Jason Taylor Email & Phone Number

Fort Worth, Texas, United States

• Facilitate the cargo securement program as scheduled, weekly or periodically.• Teach securement class to our BCO's and operators, in a classroom and hands-on setting, on a weekly basis. • Advise platform candidates of the North American Cargo Securement Standard and demonstrate proper use of freight handling equipment.• Provide North American Cargo SecurementStandard refresher information to selected BCO's and operators (platform and van), as needed.• Review the history of existing BCO's and operators to verify sufficient criteria for attending the securement course to switch from van/reefer to platform equipment.• Assist the Heavy Haul Department in classification of BCO's and operators.• Assist BCO's and operators to obtain sufficient securement equipment through vendors and/or the Landstar Contractor Advantage Purchasing Program (LCAPP).• Update necessary information in iSeries 400.• Respond to calls from BCO's and operators and provide solutions for BCO and operator questions/problems/concerns.• Attend/participate in "Safety Thursday" conference calls and safety/compliance meetings, as needed.• Monitor the Landstar Profile Management System (LPMS) and the company profile to schedule repeat violators for securement

Fort Worth, Texas, United States

• Establish revenue expectations with BCO's.Provide solutions for BCO and Operator questions/problems/concerns.• Post Orientation follow up with BCO's and Operators to determine their needs.• Work directly with BCO Advisors in managing and providing first contact information• Update Contractor, Tractor and Operator files in IBM iSeries, as needed.• Facilitate in the establishment of communication between new BCO's/Operators, their advisors, and CABS. • Help facilitate same between BCO's/Operators and their domicile agents.• Emphasize the importance of the "tools" Landstar offers. (Business Planners, Landstar.com, Load Alerts, IVR cards, Profit & Loss, Load tracker and Budget Worksheets, etc.).• Coordinate with orientation and securement coordinators and recommend changes to orientation and CABS program.• Perform as a back-up for Orientation, Securement, and CABS Coordinators including class instruction.• Handle incoming calls from BCO's and Operators.• Special projects and assignments as needed.• Perform Hours of Service Review with BCO's as needed.• Facilitate problem solving between agents and BCO's• Participate in safety meetings. May be during non-business hours or on-site as needed.• Coordinate and implement doubles and extended qualifications testing and enter test results in Docusign to be approved by Compliance and update IBM iSeries.• Examine prospective BCO'S qualifications and occupational history to determine eligibility for doubles testing with regards to Landstar's policy using Tenstreet Fleet Management.• Coordinate the extended qualifications training program for the Texas Field Operations Center from beginning to end, including testing prospective Operators/BCO'S and coordinate with various departments for qualification purposes.• Proficiency in MS Office, IBM iSeries, Tenstreet, Luma and Docusign.

Arlington, Texas, United States

• Reviews and determine eligibility of applicants for a Class-A Commercial Driver s License• Communicate clearly to candidates from a wide range of backgrounds to perform assigned task in order to perform each event as directed to include vehicle inspection, straight line backing, offset backing, parallel parking and road evaluation while operating a Class 8 Motor Vehicle• Identify possible safety hazards and react accordingly• Examine test equipment daily for compliance with safety and legal requirements• Enter results into CSTIMS (Commercial Skills Test Information Management System) with the Texas Department of Public Safety.

Dallas, Texas, United States

• Training students to diagnose vehicle malfunctionsthrough pre-trip, en-route and post-trip vehicleinspections• Observing over-the-road skills (backing, lane control,shifting patterns, axle weights, etc.)• Teaching how to use a manual transmission in differentdriving conditions (highway, city, night vs. day, inclementweather, etc.)• Showing how to use all onboard vehicle communicationand routing systems• Evaluating progress and grading students throughout theprogram• Maintaining student files in compliance with company and regulatory standards

Coppell, Texas

• Must properly load the assigned vehicle prior to departing for a scheduled or unscheduled route, and properly unload the assigned vehicle upon returning from a scheduled or unscheduled route. • Must drive a route efficiently and immediately communicate any noteworthy exceptions to Customer Service and the Branch Manager.• Must abide by all Department of Transportation (DOT) Regulations and ensure all required documentation is with the vehicle.• Must ensure proper delivery of product(s) that have been ordered by the customer. Must obtain the necessary customer signatures on the correct paperwork.• Must ensure that all driver logs and trip reports are completed timely and accurately.• Must be able to create appropriate paperwork for inbound/outbound transactions and retrieve route information from the network. Must have a thorough knowledge of applicable Federal Regulations (cGMP, DOT, IATA, OSHA, etc.), as well as all company Standard Operation Procedures (SOP's).• Must be able to effectively pick orders, handle returns from a customer, and enter INOmeter downloads.• Must be able to prepare 3PL, as well as contact the appropriate carrier in a timely manner, and prepare the required paperwork to ensure compliance with all federal regulations.• Must be able to wipe down INOvents for the Service Area, as well as perform QC's on devices.• Must ensure that all warehouse and administrative functions are done in accordance with company SOP's, and follow the highest standards of warehousing and distribution operations, customer service, and safety.• Must utilize SAP to produce STO's (Stock Transport Orders) to ship empty nitric tanks back to our manufacturing facility in Port Allen and to ship devices to various Agilitis. • Must utilize SAP to receive and ship routes and correct any exceptions that may occur including possibly manually correcting and processing Distribution Orders.• Must utilize SAP to process Distribution Orders for our branch in Mexico.

Fort Worth, Texas

* Perform safe operation of a commercial motor vehicle within the hours-of-service guidelines of the FMCSA and DOT* Safe procedures for coupling and uncoupling of trailers* The most efficient way to manage time to maximize profitability to Lone Star Transportation as a driver* Knowledge and compliance of CSA 2010 regulations * Perform Pre-trip and post-trip inspections and complete daily vehicle inspection reports.* Maintain Class A CDL w/ endorsements* Perform pre-planning before every trip* Perform communication with fleet manager via the Xata system * Maintain electronic logs via the Xata system* Perform basic preventive maintenance * Knowledge of weight restrictions and bridge formula and adjusting of tandem axles (if equipped)* Supervision of loading and unloading. Make sure product is loaded and unloaded correctly and all safety policies and procedures are followed* Knowledge of how to read shipping documents and manifests* Log miles and routes driven in each state for IFTA purposes* Create a Lone Star Transportation BOL for each load to be signed by consignee * Secure loads with straps and/or chains* Tarp and un-tarp loads (when required by customer)* Oversize, Over-deminsion, and Heavy Haul* Safe operation of specialized trailers (wind turbine blade trailers, stretch trailers, Four axle SLE trailers with booster, gooseneck trailers, drop decks, etc.)* Permits from various states dealing with OS/OD loads* Knowledge of laws in reference to OS/OD loads* Knowledge of port policies and procedures* Safe operation of heavy machinery (excavators, dozers, track loaders, etc.)

Gillette, Wy

* Perform safe operation of a commercial motor vehicle within the hours-of-service. guidelines of the FMCSA and DOT* Safe procedures for coupling and uncoupling of trailers* The most efficient way to manage time to maximize profitability to Mountain Peak Builders as a driver* Knowledge and compliance of CSA 2010 regulations * Perform Pre-trip and post-trip inspections and complete daily vehicle inspection reports.* Maintain Class A CDL w/ endorsements* Perform pre-planning before every trip* Perform communication with fleet manager via the Xata system * Maintain electronic logs via the Xata system* Perform basic preventive maintenance and repairs* Knowledge of weight restrictions and bridge formula and adjusting of tandem axles (if equipped)* Supervision of loading and unloading. Make sure product is loaded and unloaded correctly and all safety policies and procedures are followed* Knowledge of how to read shipping documents and manifests* Log miles and routes driven in each state for IFTA purposes* Secure loads with straps and/or chains* Oversize, Over-deminsion, and Heavy Haul* Safe operation of specialized trailers (wind turbine blade trailers, stretch trailers, Four axle SLE trailers with booster, low boy/RGN trailers, drop decks, dovetail trailer, belly dump trailers, side dump/double side dump trailers, etc.)* Permits from various states dealing with OS/OD loads* Knowledge of laws in reference to OS/OD and heavy haul loads* Knowledge of port policies and procedures* Safe operation of heavy machinery (excavators, pipe layers/side booms, front loaders, reach lifts, road graders, dozers, skid steers, tac rig, etc.)* Load trailers using a track hoe/side boom/reach lift/skid steer. * Safe operation of dump truck.* Moved dirt using a track hoe.* Limp Kobelco 290 track hoe on RGN trailer that was missing a track.* Removed mast from side boom for transport on RGN trailer.

Fort Worth, Tx

* Perform safe operation of a commercial motor vehicle within the hours-of-service guidelines of the FMCSA and DOT* Safe procedures for coupling and uncoupling of trailers* The most efficient way to manage time to maximize profitability to Lone Star Transportation as a driver* Knowledge and compliance of CSA 2010 regulations * Perform Pre-trip and post-trip inspections and complete daily vehicle inspection reports.* Maintain Class A CDL w/ endorsements* Perform pre-planning before every trip* Perform communication with fleet manager via the Xata system * Maintain electronic logs via the Xata system* Perform basic preventive maintenance * Knowledge of weight restrictions and bridge formula and adjusting of tandem axles (if equipped)* Supervision of loading and unloading. Make sure product is loaded and unloaded correctly and all safety policies and procedures are followed* Knowledge of how to read shipping documents and manifests* Log miles and routes driven in each state for IFTA purposes* Create a Lone Star Transportation BOL for each load to be signed by consignee * Secure loads with straps and/or chains* Tarp and un-tarp loads (when required by customer)* Oversize, Over-deminsion, and Heavy Haul* Safe operation of specialized trailers (wind turbine blade trailers, stretch trailers, Four axle SLE trailers with booster, gooseneck trailers, drop decks, etc.)* Permits from various states dealing with OS/OD loads* Knowledge of laws in reference to OS/OD loads* Knowledge of port policies and procedures* Safe operation of heavy machinery (excavators, dozers, track loaders, etc.)

Greater Atlanta Area

* Processed Purchase Orders* Processed and Followed up on Acknowledgements* Scheduled Pickups and notified warehouse* Knowledgeable about Shipping minimums and terms* Maintained a price increase and storage billing spreadsheet monthly

Greater Atlanta Area

* Expenses* Accounts Payable with suppliers* Utilized Piedmont's Accounting system Tiny Term* Utilized Excel, Outlook, Access, Word, PowerPoint* Utilized Chart of Accounts to determine different expense GL codes* Full Cycle Accounts Payable* Billing Drop Shipments* Familiar with Hold and Bills; Bill and Holds* Maintained Consolidation Spreadsheet and variety of other spreadsheets * Followed and escalated invoice questions

Within 23 Wards, Tokyo, Japan

* Scheduled training* Utilized the Standard Army Training System (SATS) program* Created memorandums for First Sergeant and Commander* Posted and maintained updated Army (USARJ and Postal) Regulations and Field Manuals* Made presentations for the General (Commander of the Post) utilizing PowerPoint* Participated in training meetings* Participated in planning for field exercises in Bangkok, Thailand and Kamakura, Japan.* Maintained training filing system of each soldier in unit* Additional duties to include unit armorer and ammunition clerk