John Davis Email & Phone Number

United States

Houston, Texas, US

Baton Rouge, Louisiana, US

Overseeing the final commissioning stages supporting Shell operations to bring their new Ethylene Cracker on line.

Baton Rouge, Louisiana, US

Oversee the electrical commissioning and start-up of the YCI Methanol One manufacturing fatality.

Houston, Texas, US

2 on 1 Mitsubishi gas turbines with Toshiba steamer.

Sandton, Gauteng, ZA

Working with the owner to perform oversight and commissioning within the various substations and MCC on a multibillion chemical facility.

Scottsdale, Arizona, US

Operating as the owners rep overseeing the electrical commissioning of 2 GE 7FA's and a Toshiba steam turbine.

Chicago, IL, US

Managing the electrical startup phase of a 2 on 1 Mitsubishi/Alstom power generation station.

Kansas City, MO, US

Managing electrical startup and commissioning activities for a variety of projects in and around the Houston area.

Corpus Christi, TX, US

Overseeing the electrical commissioning of the MB3 project for Burns and McDonnell at ONEOK Hydrocarbon,L.P. NGL Fractionation Plant in Mont Belvieu, TX.

Houston, TX, US

Technical Adviser on a 160MW expansion project at the Shell refinery in Deer Park, TX.

Calgary, Alberta, CA

Reviewing electrical turnover documentation for the Keystone Pipeline Gulf Coast Project.

Scottsdale, Arizona, US

Evaluated the construction and commissioning efforts for an 800MW PLP power plant in Singapore. Developed an interactive punch list that the owner could review to correct procedures and deficiencies.

Corpus Christi, TX, US

Commissioning two new Siemens SGT6-5000F Gas Turbines and two Siemens SST-800 steam turbines for NRG.

Atlanta, Georgia, US

Commissioning electrical components at CH2MHILL in Collie, Australia.

Chantilly, Virginia, US

Acworth, Georgia, US

Working in Dubai, UAE. Commissioning 2 Rolls Royce 501's (Allison KB5-S). Small Project with a very limited time frame. Looks like it will be a fun job.

Glastonbury, Connecticut, US

Working as the new Lead Electrical Start-up Engineer at the P G and E Colusa Generation station in Maxwell, CA. Two GE Frame 7FA's and a GE DII STG

Sedalia, MO, US

Walters Power, 51MW Rental Power Plant NauderoI am currently the Lead Electrical Start-up Engineer on a new construction project going on in Naudero, Pakistan. We are commissioning two Rolls Royce RB211 gas turbines. My duties include a complete checkout of the controls system, meggering all 3.7kv and 380v cables, Hi-Potting all 13.3kv cables and buss.

Commissioning of 2 on 1 combined cycle GE Frame 7FA's with GE steam turbine.

I worked as an Electrical Start-up Engineer commissioning two GE Frame 7FA's and a GE steam turbine. My duties included a complete checkout of the generator circuit breaker, exciter, LCI, 5kv switchgear, 480 VAC switchgear, 125 VDC system, etc. I worked closely with Precision Testing to ensure that all generator and transformer relays were set properly, as.

Held the position of Lead electrical start-up engineer on numerous projects including the commissioning of three GE LMS100's, one Rolls Royce RB211, turn around project on four GE frame 7FA's, etc.

LDC, Waterbury Power Generation ProjectI held the position of I & E Lead Start-up Engineer, commissioning a new GE LMS100, utilizing the use of both natural gas and liquid fuel oil on a remote start, simple cycle power plant. I coordinated the efforts of three independent testing groups to insure that all testing was held to NETA specification, as well.

PSEG Fossil Combined Energy Power PlantI held the position of I & E Lead Start-up Engineer on a turnaround project for PSEG which included the calibration and replacement of all PT's, TT's, FT's, etc. on the GE7FA's, the HRSG's and the steam generator. This was a very aggressive three week schedule, and required extensive planning to allow the work to.

I served as the I &E Lead Start-up Engineer in charge of the start-up phase of a78kw cogeneration power plant. My duties included a complete checkout of the Rolls Royce gas turbine control system and generator breaker, as well as trouble shooting the ABB steam turbine, generator, and generator breaker. I had the responsibility of going through the.

I was the Lead Electrical Start-up Engineer overseeing the commissioning of the 12.47kv, 4.16kv, and the 480v SWGR for Aventine Energy's new Ethanol plant. I worked with Kiewit Energy's turnover coordinator to ensure that all third party testing was performed to NETA standards and Kiewit's internal standards. My duties included scheduling craft support to.

Bellinzona, Ticino, CH

I served as the Start-up Foreman for the electrical crew. The testing included measuring the ratio and saturations points of the CT's and PT's on the 5kv switchgear and the programming of the GE Multilins LM-10's and doing the secondary injection testing of the Schweitzer relays on the 5kv, substations and 480v motor control centers. Commissioning also.

Louisville, CO, US

Job held duties consisted of coordinating the installation and commissioning of the 5kv and 480v switchgear. I oversaw the termination of all medium and low voltage connections. I also worked with the electrical contractor on scheduling daily work activities and providing the proper documentation for contractor, such as specification and loop sheets.

Laid out work schedule for electric crew, ordered material as needed, routed conduit and wiring runs per prints. Set 13.8kv transformers and ran bus duct for switchgear. I terminated all medium voltage switch gear. I was in charge of start-up and commissioning i.e.. did point to point on wiring from field to PLC, megged motor leads, checked phase wiring.

Member of Start-up crew for power house stage of construction. Troubleshooting electrical system, megging motors and cables, continuity test on control wiring, point to point internal PLC wiring, rotation and phase checks, adjust settings on breakers and starters.

Bellinzona, Ticino, CH

Foreman over electrical crew. Laid out work schedule for crew, maintained material ordering sheets, wired all PLC cabinets, installed instrumentation, including; DPI's, TE's, FE's, etc. In charge of Start-up and commissioning i.e.. megged motor leads, did point to point on wiring from field to PLC, checked phase wiring and motor rotation, checked internal.

Louisville, CO, US

James Hardy PlantMember of Termination crew for a large Industrial job. Wired PLC cabinets and control panels. Wired controls for gas turbines and installed flow meters, pressure transmitters, temperature transmitters, etc. Troubleshooting electrical system, megging motors and cables, continuity test on control wiring, point to point internal PLC wiring.

AEP Power Plant Sub-Station Set transformers and ran feeders from sub stations to switch gear. Monitored the installation of all control wiring and MCC terminations. Did HI-POT test on medium voltage switchgear and cables. Megged low voltage cables, performed phase checks, did point to point on control wiring, and checked rotation on motors.

Installing new generators in nuclear facility. Wired controls for turbines, installed flow transmitters, pressure transmitters, temperature transmitters, etc. Member of commissioning crew... megged motor leads, did point to point on wiring from field to PLC, checked phase wiring and motor rotation, checked internal motor starter wiring, etc.

Intel Celeron Processing PlantForeman over electrical crew. Laid out work schedule for crew, maintained material ordering sheets, wired all PLC cabinets, installed and calibrated instrumentation, including; DPT's, TT's, FT's, etc. Start-up and commissioning team i.e.. checked phase wiring and motor rotation, checked internal motor starter wiring, did point.

Bellinzona, Ticino, CH

I ran conduit, built stress cones for medium voltage connections, terminated motor leads, wiring PLC cabinets.

Hang cable tray, run rigid & EMT conduit, pull wire, terminate motor leads, weld and mount brackets for transformers and lighting.

Rebuild electrical cabinets for production machinery, run conduit and pull feeders for production equipment.

Rewire and install industrial equipment, retrofit D.C. motors to existing machinery, run conduit and pull cable to feed equipment.

Built electrical control cabinets for yarn extrusion machines. Install starters, control boards, PLC Panels, etc.

Learned basic wiring techniques, worked under Master Electrician while training to become a journeyman.

Machine fixtures and jigs for use in the production of slip rings, program and set-up CNC equipment, maintain tooling and fixtures.

Bachelor Of Science, Machine Technology

H.S. Diploma, Academic

Education record

Education record