◾ Residential building project◾ Alteration of existing building structure◾ Removal of load-bearing walls

◾ Civil and Structural Engineering consultation for planning and building consent approval of SA planning department.◾ Mentoring civil engineering students and fresh graduates - structural analysis, reinforced concrete design, structural steel design and engineering software (Strand7, Space Gass).◾ Research consultation on advanced concrete materials.

𝐂𝐢𝐯𝐢𝐥 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠 ◾ Waste management report and plan of residential houses (Septic tank, Soakage trench and Wastewater Irrigation Management Plan) ◾ Plumbing plan of residential houses𝐒𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐚𝐥 𝐀𝐧𝐚𝐥𝐲𝐬𝐢𝐬 & 𝐃𝐞𝐬𝐢𝐠𝐧 𝐂𝐚𝐥𝐜𝐮𝐥𝐚𝐭𝐢𝐨𝐧 ◾ Portal frame ◾ Steel frame structure ◾ Timber frame structure (residential building) ◾ Raft / Waffle footing𝐅𝐨𝐨𝐭𝐢𝐧𝐠 𝐈𝐧𝐬𝐩𝐞𝐜𝐭𝐢𝐨𝐧 ◾ Footing rebar inspection before casting

𝐒𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐚𝐥 𝐀𝐧𝐚𝐥𝐲𝐬𝐢𝐬 𝐚𝐧𝐝 𝐃𝐞𝐬𝐢𝐠𝐧 𝐂𝐚𝐥𝐜𝐮𝐥𝐚𝐭𝐢𝐨𝐧 ◾ Steel, concrete, and timber structures. ◾ Roof assessment for solar panel installation and crane loadout. ◾ Inverter station support system. ◾ Façade connection system.𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐑𝐞𝐩𝐨𝐫𝐭 𝐖𝐫𝐢𝐭𝐢𝐧𝐠 ◾ Structural inspection report of residential and industrial buildings.

𝐏𝐫𝐨𝐣𝐞𝐜𝐭 - 𝐔𝐋𝐓𝐑𝐀-𝐇𝐈𝐆𝐇-𝐏𝐄𝐑𝐅𝐎𝐑𝐌𝐀𝐍𝐂𝐄 𝐅𝐈𝐁𝐑𝐄 𝐑𝐄𝐈𝐍𝐅𝐎𝐑𝐂𝐄𝐃 𝐂𝐎𝐍𝐂𝐑𝐄𝐓𝐄𝐏𝐫𝐨𝐣𝐞𝐜𝐭 𝐌𝐚𝐧𝐚𝐠𝐞𝐦𝐞𝐧𝐭 ◾ Conducted research progress meeting. ◾ Maintained liaison with the research collaborators and laboratory assistants. ◾ Attended 120 hours of career and research skills training in knowledge and intellectual abilities, personal effectiveness, research governance and organisation, engagement, influence, and impact.𝐑𝐞𝐬𝐞𝐚𝐫𝐜𝐡 ◾ Investigated the effect of corrosion on the tensile strength of ultra-high-performance fibre-reinforced concrete (six months of experiments). ◾ Conducted research on pull-out creep of single hooked-end fibre embedded in concrete (eight months of experiments). ◾ Developed an analytical approach to determine the pull-out load and slip response of fibre embedded in concrete.𝐑𝐞𝐬𝐞𝐚𝐫𝐜𝐡 𝐑𝐞𝐩𝐨𝐫𝐭 𝐖𝐫𝐢𝐭𝐢𝐧𝐠 ◾ Prepared research proposals. ◾ Published three research articles in international peer-reviewed journals. ◾ Prepared annual progress report.𝐒𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐚𝐥 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠 ◾ Developed experimental methods for specific research activities following Australian standards.

𝐑𝐞𝐢𝐧𝐟𝐨𝐫𝐜𝐞𝐝 𝐜𝐨𝐧𝐜𝐫𝐞𝐭𝐞 𝐝𝐞𝐬𝐢𝐠𝐧 𝐜𝐨𝐮𝐫𝐬𝐞 (Mar - Jun 2020, Mar - Jul 2021, Feb - Jul 2022) &𝐒𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐚𝐥 𝐬𝐭𝐞𝐞𝐥 𝐝𝐞𝐬𝐢𝐠𝐧 𝐜𝐨𝐮𝐫𝐬𝐞 (Jul - Dec 2020) ◾ Provided academic consultation services to undergraduate and master's degree students.

𝐏𝐫𝐨𝐣𝐞𝐜𝐭 - 𝐏𝐑𝐄𝐂𝐀𝐒𝐓 𝐌𝐎𝐌𝐄𝐍𝐓-𝐒𝐇𝐄𝐀𝐑 𝐂𝐎𝐍𝐍𝐄𝐂𝐓𝐎𝐑 (𝐂𝐎𝐋𝐔𝐌𝐍 𝐒𝐇𝐎𝐄)𝐏𝐫𝐨𝐣𝐞𝐜𝐭 𝐌𝐚𝐧𝐚𝐠𝐞𝐦𝐞𝐧𝐭 ◾ Estimated project budget. ◾ Developed method statement.𝐒𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐚𝐥 𝐀𝐧𝐚𝐥𝐲𝐬𝐢𝐬 ◾ Analysed flexural and shear test results of column footing assembly. ◾ Determined bending resistance factor, bending stiffness factor, and shear resistance factor for column shoes (i.e. precast beam and precast column connector) following EOTA TR068 guidelines.𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐑𝐞𝐩𝐨𝐫𝐭 𝐖𝐫𝐢𝐭𝐢𝐧𝐠 ◾ Prepared project proposal. ◾ Prepared interim and final reports.

𝐏𝐫𝐨𝐣𝐞𝐜𝐭 - 𝐋𝐎𝐖 𝐂𝐀𝐑𝐁𝐎𝐍 𝐅𝐎𝐎𝐓𝐏𝐑𝐈𝐍𝐓 𝐏𝐑𝐄𝐂𝐀𝐒𝐓 𝐂𝐎𝐍𝐂𝐑𝐄𝐓𝐄 𝐏𝐑𝐎𝐃𝐔𝐂𝐓𝐒 𝐅𝐎𝐑 𝐀𝐍 𝐄𝐍𝐄𝐑𝐆𝐘 𝐄𝐅𝐅𝐈𝐂𝐈𝐄𝐍𝐓 𝐁𝐔𝐈𝐋𝐓 𝐄𝐍𝐕𝐈𝐑𝐎𝐍𝐌𝐄𝐍𝐓𝐏𝐫𝐨𝐣𝐞𝐜𝐭 𝐌𝐚𝐧𝐚𝐠𝐞𝐦𝐞𝐧𝐭 ◾ Estimated project budget for the University of Malaya's work packages. ◾ Liaison with project collaborators. ◾ Site survey for selecting the appropriate location of the Flexi-Arch bridge in the University of Malaya campus and liaison with the administrative officials. ◾ Coordinated research tasks among the researchers. ◾ Finding sources of pozzolans as industrial by-products/wastes in Malaysian industries. ◾ Liaison with Malaysian industries, especially palm oil mills, steel industries, electricity generation industries, and rice mills to get information about industrial by-products/wastes. ◾ Procure industrial by-products/wastes from industries. ◾ Materials and chemicals storage management.𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐑𝐞𝐩𝐨𝐫𝐭 𝐖𝐫𝐢𝐭𝐢𝐧𝐠 ◾ Prepared project proposals in collaboration with collaborators. ◾ Prepared interim and final reports.𝐑𝐞𝐬𝐞𝐚𝐫𝐜𝐡 ◾ Conducted research on palm oil fuel ash, rice husk ash, fly ash, and GGBS. ◾ Investigated material characteristics of raw materials. ◾ Conducted research on developing appropriate geopolymer mortar and concrete mix for precast building products (brick, block) and precast segments of flexi-arch bridge. ◾ Conducted research on developing silica-extraction processes on an industrial scale.𝐑𝐞𝐬𝐞𝐚𝐫𝐜𝐡 𝐑𝐞𝐩𝐨𝐫𝐭 𝐖𝐫𝐢𝐭𝐢𝐧𝐠 ◾ Wrote conference articles.

𝐏𝐫𝐨𝐣𝐞𝐜𝐭 - 𝐆𝐄𝐎𝐏𝐎𝐋𝐘𝐌𝐄𝐑 𝐂𝐎𝐍𝐂𝐑𝐄𝐓𝐄 𝐀𝐍𝐃 𝐂𝐎𝐍𝐒𝐓𝐑𝐔𝐂𝐓𝐈𝐎𝐍 𝐎𝐅 𝐎𝐍𝐄 𝐀𝐍𝐃 𝐇𝐀𝐋𝐅 𝐒𝐓𝐎𝐑𝐄𝐘 𝐆𝐑𝐄𝐄𝐍 𝐇𝐎𝐔𝐒𝐄 𝐔𝐒𝐈𝐍𝐆 𝐆𝐄𝐎𝐏𝐎𝐋𝐘𝐌𝐄𝐑 𝐂𝐎𝐍𝐂𝐑𝐄𝐓𝐄𝐏𝐫𝐨𝐣𝐞𝐜𝐭 𝐌𝐚𝐧𝐚𝐠𝐞𝐦𝐞𝐧𝐭 ◾ Developed construction method statement. ◾ Managed manufacturing of geopolymer lightweight blocks and precast bricks on a large scale for constructing a single-storey building. ◾ Supervised construction work until the foundation level𝐒𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐚𝐥 𝐀𝐧𝐚𝐥𝐲𝐬𝐢𝐬 𝐚𝐧𝐝 𝐃𝐞𝐬𝐢𝐠𝐧 ◾ Prepared building plan ◾ Developed Geopolymer recipe for building blocks𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐑𝐞𝐩𝐨𝐫𝐭 𝐖𝐫𝐢𝐭𝐢𝐧𝐠 ◾ Prepared project proposal. ◾ Prepared interim and final reports.

𝐏𝐫𝐨𝐣𝐞𝐜𝐭 - 𝐃𝐄𝐕𝐄𝐋𝐎𝐏𝐌𝐄𝐍𝐓 𝐎𝐅 𝐂𝐎𝐍𝐂𝐑𝐄𝐓𝐄 𝐁𝐋𝐎𝐂𝐊𝐒 𝐔𝐒𝐈𝐍𝐆 𝐈𝐍𝐂𝐈𝐍𝐄𝐑𝐀𝐓𝐄𝐃 𝐁𝐎𝐓𝐓𝐎𝐌 𝐀𝐒𝐇 𝐀𝐆𝐆𝐑𝐄𝐆𝐀𝐓𝐄 (𝐈𝐁𝐀𝐀) 𝐀𝐒 𝐒𝐀𝐍𝐃 𝐑𝐄𝐏𝐋𝐀𝐂𝐄𝐌𝐄𝐍𝐓 𝐌𝐀𝐓𝐄𝐑𝐈𝐀𝐋◾ Developed recipe of concrete blocks incorporating incinerated bottom ash aggregate◾ Analysed experimental data◾ Prepared technical report

𝐏𝐫𝐨𝐣𝐞𝐜𝐭 - 𝐄𝐗𝐏𝐄𝐑𝐈𝐌𝐄𝐍𝐓𝐀𝐋 𝐈𝐍𝐕𝐄𝐒𝐓𝐈𝐆𝐀𝐓𝐈𝐎𝐍 𝐎𝐍 𝐓𝐇𝐄 𝐀𝐃𝐕𝐀𝐍𝐓𝐀𝐆𝐄 𝐎𝐅 𝐆𝐑𝐀𝐃𝐄 𝟔𝟎𝟎 𝐌𝐏𝐀 𝐃𝐄𝐅𝐎𝐑𝐌𝐄𝐃 𝐑𝐄𝐈𝐍𝐅𝐎𝐑𝐂𝐈𝐍𝐆 𝐁𝐀𝐑 𝐅𝐎𝐑 𝐒𝐓𝐑𝐔𝐂𝐓𝐔𝐑𝐀𝐋 𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐓𝐈𝐎𝐍◾ Investigated flexural performance of beams reinforced using Grade 600 deformed steel

𝐏𝐫𝐨𝐣𝐞𝐜𝐭 - 𝐋𝐎𝐖 𝐂𝐎𝐒𝐓 𝐌𝐎𝐃𝐄𝐋 𝐆𝐑𝐄𝐄𝐍 𝐇𝐎𝐔𝐒𝐄◾ Developed concrete recipe for Low-Cost Model House using waste material◾ Coordinated all project activities including procurement handling manpower, and workmanship◾ Developed architectural plan of single storey house◾ Conducted structural design of whole building◾ Developed construction method statement ◾ Managed construction work and procurement◾ Prepared technical report

◾ Prepared research proposals for numerous projects◾ Research on geopolymer concrete, sustainable waste materials for use in concrete, green building product and technology for low-income housing projects, structural investigation of beams and panels, high-strength reinforcing steel◾ Published research articles and presented research outcomes at the conference◾ Took required actions to keep the progress of the project on track◾ Monitored financial flow and reported to Principal Investigator◾ Managed procurement◾ Coordinated project activities◾ Trained new research assistants◾ Supervised undergraduate students in the research project

𝐏𝐫𝐨𝐣𝐞𝐜𝐭 𝐌𝐚𝐧𝐚𝐠𝐞𝐦𝐞𝐧𝐭 (𝐃𝐞𝐦𝐨𝐥𝐢𝐭𝐢𝐨𝐧 𝐏𝐫𝐨𝐣𝐞𝐜𝐭 𝐚𝐧𝐝 𝐉𝐞𝐭𝐭𝐲 𝐭𝐮𝐫𝐧𝐤𝐞𝐲 𝐏𝐫𝐨𝐣𝐞𝐜𝐭) ◾ Project manager of the high-rise building demolition projects. ◾ Liaison with Government authorities, clients, consultants, utility/service providers and contractors. ◾ Vetted demolition method statements. ◾ Prepared tender documents (Jetty turnkey project)𝐒𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐚𝐥 𝐀𝐧𝐚𝐥𝐲𝐬𝐢𝐬 𝐚𝐧𝐝 𝐃𝐞𝐬𝐢𝐠𝐧 ◾ Designed steel structures: portal frame, truss, steel frame. ◾ Analysed and designed reinforced concrete earth and water retaining structures (swimming pool, water reclamation plant). ◾ Analysed and designed blast-resistant buildings. ◾ Designed prestressed beams, raker piles, and dolphin for a jetty. ◾ Designed foundations: Spread footing, pad footing, raft foundation, raft on pile foundation, driven pile, bored pile, steel pile, steel sheet pile, raker pile, and large foundation (3-meter-deep raft for cooling tower of the gas industry).𝐒𝐢𝐭𝐞 𝐈𝐧𝐯𝐞𝐬𝐭𝐢𝐠𝐚𝐭𝐢𝐨𝐧 ◾ Inspected demolition sites, and underground utility plans before starting demolition of high-rise buildings.

𝐒𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐚𝐥 𝐀𝐧𝐚𝐥𝐲𝐬𝐢𝐬 𝐚𝐧𝐝 𝐃𝐞𝐬𝐢𝐠𝐧 ◾ Analysed and designed steel structures: portal frame, truss, steel frame. ◾ Analysed and designed reinforced concrete earth and water retaining structures (swimming pool, water reclamation plant). ◾ Designed foundations: Spread footing, pad footing.𝐈𝐧𝐟𝐫𝐚𝐬𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐞 𝐃𝐞𝐬𝐢𝐠𝐧 𝐚𝐧𝐝 𝐃𝐞𝐬𝐢𝐠𝐧 𝐂𝐨𝐨𝐫𝐝𝐢𝐧𝐚𝐭𝐢𝐨𝐧 ◾ Partly involved in infrastructure design work: drainage and sewer systems and estimated required sizes of drainage and sewer lines at a new developed area. ◾ Designed drains and culverts.𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐑𝐞𝐩𝐨𝐫𝐭 ◾ Vetted instrumentation monitoring reports of tunnels (Mass Rapid Transport lines).

𝐏𝐫𝐨𝐣𝐞𝐜𝐭 𝐌𝐚𝐧𝐚𝐠𝐞𝐦𝐞𝐧𝐭 ◾ Actively participated in technical meetings with authorities, clients, consultants, utility/ service providers and contractors.𝐒𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐚𝐥 𝐀𝐧𝐚𝐥𝐲𝐬𝐢𝐬 𝐚𝐧𝐝 𝐃𝐞𝐬𝐢𝐠𝐧 ◾ Designed reinforced concrete structures: Up to seven-storey building with a basement for mechanical car parking system, addition, and alteration of existing structures. ◾ Designed steel structures: portal frame, truss, steel frame. ◾ Designed timber, glass, and aluminium structures. ◾ Analysed and designed reinforced concrete earth retaining walls. ◾ Designed foundations: Spread footing, pad footing, raft foundation, raft on pile foundation, driven pile, bored pile, steel pile.𝐁𝐮𝐢𝐥𝐝𝐢𝐧𝐠 𝐒𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐚𝐥 𝐈𝐧𝐬𝐩𝐞𝐜𝐭𝐢𝐨𝐧 𝐚𝐧𝐝 𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐑𝐞𝐩𝐨𝐫𝐭 𝐖𝐫𝐢𝐭𝐢𝐧𝐠 ◾ Conducted structural inspection of residential, commercial, and industrial buildings. ◾ Structural inspection report of residential and industrial buildings.𝐑𝐞𝐬𝐢𝐝𝐞𝐧𝐭 𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐎𝐟𝐟𝐢𝐜𝐞𝐫 ◾ Supervised piling works, retaining wall and building construction works. ◾ Vetted instrumentation monitoring reports.

𝐏𝐫𝐨𝐣𝐞𝐜𝐭 𝐌𝐚𝐧𝐚𝐠𝐞𝐦𝐞𝐧𝐭 (& 𝐒𝐢𝐭𝐞 𝐒𝐮𝐩𝐞𝐫𝐯𝐢𝐬𝐢𝐨𝐧) ◾ Supervised excavation works of diaphragm walls and bored piles, inspected rebar-cage installation, and casting.

𝐏𝐫𝐨𝐣𝐞𝐜𝐭 𝐌𝐚𝐧𝐚𝐠𝐞𝐦𝐞𝐧𝐭 ◾ Coordinated with site engineers engaged in the erection of towers and piling works. ◾ Prepared construction method statements. ◾ Prepared technical and financial documents. ◾ Managed construction documentation.

𝐏𝐫𝐨𝐣𝐞𝐜𝐭 𝐌𝐚𝐧𝐚𝐠𝐞𝐦𝐞𝐧𝐭 (& 𝐒𝐢𝐭𝐞 𝐒𝐮𝐩𝐞𝐫𝐯𝐢𝐬𝐢𝐨𝐧) ◾ Supervised the erection of a steel industrial building structure.