Hung Vu Email & Phone Number

Germany

Vietnam

Germany

• Design optimization of MW direct-drive generators for wind and tidal applications.• 2D and 3D transient FEM model for electromagnetic design of generators.• 3D FEM thermal and mechanical model of generators.• Back to back full power electronic converters modeling.• C/C++ embedded softwares to control converters and electric machines.• Pitch drives for MW wind turbines: all aspects from software, hardware to testing developed prototype.

Netherlands

• Electromagnetic analysis and design of direct-drive 3 kV/5 MW permanent magnet generators for offshore wind turbines, both distributed and concentrated windings with fraction slots, using analytical model, hybrid model and automated nonlinear transient FEM including rotor motion (using Comsol Multiphysics coupling with Matlab).• Design of segmented multimegawatts-generators for the ease of manufacturing and transportation.• Short circuit modeling and simulation of multimegawatt wind turbine generators.• Electromagnetic forces computation• Analysis and Matlab/Simulink simulation of three-level AC-DC-AC converters for wind turbines. • Harmonic analysis, reactive and active power flow analysis and grid connections simulation using ETAP.• Practically optimized PWM pulses for the sound reduction.• Specifications and maintenance documentations of transformers (CG global, CGS).• Made some documents (electromagnetic analysis and short circuit generator) for offshore wind turbine certificates.

The Netherlands

• Modeling and design optimization of permanent magnet machines for mobility applications• Automated finite element modeling (Matlab Script and Comsol Multiphysics) • Thermal modeling and analysis• Test setup to validate developed models• Matlab GUI via a GPIB interface for electric machines data acquisition • Matlab simulink for active rectifier (extra-works): PWM, PLL, current controllers, DC voltage controller, power flow and power factor control, etc.• Integrated electric machines, electric drives and power electronics (extra-works): modeling, switching power loss modeling, switching-gate drives, LTspice, OrCAD, AutoCAD, thermal management for power electronics, electric machines integration with power electronics.For my papers, please find them in the IEEE Xplore.Selected presentations:• Efficiently automated transient FEM including motion for electric machines: https://www.scribd.com/doc/301287286/An-Efficient-Method-for-Analysis-and-Design-of-Permanent-Magnet-Machines-Presentation-Hung-Vu-IEEE-YRS-17April2012• 3D electromagnetic transient FEM to calculate eddy current loss of electric machines:https://www.scribd.com/document/237121210/Eddy-Current-Distribution-in-Rotor-of-Permanent-Magnet-Generators-using-3D-Transient-FEM• Lumped and 3D transient FEM thermal models: https://www.scribd.com/document/241981713/3D-Transient-FEM-and-Lumped-Parameter-Thermal-Models-Hung-Vu

• Power system.• Electromagnetic calculation, design and manufacturing aspects of MVA transformers.• Non-Destructive Testing (NDT) and testing devices for MVA transformers.• Factory acceptance test consultancy of power and distributed transformers such as polarity, insulation, PD test, noload and short circuit testings, applied voltage test, induced voltage test, lightning impulse test, heat run complying with the standard IEC 60076 or IEEE C57.12.Typical projects concerning manufacturing and testing power and distributed transformers at ABB Hanoi:• Transformer VN186 at ABB Hanoi, Vietnam. Project of BHP Billiton Iron Ore, Australia. Power distribution transformer: 10/13 MVA, 66/6.6 kV. (2005-2006).• Transformer VN 196 at ABB Vietnam. Argyle Diamonds Under Ground Project, Australia. Power distribution transformer: 132/22/11 kV, 20/27 MVA. (2007).• Transformer VN201 at ABB Vietnam. Mine&Port Development Joint Venture, Australia. Power distribution transformer: 16/20MVA 132/33/11 kV. (2007).• Inspection of manufacturing, factory acceptance test and packing of 30 power and distributed transformers at ABB Hanoi, Vietnam. Oil filter plant, Dung Quat project, Vietnam. (2006-2007).• .....

Hanoi, Vietnam

I taught the following subjects: • Electrical engineering • Electronic engineering • Electric machines • Electric drives • Microcontrollers: 8051(Atmel), PSoC(Cypress).Projects have done--(some published papers concerning the projects can be found athttps://www.scribd.com/Hung_Vu_Xuan ): • Design of power electronics converters. • Design of control system based on microcontrollers (PSoC and AT89C51).Selected papers during this period:• Rotor field oriented control and identification of rotor time constant: https://www.scribd.com/doc/88357564/Syntheses-and-Simulations-Method-for-Field-Oriented-Vector-published-in-2005-Hung-Vu-Xuan• Direct torque control for induction motors: https://www.scribd.com/document/97240092/Direct-stator-flux-and-torque-control-for-induction-motors-published-2005• Energy yield of PWM inverter - induction motor system : https://www.scribd.com/document/97241022/Energy-yield-of-PWM-inverter-induction-motor-published-in-2003• Design of control system for winding-wounded CNC machines:https://www.scribd.com/document/97241741/Design-and-Manufacture-Supervision-Measure-and-Control-System-for-CNC-Winding-Hung-Vu-Xuan-published-in-March-2008

Phd Degree, Electrical Engineering

Master'S Degree (First Class), Electrical Engineering

Bachelor'S Degree (First Class), Electrical And Electronic Engineering