AeroLeads people directory · profile

John Cook Email & Phone Number

Senior Staff Engineer, Mixed Signal Component Verification at MakeIt Labs Corp.
Location: Nashua, New Hampshire, United States 8 work roles 1 school
1 work email found @infineon.com LinkedIn matched
✓ Verified July 2026 4 data sources Profile completeness 100%

Contact Signals · 1 work email

Work email j****@infineon.com
LinkedIn Profile matched
3 free lookups remaining · No credit card
Current company
MakeIt Labs Corp.
Role
Senior Staff Engineer, Mixed Signal Component Verification
Location
Nashua, New Hampshire, United States

Who is John Cook? Overview

A concise factual answer block for searchers comparing this professional profile.

Quick answer

John Cook is listed as Senior Staff Engineer, Mixed Signal Component Verification at MakeIt Labs Corp., based in Nashua, New Hampshire, United States. AeroLeads shows a work email signal at infineon.com and a matched LinkedIn profile for John Cook.

John Cook previously worked as Senior Staff Engineer, Mixed Signal Component Verification at Infineon Technologies and Staff Engineer, Mixed-Signal Component Verification at Infineon Technologies. John Cook holds Bscompe, Electrical And Computer Engineering from University Of Hartford.

Company email context

Email format at MakeIt Labs Corp.

This section adds company-level context without repeating John Cook's masked contact details.

{first}.{last}@infineon.com
89% confidence

AeroLeads found 1 current-domain work email signal for John Cook. Compare company email patterns before reaching out.

View email format View company profile Management contacts
Profile bio

About John Cook

Verification / Lab Automation Engineer: I evaluate highly complicated mixed signal DC-DC converters by creating test cards and writing test automation programs with Python. In 20 years of work, these are some of the most complicated digitally controlled parts I've worked on. Data is saved to SQLite database for analysis with Python or Excel. I also do my own schematic capture and PCB layout work with Altium or KiCAD.I pride myself on well laid out PCB projects and well documented and maintainable Python programs. There is no point in creating something that nobody can understand later on so I document everything.Associate Design Engineer:Built equipment for and performed a new IC correlation, which means you verify that every last little thing in the new IC meets or fails to meet design spec and compare with a test engineering report. I had to keep very detailed notes on everything I did and how I did it and report to the IC designer as I went. Battery Balancing project. I inherited a large, complex long term project that subjected lead-acid batteries to repeated loading to measure performance in a balanced vs unbalanced test configuration. It was written in Python and used multiple pieces of test equipment to charge, discharge, and measure the battery performance. I doubled it to two sets of batteries using an Arduino with Firmata library. Project recorded data into SQLite dB which was exported into graphs in Excel. Project ran for over a year.Madman Lighting Inc:Designer and Producer of simple to use electronic lighting kits for scale modelers. LED and fiber optics lighting expert. Master Model builder, winner of multiple awards for highly detailed scale models.Specialties: PCB layout, circuit simulation with LT Spice, design of moderately complex circuits, simple embedded programming in C, basic database (SQL) programming, soldering of tiny SMT components under microscope, electronics purchasing.KEYWORDS: Electrical Engineering, Schematic capture, Circuit Simulation, SPICE, PCB design, switch mode power supply, micro controller, embedded C, Python, programming, database, SQL, test equipment, meter, oscilloscope, logic analyzer, loop analyzer, LED driver.

Listed skills include Electronics, Pcb Design, Semiconductors, Test Equipment, and 22 others.

Current workplace

John Cook's current company

Company context helps verify the profile and gives searchers a useful next step.

MakeIt Labs Corp.
Makeit Labs Corp.
Senior Staff Engineer, Mixed Signal Component Verification
Website
infineon.com
AeroLeads page
Company profile
View company profile Email format
8 roles · 29 years

John Cook work experience

A career timeline built from the work history available for this profile.

Staff Engineer, Mixed-Signal Component Verification

Infineon Technologies

Design custom test hardware and software to verify proper operation of new integrated circuits. Programming with Python, SQLite database, LabVIEW. I can design, build and program a complete automatic lab bench testing solution. Specialty: Analog and mixed signal DC-DC converters, Lab Automation with Python, I2C communication, embedded micro controllers, creating new test hardware and software.

Member

Makeit Labs Corp.

Nashua, New Hampshire, Us

- Member since early days in 2010- Made a difference by volunteering often for build days, construction days, "MakeIT Better Days"- Classes on Auto Lift, Woodshop, Laser, Autodesk Fusion 360.

Designer / Founder

Madman Lighting Inc

- Designer and Founder of small side business that makes lighting kits for scale hobbyists. - Designed a small, low-cost LED and Special FX controller for lighting sci-fi scale models.- Created 30+ kits with the same controller, variations in software.- Ran for 12+ years, peaked at $30k in sales per year.www.madmanlighting.com

Jun 2005 - Feb 2018

Associate Design Engineer

Linear Technology

Milpitas, Ca, Us

-Senior Electrical Engineering "Super Tech" for switch mode power supplies and micro-controllers.-Correlation of new ICs with datasheet for new product verification. LTC3351, LTC3350, more.-PCB Design layout, prototype PCB production and assembly. -Firmware programming in C of micro-controllers for prototype projects.-Automatic test programming in Python to evaluate new integrated circuits. -Several long-term projects including: Digitally controlled power supply: Designed, built and programmed test equipment to emulate a solar panel. Unit had a display, control dial, remote USB interface and was very well documented. Battery Balancer long-term evaluation: Expanded upon a large Python and test equipment rig that tested battery balancing integrated circuit parts. Various test equipment was used to control large battery pack tested to destruction. Large data set collected in SQL database for over a year.Super Precise Signal Generator: Created a 9 pole L-C filter to make a super precise sine wave needed by the ADC designer for design evaluation. Worked closely with the designer to create special custom test equipment.Life-long Learner: I loved working for LTC because there was always something new and interesting to learn there. I expanded my knowledge of engineering considerably, learning the special details of switch mode power supply design, a lot about micro-controllers and firmware, and also about op-amps, ADCs, and wireless power transfer.

Jun 2010 - Jan 2018

Associate Applications Engineer

Linear Technology

Milpitas, Ca, Us

Super tech for a major semiconductor manufacturer. I make all the demo cards and many prototypes for the entire Northeast Sales Area. I support six Field Apps Engineers, building to spec their requests for demos and protos.

Jun 2007 - Apr 2009

It Specialist

Benchmark Electronics

Tempe, Arizona, Us

Help Desk for mid sized electronics manufacturing facility. Wrote many small scripts to automate setup tasks, familiar with all flavors of MS Windows and Office.

Jun 2000 - Jun 2007

Software Engineer

Octave Commications

Web programmer. Wrote a simple web interface with Cold Fusion Web-Database system for an automated telephone conferencing system.

1998 - 1999 ~1 yr
Team & coworkers

Colleagues at MakeIt Labs Corp.

Other employees you can reach at infineon.com. View company contacts →

AS Andreas S. Andreas S. Colleague at Makeit Labs Corp.Starnberg, Bavaria, Germany View → SY Siek Yin Lim Siek Yin Lim Colleague at Makeit Labs Corp.Kulim, Kedah, Malaysia View → DS Dirk Skupke Dirk Skupke Colleague at Makeit Labs Corp.Bavaria, Germany View → AA Ali Ahmadi Ali Ahmadi Colleague at Makeit Labs Corp.Klagenfurt-Villach Area, Austria View → CB Christine Bonk Christine Bonk Colleague at Makeit Labs Corp.Greater Bielefeld Area, Germany View → DL Dr. Ludwig Hüttenhofer Dr. Ludwig Hüttenhofer Colleague at Makeit Labs Corp.Germany View → MH Magnus Hell Magnus Hell Colleague at Makeit Labs Corp.Neubiberg, Bavaria, Germany View → BS Börge Schmelz Börge Schmelz Colleague at Makeit Labs Corp.Bamberg, Bavaria, Germany View → SD Salvador De La Torre Rodriguez Salvador De La Torre Rodriguez Colleague at Makeit Labs Corp.Austria View → NR Nina Rozali Nina Rozali Colleague at Makeit Labs Corp.Baling, Kedah, Malaysia View →
1 education record

John Cook education

  • University Of Hartford
    University Of Hartford
    Electrical And Computer Engineering
FAQ

Frequently asked questions about John Cook

Quick answers generated from the profile data available on this page.

What company does John Cook work for?

John Cook works for MakeIt Labs Corp..

What is John Cook's role at MakeIt Labs Corp.?

John Cook is listed as Senior Staff Engineer, Mixed Signal Component Verification at MakeIt Labs Corp..

What is John Cook's email address?

AeroLeads has found 1 work email signal at @infineon.com for John Cook at MakeIt Labs Corp..

Where is John Cook based?

John Cook is based in Nashua, New Hampshire, United States while working with MakeIt Labs Corp..

What companies has John Cook worked for?

John Cook has worked for Infineon Technologies, Makeit Labs Corp., Madman Lighting Inc, Linear Technology, and Benchmark Electronics.

Who are John Cook's colleagues at MakeIt Labs Corp.?

John Cook's colleagues at MakeIt Labs Corp. include Andreas S., Siek Yin Lim, Dirk Skupke, Ali Ahmadi, and Christine Bonk.

How can I contact John Cook?

You can use AeroLeads to view verified contact signals for John Cook at MakeIt Labs Corp., including work email, phone, and LinkedIn data when available.

What schools did John Cook attend?

John Cook holds Bscompe, Electrical And Computer Engineering from University Of Hartford.

What skills is John Cook known for?

John Cook is listed with skills including Electronics, Pcb Design, Semiconductors, Test Equipment, Simulations, Analog, Embedded Systems, and Microcontrollers.

Find 750M verified contacts

Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.