resolve issues through meetings to negotiate specific and special provisions with mutual understanding.Perform technical bid evaluation submitted by contractors and prepare reports. Project Management & Execution (35%)Visit and supervise project sites frequently to monitor progress and ensure implementation of established procedures. Arrange frequent meetings with contractors and user departments to resolve issues and design clarification.Assist in reviews and analyze technical design of Telecommunication System and recommend for approval.Review and analyze schematic drawings of telecom and recommend for approval.Provide technical assistance to project team and make necessary decisions to resolve pending issues.Witness of FAT activities.Witness of SAT activities.Supervise of site activities of telecom equipment installation.SDH/PDH, ODF, PLC, PABX, MDF, 48VDC System, Microwave, VHF Radio System, Line trap, CVT and CC, LMU, FOC Cables, Coaxial Cables, OPGW etc.Supervise of pre-commissioning and commissioning activities.SDH/PDH, ODF, PLC, PABX, MDF, 48VDC System, Microwave, VHF Radio System, Line trap, CVT and CC, LMU, FOC Cables laying & splicing, Coaxial Cables laying, OPGW laying, Out-door Eqp.

Area of Responsibility Continued.Project Documentation (25%)Review FAT protocol and handle the FAT witness documents. Review SAT protocol and handle the SAT witness documents. Assist in Review & comment on training contents and handle contractual trainings for telecom as per SoW. Ensure timely preparation of Telecom activities for monthly progress report and keep record of it. Ensure timely response to Siemens Progress Report and keep its record. Assist in monthly progress presentations. Ensure timely dispatch of design files, as-built drawings and other technical documents to end user. Maintain & handle monthly TBTs records of SCADA & Telecom team members and share with concern HSE coordinator. Project Closure (15%)Assist in witnessing of the project invoices.Coordinate with user for jointly preparing the punch list for closure of the project.Assist in issuance of Taking over Certificate (TOC) to the contractors.Handle the taking and handing over material and equipment.Review and witness project material reconciliation report.Prepare a report of lesson learned to eliminate gaps for Manager & DGM (Telecom)Handle with contractor and end user for DLP and warranty issue as per contract.SE provides equal employment opportunity (EEO) to all persons regardless of age, color, origin, physical or mental disability, race, religion, creed, gender, marital status, status with regard to public assistance or any other characteristic protected by federal, state or local laws.

To take care of cdma MSC(huawei) ...equipments like hlr9820,umg8900,csoftx3000 and m2000 ..... to record all the daily KPIs for performance observations ... to troubleshoot and coordinate with the vendor for trouble tickets , to manage the team of 6 engineers and technician regarding daily operations in 24/7 shifts.  Providing 1st and 2nd level diagnostics Support CDMA 2000 Technology commercial clients on a 24 x 7 pager rotation schedule.  Implementation and troubleshooting of the CDMA2000 Core Network Services  Fault logging, management and follow up to resolution in line with SLA with Customer Support Team .  Escalation of all unresolved network issues/TT to Vendor (Huawei)  Distribution of tasks to all the Engineers in the NSS , As per their Capacity.  Configuration and trouble shootings of Signaling Integrations with the peers( TMSCs of other Operators) through the DTEs of Telecom Authorities In Pakistan and Coordination with them for resolving problems with the Interconnects and other Media Related Issues  Reporting Of the KPIs to the Higher Management.  Vendor Interface .