Jacob Greenfield Email & Phone Number

Jenks, Oklahoma, United States

Cathodic protection consulting providing services for design, engineering, troubleshooting and construction.+Asset Integrity Program Management support with creation of automated KPI's.+Advanced troubleshooting for CP and stray current issues.

Jenks, Ok

+Managed 500+ projects valued at $0.05MM to $3.50MM with annual revenues up to $21.00MM, oversaw dynamic project teams comprised of 65 members, and ensured on-time and on-budget completion.+Expanded client base internationally by providing expert level advice with turnkey solutions.+Served as SME to 20+ client accounts for project management, cathodic protection, AC mitigation, construction, troubleshooting, data processing, data management, and financial management.+Designed, developed and implemented CP design calculations and reporting standards, supporting projects from 1 mile to 2,100 miles.+Communicated with diverse teams, building rapport and long-term relationships, and achieving excellent customer satisfaction.+Identified process improvement opportunities to enhance operational effectiveness and improve team productivity, resulting in 75% reduction in overhead work hours.+Demonstrated ability to build and maintain strong relationships with internal and external stakeholders.

Jenks, Ok

+Managed 200+ projects valued at $0.05MM to $2.00MM with annual revenues up to $15.00MM, oversaw project teams comprised of 40 members, and ensured on-time and on-budget completion.+Managed employees, procurement, inspection, AC Mitigation and CP design/installations for 3,000+ miles of pipeline build out including facilities.+Prepared cost estimates, scheduled project tasks, allocated resources to team members, overseeing a team of project managers, and monitoring projects to ensure they are completed on time and within budget.+Served as SME to 5+ client accounts for project management, cathodic protection, AC mitigation, troubleshooting, data processing, data management, and financial management.+Prepared accurate budgets based on careful review of project goals, materials, and labor resources.+Drove initiatives to automate manual processes for data management to reduce work hours.+Spearheaded new safety initiatives to change the safety culture, resulting in ZERO safety recordable incidents during entire tenure.+Built strong relationships with clients, vendors, and contractor stakeholders.

Tulsa, Oklahoma Area

+Managed 50+ projects with annual revenues of $6.00MM, oversaw project teams comprised of 15 members, and ensured on-time and on-budget completion.+Managed a team of inspection personnel, ensuring the highest quality of service and safety standards were achieved.+Conducted cathodic protection surveys on pipelines and terminals, including data interpretation and deliverable production.+Designed, estimated, and installed cathodic protection and AC mitigation systems, performing all roles through the project.+Provided pipeline integrity consultation with reference to PHMSA guidelines as a member of the Asset Integrity team for two clients.+Developed and trained team on testing procedures to accomplish objectives. Maintained a perfect safety record.+Monitored and reviewed the performance of the inspection team, providing coaching and training where necessary.+Developed and implemented quality assurance procedures to ensure accuracy of inspection resultsManaged and tracked the budget and resources to ensure efficient delivery of services.

Tulsa, Oklahoma Area

+ECDA: performed all tasks associated with indirect assessment field testing including CIS, DCVG, ACVG, AC Current Attenuation, Soil Resistivity, and all areas of direct examination. Provided recommendations to client in reference to Part 192.933.+ICDA: Selected ICDA locations and managed dig scheduling with clients. Coordinated inspectors and trained on how to perform ICDA inspections and what NDT crews needed to inspect. Instructed clients on installation of internal corrosion coupons and locations to install coupons.+ECDA mitigation: reviewed data and coordinated testing efforts to mitigate low potentials. Performed current requirement and recommended new ground bed and rectifier locations. If additional CP current could not be provided, recommended recoat locations. Performed quality control on all inspections performed. +Influence/Interference Testing: After reviewing ECDA data, identified areas of concerns and coordinated additional testing methods. After additional field testing was performed, if influence was found to be interference, made recommendations to mitigate interference. Provided pipe inspection and project inspection during installation of mag bank installation. +AC Interference: Collected all parameters in the field to design AC mitigation systems. Processed all data and collected information from power line companies. Designed AC mitigation systems with Zinc Ribbon installations. Instructed clients on areas to be installed, products to use, and provided management for the installation. Performed final field testing after AC mitigation system was installed to prove AC voltages were at a safe level.+Provide pipeline integrity consultation with reference to PHMSA guidelines. Assist clients during IMP, dig selection meetings, and risk assessment meetings. Write procedures and train employees to perform the testing according to procedures to verify safe and thorough work is performed.

+Worked as a NACE CP-1 Certified, Direct Examination Technician performing the following tasks: Magnetic Particle Testing, Ultra Sonic Testing, Visual Inspection, Photographing, Coating Inspection including Application and Removal, Soil Resistivity, Pipe-To-Soil Potentials, Soil PH, MIC Testing, Post Media Blasting Anchor Profile, Pit and Crack Depth Gauging, Current Attenuation, and PCM A-Frame ACVG Testing for possible shorted casings.+Installed repairs on pipelines using non-metallic means.+Processed GIS and USA information to find and locate sites for excavation.+Processed data for each excavation and submitted reports to clients. Required an extensive knowledge of Microsoft Office to properly communicate and present all reports.+Worked as a direct assistant to the construction Superintendent with scheduling of jobs, locating excavation sites, contacting and scheduling standby personnel from clients, processing daily paperwork, safety, and daily planning.

+Worked with direct involvement in the following surveys: DCVG, ACVG, CIS, Influence Testing, ECDA Projects, and AC Current Attenuation.+Skilled in the operation and programming of: Trimble GPS data loggers, DL1 data loggers, ICISS CIS meters, Leads and Pipe Camp DCVG meters, SESCO Interrupters, PCM, and inductive and conductive locators.+Worked and held a Crew Leader position on an Electrical Towers Project performing the following tasks: Coating Thickness Gauging, GPS, Pipe-To-Soil Potentials, pH and ORP Data, Corrosion and Imbalance Readings, and Soil Resistivity. Was responsible for all data reporting, training, equipment maintenance, and safety.+Held morning Safety Meetings with training, mentioning hazards that can come about on the job site, and how to prevent hazardous situations.+Trained to troubleshoot and repair rectifiers.

+Worked with direct involvement in the following surveys: DCVG, SCCDA (including soil modeling), CIS, Annual, Sphere of Influence, and Distribution.+Skilled in the operation and programming of: Trimble GPS data loggers, DL1 data loggers, Allegro CIS meters, DCVG meters, Interrupters, PCM and locators.+Technically skilled to trouble shoot computer problems, reprogram any meters/data logger units and install valuable software for the completion of surveys.+Fieldwork experience: installation of portable rectifiers, connecting locator/PCM transmitters, DCVG and CIS reading, GPS mapping, pipe to soil reading, setting up interrupters, installing drivable anodes, and adjusting rectifiers.

+Analyzed weekly sales reports and created a plan of action based on extrapolated data.+Directed and trained an Assistant Manager and oversaw the talent development and task completion of 10+.+Maintained weekly work schedules.+Excellently maintained expert knowledge in each product within department.+Supervised customer relations within department.+Directly managed all inventory and personnel needs required to run day to day business successfully.+Member on the store safety committee.