AeroLeads people directory · profile
James Joseph Email & Phone Number
Chemical Engineer (Process and Pilot Plant Development)
at
Seloxium
LinkedIn matched
✓ Verified August 2026
3 data sources
Profile completeness 86%
Current company
Role
Chemical Engineer (Process and Pilot Plant Development)
Location
Lagos State, Nigeria
Company size
Who is James Joseph? Overview
A concise factual answer block for searchers comparing this professional profile.
Quick answer
James Joseph is listed as Chemical Engineer (Process and Pilot Plant Development) at Seloxium, a with 20 employees, based in Lagos State, Nigeria. AeroLeads shows a matched LinkedIn profile for James Joseph.
James Joseph previously worked as Lead Process/Automation Engineer at Basf and Senior Petroleum/Process Engineer at Dangote Petroleum & Petrochemicals. James Joseph holds Master Of Business Administration - Mba, Business Financing And Investments, In Progress from Ahmadu Bello University.
Company email context
Email format at Seloxium
This section adds company-level context without repeating James Joseph's masked contact details.
Seloxium
Review company-level records connected to James Joseph before choosing the right outreach path.
Profile bio
About James Joseph
A dedicated Engineer with an illustrious decade of Engineering experience in the areas of Process Engineering, Process Instrumentation Control and Automation Engineering, Petroleum Engineering, and Engineering Commissioning. I have acquired quality experiences ranging across - Project Management (Engineering, Construction, Commissioning), Process operations, production control, Well Testing, Reservoir Sampling and Analyses, Raw water treatment, Captive Power generation, Gas Treatment, Cryogenics, Hydrogen Generation etc. - Development and Review of FEED & EPC Documents, ICSS control philosophy, Safety Logic, Hardware Architecture, Cause & Effect Diagrams, Document markup, P&ID Diagrams. - Technical Review of Project’s Constructability, Maintainability, Cost Management & Human Capital Skill requirement - Project’s Technical Design Reviews, FAT, SAT, Pre-commissioning-I/O loop checks, Commissioning, Exemption & Modification Orders, P&ID markup, Project documentation, Technical Reporting and parts procurement - Coordination of Risk Assessment (HAZOP/SIL), Incident Investigation and HSE Compliance towards safe job delivery. - Implementation of maintenance philosophies for Preventive, Corrective, Scheduled and Turnaround maintenance - DCS and PLC Operations for Process control, Operation & Maintenance of Instruments, SIS design and implementation, Rotating Equipment, Sensors and Actuators, Control Valves, and Electrical Control Systems troubleshooting I am great at solving complex problems, I understand what it means to lead and to follow.Completed projects- Commissioned the Process Utilities Plant (STG, Water treatment, Steam generation, Air compression, N2, CW, BFW production units etc) at DFL 3 million tonnes plant.- Process Commissioning Engineer for RFCC at the 650KBPSD Dangote Oil Refinery.- Commissioned the BASF P1000 Chemcycling Plant - Commissioned BASF Mechanical recycling unit as Engineering Lead.My Top Knowledge Areas and Skills;1. Process Engineering2. Design expertise3. Engineering standards ISO, ASME, API4. Project execution5. Operating procedures6. Refining knowledge7. Process optimization8. Engineering analysis9. Process modeling10. Heat & material balance11. Material selection12. P&ID development13. Equipment sizing14. Instrumentation specification15. Simulations & calculations16. Project support17. HAZOP Studies18. PLC/DCS/SCADA operations19. Chemical Engineering20. Process design methods21. Oil & Gas Processing22. Ethylene/Petrochemicals Production23. Nitrogen Production/Cryogenics
Current workplace
James Joseph's current company
Company context helps verify the profile and gives searchers a useful next step.
Seloxium
9 roles
James Joseph work experience
A career timeline built from the work history available for this profile.
Lead Process/Automation Engineer
Current* Engineering Lead for all ChemCycling Projects in West Africa.* Led the Successful Commissioning of the P1000 Pyrolysis Plant and the Polystyrene Densifier Plant.* Conducted SIS evaluations, specified SIL levels based on risk class, specified needed SIFs for some failure cases. * Successfully conducted HAZOPs, SHE analysis and PHA reviews to pass for production approval.* Developed and Modified P and ID design and reviews, Process Design and implementation for the W2C unit and its product storage section.* Leading the Process Automations and management in the Chemcycling department.* Applied foundational Understanding of Industry codes and Standards (ATEX, ISO, API and ASME).* Developed Several E&I philosophy for safe operations of different units and their adjoining systems.* Carried out PLC (S71500 series) troubleshooting and rewiring according to best practices and as specified by OEM.* Supervised the sizing, installation, servicing and maintenance of sensors, actuators, solenoids, rotating equipment such as pumps and compressors, drives. fire suppression devices FM200, extractors etc.* Continuously Monitoring Project Performance and Implemented MOC for improvements.* Developed Production Plan and monitoring the implementation for various sites.* Provided Engineering Support across different BUs e.g. BASF Catalyst Inert loading supervision at the Marine XII LNG Congo project for the catalyst division. etc.* Asset Manager for the W2C sites.
Jun 2022 - Present
Senior Petroleum/Process Engineer
- Provided Technical Support in the RFCC commissioning Team.- Co-developed the FCC catalyst selection and management plan.- Seconded to The fertilizer plant (DFL) for Process Engineering Support by management.- Successfully Led the Installation of the Reverse Osmosis unit at The raw water treatment plant.- One of the Pioneer Engineers at the Utilities control center for DFL- Managed continuous operations and data management as DCS in charge for Utilities at DFL.- Collaborated with OEM on the installation of the 3 * 42MW STGs and its peripherals. Tested the Bentley Nevada systems and jointly developed SOPs for STG operations.- Conducted Trouble shooting for DM Plant control system, PLC and PID tuning.- Successfully commissioned the Nitrogen Generation Unit, Pioneer engineer Developing the SOP.- Co-Supervised in the installation of CW System, the ID fans, Risers and 6* 4MW motors (5W, 1S)- Co-supervised the construction and installation of the 3* 200T/H Side fired Boilers , tested and validated the Boiler Management System and commissioned the lines after many rounds of steam blowing through the target plate method.- Co led the installation of the Compressed Air network and the Smokeless Flare System.
Jan 2020 - Jun 2022
Refinery Process Engineer
Refinery Operations, maintenance and control. RFCC. Engineering Utilities Support (STG, Boiler, RWTP) for the Dangote Fertilizer BU. all cycles from FEED to construction, commissioning and Operations
May 2017 - Dec 2019
Trainee Process Engineer
Process Engineering, Analyses and Control, FCC unit, CCU unit, Process Efficiency Analysis, DCS operations, process support for commissioning, Start-up, Ramp-up & Shutdown.
Sep 2017 - Feb 2018
Apr 2015 - May 2016
Well Testing Engineer
Reservoir Fluid Sampling and Analysis, also a coverage of DST/TCP, Surface well testing and equipment for well control, and subsea engineering; Basic practices involved in well testing...
Feb 2013 - Jan 2014
Water Drilling Trainee Engineer
Thunderway Borehole Drilling Services
Feb 2011 - Nov 2012
Automotive Technician
Unity Brothers Automobile Services
Mar 2011 - Nov 2011
5 education records
James Joseph education
Master Of Business Administration - Mba, Business Financing And Investments, In Progress
Master Of Process Engineering (Mpe), Chemical Engineering
Bachelor Of Science, Bsc., Petroleum Engineering
Diploma (Nptel/Alison), Mechatronics
Course, Systems Engineering
FAQ
Frequently asked questions about James Joseph
Quick answers generated from the profile data available on this page.
What company does James Joseph work for?
James Joseph works for Seloxium.
What is James Joseph's role at Seloxium?
James Joseph is listed as Chemical Engineer (Process and Pilot Plant Development) at Seloxium.
Where is James Joseph based?
James Joseph is based in Lagos State, Nigeria while working with Seloxium.
What companies has James Joseph worked for?
James Joseph has worked for Seloxium, Basf, Dangote Petroleum & Petrochemicals, Bharat Petroleum Corporation Limited, and National Youth Service Corps.
How can I contact James Joseph?
You can use AeroLeads to view verified contact signals for James Joseph at Seloxium, including work email, phone, and LinkedIn data when available.
What schools did James Joseph attend?
James Joseph holds Master Of Business Administration - Mba, Business Financing And Investments, In Progress from Ahmadu Bello University.
Find 750M verified contacts
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trialPeople with similar names
Check these profiles if this is not the James Joseph you were looking for.
View similar profiles
