•Holding pioneer post for Inspection planner•Maintaining and driving inspection activities with an average of 95% task compliance and over 2,000 risks mitigated.•Leads and implement lean management principle in executions of tasks which resulted to ~ $350K savings per annum.•Leads, manage and coach/mentor/develop team of front line supervisors, inspectors and technicians•Pioneered the use of the following NDT techniques with Rope Access that resulted to $1M savings- Open Vision + Rope Access for weld seam detection on asbestos line- Open Vision + Rope Access for screening on CUI piping- Open Vision + PMI + Rope Access for weld detection on piping at over 30 meters height piping- Radiography + Rope Access

•Unit Inspector for Fuels and Lubes (27 units) •Responsible, developed, lead, plan and executed Key Inspection Programs i.e. Corrosion Under Pipe Support, Corrosion Under Insulation, Ext Atm Corrosion, High Temp Sulfidation and Napthanic Acid Attack, HTHA, Mix Points & Injection Points, Dead leg Inspection, Small Bore Connection and gusseting, Retro-PMI, Low Silicon in Carbon Steel •Coach/Trainer – safety programs and inspection related topics. Supervised 5 trainee engineers, 8 inspectors, 2 technicians, 1 draftsman •Effective team lead for piping during TA2011/2014 upholding quality, raising up issues to Blk Managers and help in solving them (i.e. coating, pipe support and misaligned piping) •Manage and supervise mechanical resources: Scaffolds, Insulation and 3rd Party Inspection Vendors•Initiatives and Continuous Improvement which resulted to improved work method and efficient use of resources- Designed heat resistant pouch to protect radiographic films during inspection of high temp piping/equipment- Developed inspection database to auto calculate risk and corrosion rates for inspection programs- Developed and uses NDT costing calculation for efficient cost estimates- Pushed for the use of Web deck for pipe rack activities- Initiated the use of DACON CUPS technology for quantitative measurement of remaining thickness under pipe supports.

•Responsible for developing, planning and execution of Key Inspection Programs i.e. High Temp Sulfidation and Napthenic Acid Attack, Retro-PMI and Small Bore Connections.•Task group lead for turnaround (TA 2007, 2009)•Coach/Trainer – safety programs and inspection related topics. Supervised 2 technicians•Manage and supervise mechanical resources: Scaffolds, Insulation and 3rd Party Inspection Vendors•Initiative to include thickness measurement during the retro-PMI program that resulted to approx. $100K savings on execution and identification of thinned down piping.

• Coordinates inspector resources to be deployed to multiple customers facilities• Creates inspection reports

• Performed NDT inspection on aircraft wheels and brakes• Trained Level I personnels• Performed NDT self-audits • Created and maintained an effective NDT documents and equipment data management filing system with periodic review/updates which is beneficial for Quality Control and NDT Audit Activities.• Well versed in maintenance, repair and overhaul as per CMM, customer requirements and/or Honeywell procedures on the following wheels and brakes of the ff: aircraft fleets A300/A310, A330, B727, B737, B747-200/-400, B757, B767, MD11• Trained snd skilled in application of lean management system in production line i.e. TPM, 5S, FIFO, Continuous Improvement, TAT reduction, KanBan• Created Process Checklist for Irridite and Alodine Chemical Treatment • Created Bill of Materials of aircraft wheels and brakes for UPS (B727, B737, B747, B757, MD11) and Air Asia (B737)• Created Process Card/Work Pack for Air Asia aircraft wheels and brakes • Spearheaded the TOTAL PRODUCTIVE MAINTENANCE of testing equipment and production machineries due to thorough familiarity with test equipment capabilities, set-up and calibration and maintenance procedures• Certified Internal Auditor• Assistant Team Leader o Production Planning and Scheduling using SAP system o Reports to team leader and/or Functional leaders regarding production status, updates and issues.

• Certified Level II (IAEA Tecdoc-407 In Penetrant Testing And Magnetic Particle Testing • Well versed in NDT inspection as per CMM, customer requirements and/or ASTM standards on various aircraft fleets such as: B737, DC9, CN235, Dash7, MD helicopters, Sykorsky, Augusta, Beechcraft, Fairchild Dornier• Trainee on Eddy Current Inspection (284 hours) • Trainee on Ultrasonic Inspection (172 hours) • Trainee on Radiographic Inspection and film processing (184 hours)• Well versed in Aircraft Weight and Balance with the in-house licensed engineer on both fixed and rotor wings aircrafts.• Safety leader - observed and implemented safety precautions and practices relative to work and industry.• Trained level I personnels• Buils-up technical support facility such as Inspection Laboratory, Technical Library, etc. critical for the company’s present and future development. • Created and maintained the Technical Library of the company • Created the Inspection Laboratory (Penetrant Post Emulsifiable Line) of the company• Designed and created Tie Bolt holders for PT and MT Process to improve inspection time by 50%