Jacob Drexel Email & Phone Number

Sunnyvale, Ca, Us

Aberdeen, Gb

• Ensure compliance with plans, specifications, schedules, and cost estimates.• Manage contractors/subcontractors within assigned area of responsibility• Control project schedule and cost by efficiently managing construction resources.• Monitor productivity and cost, taking appropriate action to maintain maximum labor productivity and cost-effectiveness.

Aberdeen, Gb

Collaborate with the Project Manager to develop the comprehensive project management plan (PMP), encompassing project scope, procurement, environmental considerations, time management, finances, quality management, safety, and risk management.Manage field operations, overseeing project success in terms of profitability, safety, schedule adherence, quality, and customer satisfaction.Conduct weekly coordination meetings with project teams and subcontractors, facilitating effective communication and problem-solving.Prepare daily field status reports, documenting project progress and identifying potential issues.Coordinated the resolution of constructability issues, design conflicts, and clarifications in collaboration with relevant personnel.Develop and managed the construction plan to ensure successful project execution.Ensure adherence to contract terms and conditions while maximizing profitability.Proactively prevent and address claims by identifying, quantifying, documenting, and mitigating/resolving potential issues in a timely manner.Provide leadership and guidance to project team members and subcontractors, ensuring a high level of performance and adherence to project objectives.Support Project Managers and Construction Managers in developing the overall project schedule.

Sligo, Ie

Execution of commissioning activities on mechanical equipment and systems.Systems / Plant include: Industrial chilled and hot water systems, process cooling water, exhaust systems, and compressed air systems, including boilers, chillers, cooling towers, air handlers, roof top units, air compressors, fans, and motors.Coordinates the LO/TO of equipment during startup and ensures work is performed in a safe manner consistent with work practices and quality standards.Development of individual mechanical system specific commissioning and start up procedures in line with design intent, construction-specific drawings, submittals, specifications, sequence of operations and process & system integration.Review of contractor testing procedures, reports, and testing activities for all project disciplines to all code and regulative testing and verification requirements.Mechanical System walk-downs, installation verification to requirements of all drawings, P&ID’s, specifications, submittals, specific system and legislative prerequisites with any deficiencies, errors or corrective actions required being notified to the construction team via field work reporting and punch list generation.Preparation and field execution of startup checks, including responsibility for verifying that the startup documents have been fully executed and signed off.Field execution of functional acceptance testing (FAT), verification of the operation and integration of all individual mechanical system components as part of a fully functional controlled system as per design intent.Review design drawings and specifications to ensure all equipment has been installed correctly and meets the owners project requirements.

Dallas, Tx, Us

Lead and supervise the TGM maintenance programCoordinate/Document system upgrades and modifications with equipment manufacturersInitiate and investigate QIR qualifying eventsLead 5-Why type investigations into negative occurrencesAssist in incident investigation and reviews regarding TGM related equipmentPropose and plan TGM system modificationsPublish TGCM system work plans for non-standard work.Increase the knowledge of the TGCM team members through formal and informal on-the-job or classroom training.Increase team flexibility through cross-training of technicians.Create and update TGM Operations and Maintenance related procedures and processesAttend customer meetings regarding TGCM equipment and operations.Ensure TGCM PM compliance by utilizing maintenance management systemOversee temporary change notice process for TGCM related equipmentRead and understand system P&IDs, Electrical Schematics, and PFDsMaintain an understanding of Engineering, Design, and Manufacturing TerminologyTroubleshoot, diagnose, and repair or recommend repairs for faulted equipment and components

Paris, Fr

Provide various presentations to customers and Air Liquide personnel detailing any and all field service data or information.Provides 24-hour support to the high purity nitrogen production plant, liquid bulk, and high purity gas delivery systemsRepair equipment such as compressors, valves, pumps, cooling towers, water treatment, analyzers, and some electronic devices.Select the most appropriate equipment for a customer's specific application and circumstancesCoordinates installation, facilitation, and start-up of said equipment.Perform the functional testing of said equipment prior to customer acceptance.Provide warranty coverage and assistance for installed equipment.Perform advanced gas troubleshooting and repair of delivery equipment.Maintain and operate specialty gas delivery equipment such as bulk tanks, analyzers, monitoring equipment.Maintain historical records of equipment maintenance and/or repair.Assist in the identification and resolution of gas related semiconductor-manufacturing problems.Assist in drafting specifications for operating procedures/work instructions and revise existing procedures as required for the various pieces of equipment at each location.Generate site-specific reports and consolidate data as appropriate Facilitate all customer and Air Liquide programs including, but not limited to: Safety, Training, Operations, and Preventive Maintenance.Comply with all applicable HS&E Standards including, but not limited to: PPE, Forklift Operations, Lock Out/Tag Out Program, Confined Space Entry, etc.Provide site information to local sales force to identify potential opportunities for Air Liquide.

Paris, Fr

Lead TGCMS operations daily activities.Responsible as initial escalation and primary point of contact for shift operations personnel. Makes appropriate notifications when necessary.Ensures completions of Task/PM items assigned to their operational shift.Mentors junior technicians and supervises daily activities to ensure compliance with SOP and work instructions, as well as, all Air Liquide and customer protocols.Provide initial SCADA alarm response. Ensures continuity of supply to the customer.Identifies deviations and reports them to maintenance team for the respective area. Ensures that preventive and corrective actions are taken to closure.Assigns work orders to maintenance crews.Creates work orders in CMMS(Maximo) as necessary for unscheduled maintenance.Ensure timely and accurate response to fab special requests/deliveries.Provide information for and initiate proper reporting procedures per on-site policies including, but not limited to: Quality Incident Reports, product acceptance, tank fill, inventory and material usage, monitoring, safety parameters, and personnel requirements.Assist in the identification and resolution of gas/chemical related semiconductor-manufacturing problems.Assists in investigations into any Safety Near Miss, Recordable or Lost Time incidents.Develops and updates operational procedures (SOP & WI) for TGCM operations activities.Ensure adherence to established work instructions and performance standards for personnel in their charge.Attends customer meetingsAssists in investigations into any Safety Near Miss, Recordable or Lost Time incidents.Acts as primary point of contact and escalation for personnel on their shift.Investigate equipment issues, escalate if necessary.Generate activity data for site-specific reports and consolidate data as requested by Management.Train and Qualify new technicians. Re-train and re-qualify as neededAssist in maintaining a current task analysis

Paris, Fr

Daily operation of Water Treatment Plant.Complete WTP Operations Checklist once per shift.Collect internal and external plant samples at the beginning of each shift from all process units within WTP for process control monitoring for in-house lab analysis of all required parameters. Perform minor preventive maintenance functions such as equipment lubrication, cleaning, replacement of belts, replacement of dust filters, hoses, painting and other maintenance tasks.Monitoring weather, storm water flows and basin levels and coordination with Facility Specialist for stormwater management pump rental needs.Ordering lab supplies and equipment.Regular housekeeping of lab and treatment plant.

Stamford, Ct, Us

Successfully sold TWC products and services to achieve monthly revenue and sales quotas in Video, Data, Phone and Intelligent Home through proactive consultative needs analysis with new and existing customers including development of client-centric product solutions. Attempted to sell on every call regardless of the customer s initial reason for calling, such as billing calls, service calls and complaint calls.Enhanced the client experience by speaking with customers via telephone to provide information about products or services, enter orders, and transfer services. Served as expert and educator to customers on all TWC products, services and packages along with competitor s offerings.Navigated and used various databases and applications to accurately and quickly capture, maintain and retrieve records of customer transactions, inquiries, complaints, or comments, as well as actions taken. Maintained call and data entry accuracy levels that meet department expectations.Applied appropriate techniques and demonstrate sustained achievement of sales goalsMaintained strong working knowledge of cable products and services to include video, data and voiceUtilized appropriate software applications to include billing system and other role-related toolsAbility to prioritize and organize effectivelyAbility to show judgment and initiative and to accomplish job duties

Glens Falls, Ny, Us

Assisted RN with rounding on patients at Triage to communicate to both patients and family members information regarding delays, treatments, etc Assisted the RN to complete portions of the initial assessment according to established protocol, i.e. vital signs and visual acuity. Identified life-threatening situations based on ACLS standards. Performed point of care testing for blood glucose monitoring, HCG, and urine dipsticks. Performed 12 lead EKG and gives print-out to physician. Assisted with admitting and discharging patients according to department policy and under the direction of an RN. Applied all types of dressing bandages, steri-strips, splints and other orthopedic devices.Assisted with medical records, admissions, transfers, discharge/death, transcribing selected physician orders, supplies, equipment and unit recordsOverall role assumed the duties of EKG tech, Phlebotomist, Unit Secretary and Patient Care Assistant

Uncovered new businesses by engaging with clients via telephone, email and their homes and commercial sites. Nurtured existing relationships by offering solutions and solving problems for diverse shipping needs.Responsible for the day-to-day account management and operations of accounts.Researched target companies to identify potential contracts.Responded promptly and enthusiastically to phone and email requests for information and pricing.Confirmed interest in bidding and deliver quotes on time with an email cover letter that is pleasant and professional.Reviewed plans and specs and provide a quote/proposal for the customer.Obtained volume discounts on larger jobs from the manufacturer if applicable.Followed-up on delivered quotes with phone calls and email.Ordered material for the job upon customer order and purchase order approval.Participated with co-workers in the placing of material orders for inventory to insure accuracy.Confirmed accuracy of orders with one other team member.Coordinated delivery of material with warehouse personnel. Collaborated with internal staff to ensure world class customer service on every shipment/delivery.Billed all delivered materials promptly.Kept accurate files of bids, orders, deliveries, billings and payments.Updated pricing regularly to reflect increases received from manufacturers.Maintained an accurate and up to date inventory.Monitored receivable of assigned accounts and provide collection follow-up if required.Properly priced and detail scope of work on the door installation quotes.Processed material and service invoices

Bachelor Of Business Administration - Bba, Project Management

Associate'S Degree, Math And Science