• Maintenance Manager, Biomass Power Plant Cubillos del Sil, LeónAcciona Industrial, O&M OperatorMay 2022 – PresentClient: Forestalia, Fuerzas Energéticas del Sur de Europa I (FESE I)Project description:Biomass power plant 49,5 MW1 x biomass boiler1 x steam turbine Doosan Skoda (50 MW)Woody biomass treatment parkHerbaceous biomass (straw) Storage and Handling Warehouse Key responsibilities: Maintenance of power plant, warranty claims issuing to EPC, subcontractors and vendors management, Maintenance Plan management, spare parts and tools endowment, workshop, and warehouse management. Optimization of intervention tasks at plant equipment, preventive, predictive and corrective maintenance. Relations with local, national and international suppliers. Shutdowns planning, technical problems / breakdown resolutions, and new erections, preparation of reports. Coordination with other departments, Operations, Logistic / Purchasing, Human Resources, Financial, QHSE, development and optimization of CMMS (Maximo).Goals:Production performance optimization Maintaining plant equipment reliability for long-term high availability.Optimization of CMMS (Maximo).Re-certification Audit: UNE-EN ISO 9001:2015 and UNE-EN ISO 14001:2015

• Plant Manager, O&M Long-term Contract Period – ATACAMA CSP, Atacama Desert, Chile, CSP (tower) Thermo-solar 110 MW power plantAcciona Industrial, O&M Consortium (Operador Atacama CSP)June 2019 – April 2022 Client: Cerro DominadorProject description:Thermal solar power plant with flat heliostats sunlight collectors of 110 MW with molten salts thermal storage of 17 hours. Turbine: Doosan Skoda MTD 50 (set) with high and intermediate/low pressure bodiesSolar Field with 10.600 heliostats.Tower receptor height 250 mKey responsibilities: Mobilization period: O&M Staff management, Training program, Spare parts planning, integration of O&M staff into commissioning team. Client contractual relationship. Resources planning.After plant turnover from EPC to Client (Provisional Acceptance): taking responsibilities as O&M Contractor, performing the Operation and Maintenance of the plant, contractual obligations with Client, contractual production performance achievement, Warranties management, subcontractors and vendors management. Cost control.Implementation of corporate strategies, performance monitoring and study of improvements. Relation with local authorities, International HR coordination, economic budget creation and control.Goals: Commissioning and Operation of worldwide first large-scale 110 MW Central Tower thermosolar power plant with 24 h continuous production.Contractual obligations achievement, production performance optimization, staff training, in a safe environmental perspective.Minimizing operational costs.

• O&M Responsible, Defect Liability Period - NOOR 1, Ouarzazate, Morocco, CSP Thermo-solar 160 MW power plant (support until present)Acciona Industrial, NOOR 1 EPC ConsortiumDec. 2015 – May 2019Client: ACWA PowerProject description:Thermal solar power plant with concentrated cylindrical parabolic sunlight collectors of 160 MW with molten salts thermal storage of 4 hours. Turbine: Siemens SST-700 with high and intermediate pressure bodiesSolar Field with 400 loops of thermal oil.Key responsibilities: Plant turnover from EPC to Client. Initial Acceptance Period to Final Acceptance Period. Contractual Client relationship, contractual production performance achievement, remedy of technical defects, to advise and assist the Client in the Operation and Maintenance of the plant. Warranty claims management, subcontractors, and vendors management.Goals: Final Acceptance Certificate achievement. Minimizing technical defects, production performance optimization, Client’s staff training, in a safe environmental perspective. Active participation at Contract arbitration process (International Chamber of Commerce, Paris).

• Site Representative, O&M LTSA Contract - Elektrociepłownia Stalowa Wola, Poland, 450 MW Combined Cycle power plantAbengoa O&MDec. 2014 - Dec. 2015Client : Tauron WytwarzanieProject description :450MW combined-cycle power plant and 240MW of thermal power for District Heating.Turbine: Frame 9F 5-series GE gas turbine.Project not completed due to contractual issues.Key responsibilities: Contractual Client relationship for Turbogroup, LTSA Contract, contractual turbogroup production performance achievement, remedy of technical defects, to advise and assist the Client in the Operation and Maintenance of the Turbogroup.Goals:Minimizing technical defects, Turbogroup production performance optimization, Client’s staff training, in an safe environmental perspective. Cost control during LTSA Contract.

• Maintenance Manager, deputy Plant Manager - Hassi R’Mel, AlgeriaAbengoa O&M, UTE Abener Hassi R’Mel O&MJune 2011 - Dec. 2014 (Support until Dec 2015)Client: Solar Power Plant One (SPP1)Project description:160 MW hybrid power plant (combined cycle and thermo-solar)2 x Siemens SGT-800 gas turbines (50 MW)1 x Siemens SST-900 steam turbine (80 MW)Solar Field with 56 loops of thermal oil.Key responsibilities: Commissioning of the plant, warranty claims issuing to EPC, subcontractors and vendors management, Contract management (Customer and main equipment suppliers). Local staff recruiting, maintenance plan establishment, spare parts and tools endowment, workshop and warehouse implantation and management. Optimization of intervention tasks at plant equipment. Relations with local and international suppliers. Shutdowns planning, technical problems / breakdown resolutions, and new erections. Coordination with several departments, logistic / purchasing, Human Resources, Financial, QHSE, IT, optimization of CMMS (Maximo).Tasks as plant manager:Implementation of corporate strategies, performance monitoring and study of improvements. Relation with local authorities, International HR coordination, economic budget creation and control. Travel arrangements, visas, military escorts, transport, resources at site.Tasks at turbines:- Initial spare parts management, consumables, supply chain.- Contract management, meetings with vendor (Siemens).- Supervision of operating statistics.- Daily maintenance supervision / Relation with resident engineer.- Preventive maintenance supervision during inspections.- Vendor’s planned inspections.Goals:Commissioning and Operation of worldwide first large scale 160 MW hybrid power plant (combined cycle and thermo-solar).Production performance optimization, staff recruiting, training and motivation in a safe environmental perspective. Annual budget cost control. Maintain plant reliability for long-term high availability.

• Mechanical Maintenance Supervisor - Vallesol, San José del Valle, Cádiz, Spain.Torresol Energy O&M April 2011 - June 2011Client: Torresol Energy (Joint Venture Masdar / Mubadala - Sener)Project description:100 MW thermo-solar power plant with molten salts thermal storage of 7 hours.2 x Siemens SST-700 (50 MW).Solar Field with 2 x 93 loops of thermal oil.Key responsibilities: Commissioning of the plant. Responsible of subcontractors’ supervision, subcontractors, and vendors (spare parts management), maintenance plan establishment (mechanical), spare parts and tools endowment. Optimization of capital spare parts to fulfil defined costs. Subcontractors and suppliers’ contracts negotiations.Tasks at turbines:- Initial spare parts management and special tools at site.- Pre-commissioning works.- Routine plan maintenance establishment and daily verifications.Goals:Maintenance plan implementation, optimization of long-term maintenance activities. Maintenance mechanical department cost control. Maintain plant reliability for long-term high availability.

• Mechanical Maintenance Supervisor - 400 MW Combined Cycle power plant, San Roque, Cádiz, Spain.GAS NATURAL SDG (After LTSA with Alstom, Gas Natural acquired Alstom’s staff)June 2010 - Sep. 2010ALSTOM POWERFeb 2009 - June 2010Client: GAS NATURAL SDG / ENDESA GeneraciónProject description:2 x 400 MW combined cycle power plant.2 x Alstom KA-26B gas turbines + 2 x Alstom Steam turbines.Key responsibilities: Responsible of subcontractors’ supervision, for corrective, preventive, and predictive, maintenance tasks, at power train (single shaft), HRSG, main equipment and BOP. Direct participation in high impact works. Records with specific software (Appi Pro / OCEN CMMS / Brüel & Kjær vibrations analysis). External specific machinery technicians’ assistance during plant works. Management and supervision of external work teams during plant shutdowns. Mechanical Maintenance documentation management, reviewing of established work instructions and procedures. Planning of daily and routine works, mechanical department cost control, spare parts, stock forecast, and contact with suppliers, tools endowment improvement. Support to other Alstom’s activities at other sites. Tasks at turbines:- Commissioning, Radial Rotor Position Measurement at gas turbine, in Modugno, 2x400 MW CC Power Plant, Bari (Italy).- Gas Turbine Inspections (Outages) in Cartagena, 3x400 MW CC Power Plant, Murcia (Spain).- Support to qualified gas turbines supervisors from Alstom Switzerland, and Alstom Field Service Spain, for outage works.- Supervision of external teams during gas turbine inspections, in San Roque CC Power plant, Cádiz (Spain).Goals:Optimization of long-term maintenance activities. Maintenance mechanical department cost control. Maintain high plant reliability for long-term availability. Acquiring experience in gas and steam turbines activities, HRSG and other equipment of combined cycle power plant.

• Mechanical Maintenance Technician - PET plant, San Roque, Cádiz, Spain.Eastman Chemical Iberia SpainSep. 2010 - Dec 2010Nov. 1998 - Feb. 2009Client: Eastman Chemical CompanyProject description:175.000 Ton / year PET (polyethylene Terephthalate) polymer chemical plant.Key responsibilities: General maintenance of the plant (mechanical, support to electrical and I&C). Responsible of subcontractors’ supervision. Records with specific software (SAP CMMS). External specific machinery qualified technicians’ assistance during plant works. Management and supervision of external work teams during plant shutdowns. Documentation management, reviewing of established work instructions and procedures. Planning of daily and routine works, spare parts, stock forecast, and contact with suppliers, tools endowment. Support to warehouse management.Commissioning of new CHDM chemical plant (sub-product of chemical process) In San Roque, Cádiz, Spain.PET plant shutdown support in Europort, Rotterdam, The Netherlands.Goals:Optimization of long-term maintenance activities. Maintain plant reliability for long-term high availability. Acquiring experience in general process machinery.

• Refrigeration and HVAC Service Engineer – Gibraltar, UK.Cold Aire Engineering, LTDFeb 1996 - Nov 1998Client: Industrial, commercial, and residential CustomersProject description:Refrigeration plants.Buildings, domestic and commercial HVAC.Central intelligent air conditioning installations.Cooled water chillers plants.Key responsibilities: Refrigeration and HVAC technical service. Preventive and corrective maintenance. New installations. Spare parts and consumables management. Customers’ contracts management.Goals:Customer service orientation. Acquiring experience in installation and maintenance of refrigeration, air conditioning and ventilation equipment.

• Electro-Mechanical Technician. Erection, commissioning, and maintenance – Gibraltar oil refinery, San Roque, and Steel Factory, Los Barrios, Cádiz, Spain.Cepsa oil refinery / Acerinox steel factory. Different subcontractors companiesJune 1989 - May 1995 (Intermittent, in parallel with Education)Client : CEPSA / ACERINOXProject description :12 M ton / year Oil Refinery. Steel Factory 1 M ton / year.Lubricants blending and automatic filling plants.Petrochemical plants.Co-generation plants.Petroleum derivate plants.Steel Factory. Melting, Hot and Cold Rolling, Finishing plants.Key responsibilities: Erection and maintenance works at oil refinery / steel factory complexes. Metal works at refinery equipment, processing units’ shutdowns works, storage tanks and piping, heat exchangers, new installations. Electro-mechanical maintenance at automatized lubricants filling plant.Goals:Acquiring experience in general industry process equipment, erection, and maintenance works.