Jonathan Baggett Email & Phone Number
@stantec.com
LinkedIn matched
Who is Jonathan Baggett? Overview
A concise factual answer block for searchers comparing this professional profile.
Jonathan Baggett is listed as Roadway Designer at Stantec, a with 30918 employees, based in Orlando, Florida, United States. AeroLeads shows a work email signal at stantec.com and a matched LinkedIn profile for Jonathan Baggett.
Jonathan Baggett previously worked as Transportation Engineer III at Keith and Roadway Designer at Wgi. Jonathan Baggett holds Bachelor’S Degree, Civil Engineering from Wayne State University.
Email format at Stantec
This section adds company-level context without repeating Jonathan Baggett's masked contact details.
AeroLeads found 1 current-domain work email signal for Jonathan Baggett. Compare company email patterns before reaching out.
About Jonathan Baggett
I am experienced in the production of roadway projects involving design and preparations of construction documents including typical section packages, design exceptions and variations, roadway plans, pavement design packages, maintenance of traffic plans, project quantities, utility adjustment sheets, signalization plans, signalization designs, design build contracts, an in-house primary design consultant in Broward County and pedestrian safety initiatives. I am passionate, genuine and generous. I enjoy the challenge and impact of being a roadway engineer in central Florida. My confidence and communication skills have provided ample opportunity for experience with planning, coordinating, guiding and delegating. However, I am currently enthralled in the 3D modeling tools and Open Roads Designer Software. I plan to continue in the direction of developing my technical skills/knowledge to strengthen my engineering abilities for the next couple years before I begin to transition into project management. I have a great appreciate for the role and impact of leaders, especially in this industry. I want to make a difference and positive impact on my team, for my company and in my industry. I have experience as lead designer for FDOT projects in District 1, 4, 5 and 7 (Turnpike). I also have experience as primary 3D modeler for 3 FDOT projects, including a project being completed (initial engineering design and processes) using OpenRoads Designer.
Listed skills include Pavements, Writing, Personal Finance, Open Roads Designer, and 10 others.
Jonathan Baggett's current company
Company context helps verify the profile and gives searchers a useful next step.
Jonathan Baggett work experience
A career timeline built from the work history available for this profile.
Role listed
Roadway Designer
Transportation Engineer Iii
Report directly to Senior Project Manager and Department Head in coordination and design of FDOT and other municipal roadway projects. Supervised two team members to develop and produce plans using MicroStation GeoPak, adhering at every level to state standards and design practices. Developed and administered training company wide regarding Open Roads Designer, attended regular project meetings and conducted presentations for company QA/QC policy to all new employees. Other daily tasks included:• Designing multiple roadway projects simultaneously,• Managing roadway design project deliverables from planning through construction,• Monitoring project schedules to meet submittal deadlines, • Communicating with staff, general public and contractors,• Take-offs, developing, producing and auditing quantities,• Conducting field visits from kick-off to completion of work,• Creating presentations and exhibits for proposed projects or projects in planning phase to illustrate scope of work,• Develop, prepare and present detailed designs in project plans to support engineering principles,• Researched and provided estimates for projects,• Reviewed government regulations and ordinances,• Making recommendations or presenting alternative solutions to problems.
Roadway Designer
Assisted a Senior Project Manager with developing engineering designs including maintenance of traffic, flexible pavement, estimates, signalization and limited access facilities. Daily tasks consisted of:• Developing quantity take offs, estimates, LREs, pavement design reports, • Design variations/exceptions, design build tasks for FDOT, • Coordination with sub-consultants, • Training development, • QA/QC, • Roadway design and drafting in MicroStation Power GeoPak V8i,• Collaborating with teams from other offices to alleviate large workloads,• Signalization designs for design-build contracts from NTP to construction,• Research and write Letters of Interest for marketing pursuits across multiple FDOT districts,• Participate in the preparation of the presentation for marketing pursuits that resulted in winning projects from state and private entities.
Highway Designer/ Deputy Project Manager
• Accomplish and coordinate all roadway tasks prescribed in roadway project scopes with minimalsupervision from project manager and engineer of record. Track all deliverables and submittals inrespect to their deadlines outlined in the project schedule.• Create variations, exceptions, memorandums, reports, engineering documents, quality controlrequirement plans, analytics, comment responses and any engineering task that helps createproficiency and efficiency.• Attend project meetings with major clients and contractors for anything required. Proficient inMicrostation Geopak, attended courses and currently using Microstation 3D for a large-scale statefunded project.• Provided in-house consultant support services for the design, plan preparation, implementation,construction engineering and inspection of various types of construction improvement projects forBroward County Engineering.
Roadway Designer/Engineeering Tech
Geometric Design of Roadways and Intersections (ex. Port St. Lucie Blvd @ FTE) using Bentley Microstation SS4 Geopak. Production of Roadway and associate plansheets in accordance with state and local standards for plans production. Management of project deliverables and submittals in accordance with the project schedule. All tasks were thoroughly review for adherence to agency standards directed by the project's scope and QC Plan. Communication with state agencies, local municipalities, contractors, sub-consultants, prime consultants, and members within our team across all disciplines of design.Technical Writing which included three Existing Roadway Condition Evaluation Reports on small and large state road encompassing all aspects of roadway design and construction. The reports included extensive field reviews to determine deficiencies, safety issues and potential improvements. Contracted by FDOT District 4 to work up to three days per week as an in-house support consultant creating procedures for quickly reacting to unsafe conditions created by vehicle collision into roadside equipment. Technical documents were written immediately proceeded by a district wide tour of maintenance facilities presenting and instructing FDOT maintenance personnel of the newly implemented procedures.Review Signal Timing reports and data analysis of intersections and corridors throughout Florida's District 5 and 6.
Eit/ Cad Drafter
Intern Traffic Engineer
• Assisted in the management and development of major metropolitan corridors in terms of signal timings, vehicle detection systems, corridor optimization and public interest.• Gained technical client relations experience developing presentations, project performance efficiency updates, and creating traffic management plans for major urban events used by county personnel. • Implemented vehicle detection technologies in conjunction with corridor optimization.• Integrated ITS technologies and methods into traffic systems for the development of intersection networking and remote traffic signal control.• Supported the preparation and production of media coverage on multiple occasions spotlighting the continued achievements and development of the project and county facilities involved.
Student Research Assistant
• Directly involved in the development, implementation and evaluation of traffic safety programs on a local, state and national levels. These programs cover a broad spectrum of initiatives, which integrate policies and programs involving engineering, education and enforcement. • Meticulously extracted data from a variety of media to be analyzed, developed, and presented to clients and the public.
Assistant Inspector
• Assure road construction project specifications were adhered to, including federally funded projects that require the need for daily, accurate and detailed record keeping.• Analyze blueprints and operational manuals to manage and verify onsite construction completed by multiple construction companies. • Required to document daily site operations including contractor tasks and pay item regulation using online management software.• Initially trained directly with surveyors, materials testing lab, and inspectors to develop an early well rounded understanding of road construction and inspection. • After short training period was assigned to take over a 6-mile subdivision re-paving project independently. Commonly requiring up to 12 hour days due to Michigan's short road construction season.
Machinist Mate 3Rd Class
• Obtained principal qualifications as power plant supervisor in conjunction with training peers in highly technical and hostile situations.• Coordinated and supervised numerous operations while thoroughly documenting explicit and specialized details using online databases and applications.
Colleagues at Stantec
Other employees you can reach at stantec.com. View company contacts for 30918 employees →
Elisa Cornelio
Colleague at StantecBoston, Massachusetts, United States
View →
EM
Eric Mantha
Colleague at StantecGreater Ottawa Metropolitan Area, Canada
View →
MD
Marissa Devey
Colleague at StantecSeattle, Washington, United States
View →
BK
Bruce Knepper
Colleague at StantecButler, Pennsylvania, United States
View →
CL
Cindy Larue
Colleague at StantecSarasota, Florida, United States
View →
JN
Jeffrey Napolitan
Colleague at StantecJacksonville, Florida, United States
View →
FK
Faiza Khan
Colleague at StantecAhmedabad, Gujarat, India
View →
BC
Brian Christianson
Colleague at StantecKamloops, British Columbia, Canada
View →
AJ
Abdul Joulak
Colleague at StantecBreda, North Brabant, Netherlands
View →
JB
Jens Boehme
Colleague at StantecMississauga, Ontario, Canada
View →
Jonathan Baggett education
-
Wayne State University
Frequently asked questions about Jonathan Baggett
Quick answers generated from the profile data available on this page.
What company does Jonathan Baggett work for?
Jonathan Baggett works for Stantec.
What is Jonathan Baggett's role at Stantec?
Jonathan Baggett is listed as Roadway Designer at Stantec.
What is Jonathan Baggett's email address?
AeroLeads has found 1 work email signal at @stantec.com for Jonathan Baggett at Stantec.
Where is Jonathan Baggett based?
Jonathan Baggett is based in Orlando, Florida, United States while working with Stantec.
What companies has Jonathan Baggett worked for?
Jonathan Baggett has worked for Stantec, Keith, Wgi, Metric Engineering, Inc, and Fr Aleman And Associates.
Who are Jonathan Baggett's colleagues at Stantec?
Jonathan Baggett's colleagues at Stantec include Elisa Cornelio, Eric Mantha, Marissa Devey, Bruce Knepper, and Cindy Larue.
How can I contact Jonathan Baggett?
You can use AeroLeads to view verified contact signals for Jonathan Baggett at Stantec, including work email, phone, and LinkedIn data when available.
What schools did Jonathan Baggett attend?
Jonathan Baggett holds Bachelor’S Degree, Civil Engineering from Wayne State University.
What skills is Jonathan Baggett known for?
Jonathan Baggett is listed with skills including Pavements, Writing, Personal Finance, Open Roads Designer, Research, Open Roads Modeling, 3D Modeling, and Roadway Design.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trial