Jignesh Patel Email & Phone Number

Kochi, Kl, In

Kochi, Kerala, India

• Performing preventative and corrective maintenance on various manufacturing Instrumentation transmitters, Analysers, control valves, metering skids, fire and gas systems, ESD systems, DCS systems on air products ASU Unit, Hyco 1&2 Plant and syngas plant, • Working on Siemens PCS 7 DCS System with Siemens S7 410H Controllers and S7 400 PLC system supporting with wincc Programming system.• During Kawasaki GTG shutdown performing Gas turbine bently Nevada vibration and temperature system job • Good knowledge of servomex, Teledyne, Co, NOx, O2, CO2 analysers, and Familiar with siemens Gas chromatogram system,• Troubleshoot and preventive maintenance job of PSA product SICK Co, CO2 analysers, • H2 and N2 metering skid micromotion mass flow transmitters verification job, • Calibration of smart Transmitter for Pressure, DPT, Temperature, LT of reputable manufacturers such as Rosemount, magnetroll using HART protocol (475).• Preventive maintenance and Troubleshooting of UV/IR Flame Detectors, Smoke Detectors, Heat Detector, fire and gas detectors and Manual call point,

Doha, Qatar

• Perform Instrumentation preventative maintenance on various manufacturing equipment, PLCs, control networks, DCS system, • Understanding of networks including Ethernet, Modbus, ProfiBus, • Gained Experience in Calibration of smart Transmitter for Pressure, Differential pressure, Temperature, Level Measurement of reputable manufacturers such as Rosemount (Model 3051 C), Honeywell (300 Series). Familiar with use and application of communicators using HART protocol (475).• Perform hardware and software integration and configure system instrument databases, control system custom HMI graphics and reports utilizing Emerson delta V DCS System, Allen Bradley/Rockwell PLC-5 and ControlLogix, process control networks including Universal Control Network, Ethernet, Local Control Networks, and relational databases, • Provide hands-on technical leadership for installation, start-up, and maintenance of state-of-the-art process control systems, • Tested, calibrated, and documented results for a wide variety of smart electronic and pneumatic instruments. (Rosemount, Honeywell, Endess+Hauser, Fisher, Yokogawa etc.) for the measurement of Pressure, Differential Pressure, Flow, Temperature, Level, and Interface Level,• Checking and Troubleshooting of UV/IR Flame Detectors, Smoke Detectors, Heat Detector, fire and gas detectors and MCP (make- Detronics, Honeywell, Gent, dragger,).

Doha, Qatar

• Carried out Activities Preventive maintenance (PM), Corrective maintenance (CM) of field instruments and subsystems as per maintenance procedures. • Troubleshooting & Servicing of Rotork (MOV) IQ actuator. • Worked for different type of Analytical Instrument, Carried out PM Job of Analyzer of mass spectrometer and gas chromatography (Honeywell GC 8000), Rosemount oximeter 4000. • Working on DCS systems Honeywell PKS/Experion C300/C200 Controllers, • Studied in the maintenance and troubleshooting of DCS,ESD and F&G systems, • Familiar with Program logic control of Triconex for ESD and Fire & Gas system (FSC). • Bentley Nevada vibration and temperature-monitoring systems (3500 series) probe installation and Calibration of probes and Monitors with TK3e. • Maintenance of Recycle Gas Compressor Bently Nevada 3500 axial, redial and keyphasor vibration probe Adjustment During Compressor Shutdown. • Assist Safety personnel to carry out periodic tests on the Fire and Gas, deluge system, Rim Seal system including the Gas detectors, flame and smoke sensors etc. • Update, maintain records, generate reports related to the maintenance work, maintain log book, maintain master list of drawings, calibrate/test tools and test equipment, in order to enable the management to take the right decisions and thereby ensure plant reliability.• Calibration and Configuration of SMART Transmitter’s (Pressure, flow, level, Temp.) and control valves using HART Communicators. • Maintenance of utility Nitrogen and Air compressor (Atlas Copco.)• Knowledge of P& ID diagrams, PFD, logic and loop drawings, C&E, plant Inst. location drawing, wiring diagram, cable schedules, Inter-connection Drawing., Hook-up drawing, data-sheet review, instrument index etc. • Supervise and monitor the progress of all types of routine, breakdown and planned maintenance activities, so as to minimize down time for the equipment for increased plant productivity.

Halul Island,Qatar

• Facilitate loop checking, Functional testing, Logic testing & interlock verification turbine.(DCS – GE MARK VIe)• Testing & Commissioning of Logic and Interlocks,• Troubleshooting of Instrumentation & Control related issues during cold, warm to hot start-up and turbine rolling and loading.• Functional testing and verification of on/off MOV’s( Rotork) & control valves (Masoneilan, Fisher)• Provide support for Sub-contractors of scope and the responsibilities for pre-commissioning and commissioning activities,• Provide and submit DCS spare parts lists to the Lead Commissioning Engineer.• Identification of systems and sub-systems by marking up of PFD’s and PID’s system definition• Start-up coverage support until unit stabilized.• Provide guidelines/rules/regulations regarding the use and/or access to the DCS and associated equipment,• Conducts analysis and performs troubleshooting during commissioning on the hardware of the process control system in coordination with I&C Technicians and EPC/Commissioning team. • Assisting the operation authority in plant start up Calibration, trouble shooting of process field instruments like pneumatic, electronic and smart instruments including F&G instruments like flammable gas detectors, Toxic gas detectors, Smoke detectors, Deluge systems etc. • Knowledgeable of DCS control system operation, charts and configuration, PLC operation/programming, instrument control device settings and calibrations, reading and interpreting circuit and process and instrumentation diagrams, etc.• Various types of Conventional Fire Alarm System like Smoke Detection, Heat Detection.• Coordinate with construction department by defining of priority systems according with overall construction and pre-commissioning & commissioning plan and schedule.

Bahrain

• Carried out Preventive, Break down maintenance of field instruments and subsystems as per maintenance procedures. • Gained Experience in Calibration of smart Transmitter for Pressure, Differential pressure, Temperature, Level Measurement of reputable manufacturers such as Rosemount (Model 3051 C), Yokogawa (EJA, EJX Series). Familiar with use and application of communicators using HART protocol (475). • Performing Alarm and trip Tests.• Involved for overhauling the valves and replacement of spare parts on site and test bench (masonelian, fisher, mokweld etc.)• Wellhead’s Hydraulic valves like SCSSV, SSV Valves function check.• Pre-Commissioning, start-up, commissioning activities, Air Compressor, DCS simulations & monitoring for loop checks, field instruments commissioning. Loop checks & its calibration. Trouble shooting during commissioning test runs and start-up co-ordination.• Shutdown job of commissioning of each unit calibration of preventive maintenances of trouble shooting of field Instruments.• Having experience in commissioning of instruments in test separator, gas separators, manifold, metering skid areas.• Involve installation, calibration, loop checking, commissioning and troubleshooting of Instruments with Start-up Operation.• Coordinate with the principals and main contractors for the planned jobs and brief them the proceedings. Procuring the work permits and make sure that all the safety procedures are brought in practice.• I was working has been in Instrument Loops testing, function test, Calibration and Commissioning • Activates in process area instrument like Transmitter Control Valve with Fisher DVC 6000F Series Positional & Metso & Siemens Positioned, SOV, ESDV, ON/OFF Valve, Thermocouple, RTD, Familiar with 375 Field Communicator.

Kuwait

• Attending daily jobs allotted by the Supervisor like PM Check, Alarm and Trip Checks.• Involve in day-to-day plant maintenance.• Instrument related jobs coming up every now and then called for by the Operations Department like check and calibrate the instruments for abnormal readings, field calibration of control valves.• Participate in stand by duty to maintain 24-hour coverage with maintenance personal for the assigned operations facilities. Controller transmitters control valves and ESD valves, indicator, relay solenoids, control panels.• Shutdown activities handled. Removing & installing all types of instruments & control valves.• Well versed to calibrate & configure the SMART series Instruments with Hand held Communicator.• Calibration and testing of high-pressure transmitters and valves.• Attending daily jobs allotted by the Supervisor like PM Check, Alarm and Trip Checks.

Abu-Dhabi

• Involve Installation calibration, loop checking, commissioning and Troubleshooting of Instruments with Start-up Operation.• Can work independently with P & I Diagrams, and Plant Instrument Location and wiring diagrams, Signal Cable diagrams, Loop Diagrams All supporting documents can produced as and when required. • I was working has been in Instrument Loops testing, function test, Calibration and Commissioning.• Coordinate with the principals and main contractors for the planned jobs and brief them the proceedings. Procuring the work permits and make sure that all the safety procedures are brought in practice.• Maintenance and calibration of different type of pressure switches, level switches, and transmitters. • Activates in process area instrument like Transmitter, Control Valve with Fisher DVC 6000F Series Positional & Metso & Siemens Positioned, SOV, ESDV, ON/OFF Valve, Thermo couple, RTD, Familiar with 475 Field Communicator.

Gujrat, India

• Involve in pre-commissioning, commissioning and erection including piping, cable glanding, and termination. • Involve in day to day plant monitoring, maintenance works, calibration of all type's of instrument such as pressure switches, level switches, transmitter, control valve, and safety valve. • Functional checking of Thermocouples and RTD's. • Involve in day to day plant monitoring maintenance job, data logging and operation activities through SIEMENS brand PLC. • Strictly following preventive maintenance schedule for instrument. • Maintenance and calibration of different type of pressure switches, level switches, and transmitters. • Maintenance and calibration of I/P and P/I converter, maintenance of control valve and safety valve, functional checking of thermocouple and RTD.