Hossain Muhammad Rakib Email & Phone Number

Dhaka, Bangladesh

Name of Project: Feasibility Study, Detailed Design and other Preparatory Study of The Dhaka-Chattogram National Highway (ADB Loan 6030-Bangladesh-Ban:Transport Connectivity Improvement Project Preparatory Facility) Key Responsibilities:-Review and site verification of Topographic Surveys and other surveys prepared by the sub-consultants.- Designing Centerline Alignments based on topographic surveys following RHD and AASHTO guidelines.-Creating Surface Models from elevation data from topographic surveys.-Designing of vertical alignments following RHD and AASHTO guidelines.-Ensuring design considers adequate drainage facilities to prevent water-logging.-Prepare corridors based on assemblies and design criteria of RHD and AASHTO guidelines.-Preparation of Plan Production sheets, cross-sections, earth volume and turfing calculations, utility relocation plan, land acquisition plan.-Intersection/Interchange design to ensure mobility and FIFO principle.-Designing of embankment and side slope protection works.-Preparation Traffic Diversion/ Re-routing Plan during construction works.-Traffic Sign and Road Marking Design Preparation as per (Bangladesh Road Transport Authority) BRTA manual.

Bangladesh

Name of Project: Feasibility Study on Dhaka Outer Ring Road: Eastern, Western and Northern Part ProjectKey Responsibilities:-Review and site verification of Topographic Surveys and other surveys prepared by the sub-consultants.- Designing Centerline Alignments based on topographic surveys following RHD and AASHTO guidelines.-Creating Surface Models from elevation data from topographic surveys.-Designing of vertical alignments following RHD and AASHTO guidelines.-Ensuring design considers adequate drainage facilities to prevent water-logging.-Prepare corridors based on assemblies and design criteria of RHD and AASHTO guidelines.-Preparation of Plan Production sheets, cross-sections, earth volume and turfing calculations, utility relocation plan, land acquisition plan.-Intersection/Interchange design to ensure mobility and FIFO principle.-Designing of embankment and side slope protection works.-Preparation Traffic Diversion/ Re-routing Plan during construction works.-Traffic Sign and Road Marking Design Preparation as per (Bangladesh Road Transport Authority) BRTA manual.

Bangladesh

Name of the Project: Consulting Services for Design and Supervision at Bangabandhu Sheikh Mujib Shilpa Nagar (BSMSN) [Funded by World Bank] Main Project Feature: Digital Topographical Survey, Hydrological & Morphological Study, Sub-Soil Investigation, Detailed design of Roads, Bridge, Drainage structures, Embankment Design, Administrative and Operational Building Structure Design, Design of Utilities, Environmental and Social Impact Assessment, Construction SupervisionKey Responsibilities: -Review and site verification of Topographic Surveys, Sub-soil Investigation and other surveys prepared by the sub consultants. -Designing Centerline Alignments based on topographic surveys following RHD, AASHTO and LGED guidelines. -Creating Surface Models from elevation data from topographic surveys. -Designing of vertical alignments following RHD, AASHTO and LGED guidelines. -Ensuring design considers adequate drainage facilities to prevent water-logging. -Prepare corridors based on assemblies and design criteria of RHD, AASHTO and LGED guidelines. -Preparation of Plan Production sheets, cross-sections, earth volume and turfing calculations, utility relocation plan. -Intersection/Interchange design to ensure mobility and FIFO principle. -Designing of embankment and side slope protection works. -Preparation Traffic Diversion/ Re-routing Plan during construction works. -Traffic Sign and Road Marking Design Preparation as per (Bangladesh Road Transport Authority) BRTA manual. -Pavement Design as per AASHTO manual.

Bangladesh

Name of the Project: Consultancy Services for “Feasibility Study of Proposed Dhour-Kadda-Salna Road (Approx. Length is 18.800 km) under Roads & Highways Department, Dhaka Road Circle, Dhaka [Funded by Government of Bangladesh] Main Project Feature: Digital Topographical Survey, Traffic survey, Hydrological & Morphological Study, Sub-Soil Investigation, Feasibility Study of roads, bridge, Drainage structures, Environmental and Social Impact Assessment, Economic & Financial Analysis, Feasibility Study.Key Responsibilities: -Review and site verification of Topographic Surveys and other surveys prepared by the sub-consultants. -Designing Centerline Alignments based on topographic surveys following RHD and AASHTO guidelines. -Creating Surface Models from elevation data from topographic surveys. -Designing of vertical alignments following RHD and AASHTO guidelines. -Ensuring design considers adequate drainage facilities to prevent water-logging. -Prepare corridors based on assemblies and design criteria of RHD and AASHTO guidelines. -Preparation of Plan Production sheets, cross-sections, earth volume and turfing calculations, utility relocation plan, land acquisition plan. -Intersection/Interchange design to ensure mobility and FIFO principle. -Designing of embankment and side slope protection works. -Preparation Traffic Diversion/ Re-routing Plan during construction works. -Traffic Sign and Road Marking Design Preparation as per (Bangladesh Road Transport Authority) BRTA manual.Additional Responsibilities: -Pavement Design as per AASHTO manual. -Traffic Management Plan & Safety Measures. -Checking of Estimates.

Bangladesh

Name of the Project: Western Economic Corridor; Regional Enhancement Program (WeCare) Phase-I: Rural Connectivity, Market and Logistic Infrastructure Improvement Project (RCMLIIP) [Funded by World Bank] Main Project Feature: Digital Topographical Survey, Traffic survey, Hydrological & Morphological Study, Sub-Soil Investigation, Feasibility Study and Detailed design of roads, bridge, drainage structures and growth center markets, Environmental and Social Impact Assessment, Economic & Financial Feasibility Study.Key Responsibilities: -Review and site verification of Topographic Surveys, Traffic Surveys other surveys prepared by the sub-consultants. -Designing Centerline Alignments based on topographic surveys following LGED, RHD and AASHTO guidelines. -Creating Surface Models from elevation data from topographic surveys. -Designing of vertical alignments following LGED, RHD and AASHTO guidelines. -Ensuring design considers adequate drainage facilities to prevent water-logging. -Preparation of traffic Study & analysis reports considering future traffic flows. -Prepare corridors based on assemblies and design criteria of LGED. -Preparation of Plan Production sheets, cross-sections, earth volume and turfing calculations, utility relocation plan, land acquisition plan. -Designing of embankment and side slope protection works. -Preparation Traffic Diversion/ Re-routing Plan during construction works. -Traffic Sign and Road Marking Design Preparation as per (Bangladesh Road Transport Authority) BRTA manual

Bangladesh

Name of the Project: Feasibility Study with improvement of different intersections including traffic signal under DSCC area [Funded by Government of Bangladesh] Main Project Feature: Feasibility study of selected intersections for improvement along with enhancement of traffic flow, capacity and efficient traffic management system. Introduction of modern traffic signaling system design with intelligent traffic management technology.Key Responsibility: -Review of traffic survey data (Mid-Block Counts, Turning Movement Counts, Pedestrian Volume Counts, Public Transport User-Non-User Survey, Parking Surveys, Travel Time Surveys) -Investigating reasons for existing situation, pin-pointing bottleneck for the traffic congestion area. -Analysis of present traffic conditions with existing geometry of junctions and corridor capacity analysis based on the calculated volume/capacity ratios and microscopic simulation on VISSIM. -Design of new alignment with other geometric configurations and proposing traffic circulation to improve existing condition. -Designing Centerline Alignments based on topographic surveys following DSCC and AASHTO guidelines. -Designing of vertical alignments following DSCC and AASHTO guidelines. -Ensuring design considers adequate drainage facilities to prevent water-logging -Identifying traffic black spots from accident data collected from various secondary verified sources and proposing measures to eliminate the traffic black spots. -Assessing impact of proposed design using calibrated microscopic simulation models of the corridors. -Traffic Sign and Road Marking Design Preparation as per Bangladesh Road Transport Authority (BRTA) manual. -Pavement Design as per AASHTO. -Preparation of road Layout plans, cross-sections and other necessary designs drawings.

Bangladesh

Name of the Project: Feasibility Study with improvement of different intersections including traffic signal under DSCC area [Funded by Government of Bangladesh] Main Project Feature: Feasibility study of selected intersections for improvement along with enhancement of traffic flow, capacity and efficient traffic management system. Introduction of modern traffic signaling system design with intelligent traffic management technology.-Review of traffic survey data (Mid-Block Counts, Turning Movement Counts, Pedestrian Volume Counts, Public Transport User-Non-User Survey, Parking Surveys, Travel Time Surveys) -Investigating reasons for existing situation, pin-pointing bottleneck for the traffic congestion area. -Analysis of present traffic conditions with existing geometry of junctions and corridor capacity analysis based on the calculated volume/capacity ratios and microscopic simulation on VISSIM. -Design of new alignment with other geometric configurations and proposing traffic circulation to improve existing condition. -Designing Centerline Alignments based on topographic surveys following DSCC and AASHTO guidelines. -Designing of vertical alignments following DSCC and AASHTO guidelines. -Ensuring design considers adequate drainage facilities to prevent water-logging -Identifying traffic black spots from accident data collected from various secondary verified sources and proposing measures to eliminate the traffic black spots. -Assessing impact of proposed design using calibrated microscopic simulation models of the corridors. -Traffic Sign and Road Marking Design Preparation as per Bangladesh Road Transport Authority (BRTA) manual. -Pavement Design as per AASHTO. -Preparation of road Layout plans, cross-sections and other necessary designs drawings.

Bangladesh

Name of the Project: Construction Supervision of Sayedpur Bridge, Detailed Design of Hasanabad Intersection, Detailed Design and Estimate of 4- Lane Buriganga Bridge at Postogola and Preliminary Design of Buriganga Bridge at Fatulla Narayangonj [Funded by Government of Bangladesh]Main Project Feature: Carry out detailed economic and engineering investigation to examine economic viability and technical feasibility of Construction Supervision of Sayedpur Bridge, Detailed Design of Hasanabad Intersection, Detailed Design and Estimate of 4- Lane Buriganga Bridge at Postogola and Preliminary Design of Buriganga Bridge at Fatulla which will reduce through traffic and disperse incoming and outgoing traffic to reduce traffic congestion of inner road network of Dhaka City. This study and will undertake Digital Topographical Survey, Traffic survey, Hydrological & Morphological Study, Sub-Soil Investigation, Feasibility Study and Detailed design of roads, bridge, drainage structures, Environmental and Social Impact Assessment, Economic & Financial Feasibility Study.Key Responsibility: -Review of traffic survey data (Mid-Block Counts, Turning Movement Counts, Speed delay Surveys, Origin-Destination Surveys, Axle Load Surveys) -Analyzing traffic survey data to forecast demand for 30 years projection for proposed road which will also consider annual population and real per capita growth rate. and its demand in relation to income and estimated annual production increase. The other aspects including socio-economic development plans and the land use patterns of the city and cross elasticity shall have to be taken into consideration. -Analysis of present traffic conditions with existing geometry of junctions and corridor capacity analysis based on the calculated volume/capacity ratios and proposing requirements for improving traffic conditions.-Assessing impact of proposed design using calibrated microscopic simulation models of the corridors.

Dhaka, Bangladesh

Name of the Project: Traffic Study Cum Junction Design in DSCC (PACKAGE DCNUP/S-04) [Funded by World Bank]Key Responsibility: -Designing Centerline Alignments based on topographic surveys following DSCC and AASHTO guidelines. -Designing of vertical alignments following DSCC and AASHTO guidelines. -Ensuring design considers adequate drainage facilities to prevent water-logging. -Traffic Sign and Road Marking Design Preparation as per Bangladesh Road Transport Authority (BRTA) manual. -Pavement Design as per AASHTO. -Preparation of road Layout plans, cross-sections and other necessary designs drawings. -Review of traffic survey data (Mid-Block Counts, Turning Movement Counts, Pedestrian Volume Counts, Public Transport User-Non-User Survey, Parking Surveys, Travel Time Surveys) -Investigating reasons for existing situation, pin-pointing bottleneck for the traffic congestion area. -Analysis of present traffic conditions with existing geometry of junctions and corridor capacity analysis based on the calculated volume/capacity ratios and microscopic simulation on VISSIM. -Design of new alignment with other geometric configurations and proposing traffic circulation to improve existing condition. -Identifying traffic black spots from accident data collected from various secondary verified sources and proposing measures to eliminate the traffic black spots. -Assessing impact of proposed design using calibrated microscopic simulation models of the corridors. -Traffic Management Plan & Safety Measures.

Dhaka, Bangladesh

Name of the Project: Dhaka City Neighborhood Upgrading Project (DCNUP) [Funded by World Bank]Main Project Feature: Feasibility study and detailed design of open spaces, community centers, roads, culverts and aesthetic bridge structures, heritage building. Preparation of Sub-Project Appraisal Report (SPAR), Detailed Engineer Design (DED), Sub-project Bidding Documents, Construction Supervision, As-built Drawings, Design Review, Preparation and checking of Estimates & Bill of Quantities, Reporting etc. for all sub-projects.Key Responsibility: -Designing centerline & vertical alignments based on topographic surveys following DSCC and AASHTO guidelines. -Ensuring design considers adequate drainage facilities to prevent water-logging. -Review of traffic survey data (Mid-Block Counts, Turning Movement Counts, Pedestrian Volume Counts, O-D surveys) -Traffic impact assessment of proposed facilities on existing neighborhood roads, secondary roads and primary roads and provide necessary mitigation measures if necessary. -Analysis of present traffic conditions with existing geometry of junctions and corridor capacity analysis based on the calculated volume/capacity ratios and microscopic simulation on VISSIM. -Traffic impact assessment of proposed developments on existing roads. -Identifying traffic black spots from accident data collected from various secondary verified sources and proposing measures to eliminate the traffic black spots. -Traffic Sign and Road Marking Design Preparation as per Bangladesh Road Transport Authority (BRTA) manual. -Pavement Design as per AASHTO. -Preparation of road Layout plans, cross-sections and other necessary designs drawings. -Preparation of Construction Site Traffic Management Plan (CSTMP). -Preparation of Monthly and Quarterly Traffic Control Monitoring Report.

Dhaka, Bangladesh

Improvement of Damaged Roads, Drainage, Footpath and Road Safety (IDRS) of Different Zones Under Dhaka North City Corporation. [Funded by Government of Bangladesh]Main Project Feature: Construction Supervision, Design Preparation & Review, Preparation of As-built Drawings, Preparation and checking of Estimates & Bill of Quantities, Preparation of Comparative Statements, Interim Payment Certificate & Summary Sheet, Preparation of Progress and Quality Control reports etc.Key Responsibility: -Design Review. -Design of new alignment with other geometric configurations and proposing traffic circulation to improve existing condition. -Traffic Sign and Road Marking Design Preparation as per Bangladesh Road Transport Authority (BRTA) manual. -Pavement Design as per AASHTO. -Preparation of road Layout plans, cross-sections and other necessary designs drawings. -Traffic Management Plan & Safety Measures.-Construction Supervision.Additional Responsibility: -Box Culvert Design, Analysis & Bill of Quantities (BoQ) Preparation. -Monthly Progress Report Preparation. -Quarterly Progress Report Preparation. -Checking of Bills and Preparation of Estimates. -Preparation of Quality Control Reports.

Dhaka, Bangladesh

Design and Supervision of Multi-Storied Commercial Buildings (New Construction & Vertical Extension) at Mongla Pouroshova (Funded by World Bank).Main Project Feature: Structural Design & analysis, Pavement Design, Internal Road Network Design, Preparation of Bill of quantities and construction supervision.Key Responsibility: -Structural Design and Analysis. -Foundation Design. -Preparation of Structural Drawings and Details. -Road Geometry Design. -Pavement Design. -Construction Supervision.

Master'S Degree, Transportation

Bachelor Of Science - Bs, Civil Engineering

Higher Secondary School (Hsc), Science

Secondary School Certificate (Ssc), Science