John Trotter's Location
Fredericksburg, Virginia, United States, United States
John Trotter's Contact Details
John Trotter work email
- Valid
- Valid
- Valid
- Valid
John Trotter personal email
n/a
John Trotter phone numbers
About John Trotter
Over 40 years of engineering and management experience with naval systems, navy weapon systems, and joint programs. Currently Principal Engineer supporting naval radar systems. Previous projects include: Electronic Warfare (EW), Mine Resistant Ambush Protected (MRAP) Joint Vehicle Program (Engineering Team Lead); Navy Electronic Warfare Systems (Principal Engineer); Open Architecture Track Manager (OATM) (Principal Engineer); Ground-based Midcourse Defense (GMD) system (Senior Engineer and Delivery Order Manager); Aegis Vertical Launching System (VLS) (Senior Engineer); and Tomahawk Weapon Control System (TWCS) (Engineer/Analyst).Please note that I am scheduled to retire around June 2025. I may continue working part time after that.
John Trotter Work Experience Details
-
Principle EngineerAmentum Aug 2012 - PresentChantilly, Virginia, UsSupports Naval Surface Warfare Center (NSWC) Dahlgren Division (NSWCDD) in the acquisition of the Future X-Band Radar (FXR) system. Analyzes pre-decisional documents, and develops the External (Logical) Interface Requirements Specification (IRS) and the Software Development Plan (SDP).As Test Execution Lead, supported the Navy’s Program Executive Office Integrated Warfare Systems (PEO IWS) in the testing of Nulka decoy upgrades. In coordination with external agencies develops test plans and procedures for shipboard testing and assesses the developer’s test program. Generates presentations for PEO IWS leadership, Test Readiness Reviews (TRR), Test Execution Reviews (TER), and shipboard tests. Conducts Test and Evaluation Working Group (TEWG) meetings – generating agendas, tracking action items to completion, and maintaining schedules in Microsoft Project. Develops Modeling and Simulation (M&S) Verification, Validation, and Accreditation (VV&A) plans in support of decoy testing. In earlier assignments, supported PEO IWS in the testing of the MK 59 Decoy Launching System (DLS), and the Advanced Decoy Architecture Project (ADAP) Nulka payload. In 2018 provided an on-site presence at the developer’s facility which ensured that testing of the latest Nulka upgrade completed in time for the Milestone C decision to proceed to the next acquisition phase of the program.Supported NSWCDD in the development of the Surface Electronic Warfare Improvement Program (SEWIP). Developed and maintained the Integrated Master Schedule (IMS) for the Soft Kill Coordinator (SKC) using Microsoft Project. Supported the development of the SKC Project Management Plan by drafting its Configuration Management, Risk Management, and Roles and Responsibilities sections.Managed the procurement of two antenna pedestals for a SEWIP Block 2 test trailer, including managing drawing changes, tracking vendor progress, and conducting functional testing. -
Engineering LeadUrs Corporation Mar 2007 - Aug 2012San Francisco, Ca, UsManaged a team of over 30 engineers and analysts, across several disciplines, in support of the Joint MRAP Vehicle Program. Supervised the acquisition of components and systems intended for cross-platform integration, verifying that the Department of Defense acquisition process is followed.Verified that requirements provided in the Capability Production Documents (CPD) and theater-generated statements of need are met. Developed and maintained engineering documents required for an ACAT 1D program, including the System Engineering Plan, System Security Authorization Agreement, Information Support Plan, Requirements Traceability Matrices (RTM), and Program Protection Plan.Analyzed vehicle automotive and occupant protection performance and provides engineering solutions for any deficiencies. Developed test plans and procedures to validate vehicle upgrades.Supervised the implementation and execution of the Configuration Management process which functions across multiple manufacturers and government organizations, and conducted Physical Configuration Audits (PCA) of vehicles and Government Furnished Equipment (GFE) at manufacturer sites.Using a lesson-learned from an engineering project, lead the development of a process and toolkit to expedite future acquisition activities. -
Principal EngineerUrs Corporation Jul 2004 - Mar 2007San Francisco, Ca, UsSupported the Office of Naval Research (ONR) in the development of the Multifunction Electronic Warfare (MFEW) system. Analyzed system requirements and design. Evaluated and tracked MFEW program risks. Estimated electromagnetic environment on board DD(X), and its impact on MFEW performance.Supported PEO IWS6 in the development of the Open Architecture Track Manager (OATM). Developed requirements for the OATM System Requirements Document (SRD). Analyzed Single Integrated Air Picture (SIAP), DD(X), and CVN-21 design and requirements, and developed solutions to address the technical differences between each system’s Situational Awareness (SA) implementation.Authored process management procedures in support of developing an organizational Capability Maturity Model Integration (CMMI) process. Served as a member of the Engineering Process Group (EPG) and Engineering Steering Group (ESG). Note: During this period EG&E was acquired and incorporated into URS Corporation.
-
Senior EngineerSchafer Corporation 2003 - 2004Arlington, Va, UsDeveloped and maintained requirement and design documents for the GMD Fire Control/ Communications (GFC/C) and Space Based Infrared System (SBIRS) related interfaces. Researched technical interface issues, developed change packages, coordinated with SBIRS vendor, and made presentations on interface issues to the Boeing change control boards.Conducted system engineering analyzes related to specific GMD technical issues. One significant example was missile typing. Developed a problem solution after analyzing several alternatives, presented findings to management and customer organizations, and worked to identify and mitigate system risk. -
Senior EngineerEg&G Technical Services 1999 - 2003UsSupervised and supported the Independent Verification and Validation (IV&V) and VV&A in support of the Ground-based Midcourse Defense (GMD) program. Supervised the activities of up to 10 EG&G personnel and up to 20 other engineers provided by five separate sub-contractors. Generated budgets, cost estimates, and staffing plans.Performed requirement, design, and code analysis for the GMD Fire Control (GFC) and In-Flight Interceptor Communication System (IFICS) software, written in Ada. Traced requirements from the GMD Capabilities Document (GCD), through the Prime Item Development Specifications (PIDS), to the Software Requirements Specifications (SRS). Executed software tests and analyzed data. Developed and maintained IV&V plans, procedures, and templates.Performed system engineering support for the Navy’s Advance Integrated Electronic Warfare System (AIEWS). Analyzed system design and interfaces against performance requirements. Analyzed and tested signal processing algorithms using MATLAB. Supported Navy customer at technical design review meetings.Performed design analysis and code analysis on the AIEWS C, C++, and Ada code. Identified design and code errors, and developed software solutions. Verified that software algorithms satisfied overall system requirements. -
Senior EngineerCsc 1987 - 1999Global, UsAs Technical Lead of a software test team, supervised seven test engineers in test development, execution, and analysis for the VLS Launch Control Computer Program (LCCP). Developed test procedures, maintained RTMs, conducted tests, analyzed test data, and generated Software Trouble Reports (STR). Developed test plans for the verification of software modifications.Performed code analysis of the VLS LCCP CMS-2 and Ultra 32 code. Identified coding errors, generated STRs, and designed software modifications. Verified the proper implementation of approved changes into the VLS design and code through design and code analysis, and software testing.Analyzed VLS systems for Safety and Nuclear Safety concerns. Identified hardware and software vulnerabilities, evaluated risks, and developed design modifications.Performed requirements analysis for the VLS LCCP, Shipboard Reduce, and Interface Driver Simulation (IDSIM44) programs.As a member of the Process Engineering Group (PEG), was responsible for implementing the Software Engineering Institute (SEI) Capability Maturity Model (CMM) for the VLS Project. -
Engineer/AnalystVitro Corporation Oct 1984 - Nov 1987Performed system level testing on TOMAHAWK Weapon Control System (WCS) AN/SWG-2 and AS/SWG-3 configurations. Supported Combat Systems Engineering Development Site (CSEDS) at Lockheed Martin (then RCA). Operated and analyzed performance of TOMAHAWK Launch Control Group) LCG and Track Control Group (TCG) during AEGIS combat system integration testing.Analyzed VLS external interfaces to the weapon control systems and missile systems. Developed an Interface Design Specification (IDS) for the NTDS Type E Low Level Serial (LLS) interface between the Tomahawk WCS and VLS.
-
Propulsion Plant Watch OfficerUnited States Navy May 1980 - Oct 1984Washington, Dc, UsAs Propulsion Plant Watch Officer and Division Officer on board USS Nimitz (CVN-68), supervised approximately 35 technicians in the operation and maintenance of the nuclear propulsion systems.
John Trotter Skills
Systems Engineering
Defense
Navy
Program Management
Testing
Dod
Engineering
Military
Government Contracting
Electronic Warfare
Engineering Management
Security Clearance
Government
Software Documentation
Project Management
Requirements Analysis
Requirements Management
System Design
Aerospace
Integration
Leadership
Information Assurance
Radar
Proposal Writing
Technical Writing
C4isr
Configuration Management
Team Leadership
Six Sigma
Risk Management
Risk Assessment
Pmp
Software Engineering
U.s. Department Of Defense
Documentation
Microsoft Office
John Trotter Education Details
-
University Of VirginiaElectrical Engineering -
University Of RochesterElectrical Engineering
Frequently Asked Questions about John Trotter
What company does John Trotter work for?
John Trotter works for Amentum
What is John Trotter's role at the current company?
John Trotter's current role is Principle Engineer.
What is John Trotter's email address?
John Trotter's email address is jo****@****com.com
What is John Trotter's direct phone number?
John Trotter's direct phone number is +170352*****
What schools did John Trotter attend?
John Trotter attended University Of Virginia, University Of Rochester.
What skills is John Trotter known for?
John Trotter has skills like Systems Engineering, Defense, Navy, Program Management, Testing, Dod, Engineering, Military, Government Contracting, Electronic Warfare, Engineering Management, Security Clearance.
Free Chrome Extension
Find emails, phones & company data instantly
Find verified emails from LinkedIn profiles
Get direct phone numbers & mobile contacts
Access company data & employee information
Works directly on LinkedIn - no copy/paste needed
Download 750 million emails and 100 million phone numbers
Access emails and phone numbers of over 750 million business users. Instantly download verified profiles using 20+ filters, including location, job title, company, function, and industry.
Start your free trial