Juan Rodriguez Email and Phone Number

• For Automation projects in BorgWarner Co. Hub Reduction machining line with Rockwell Allen Bradley CompactLogix PLCs, PanelView 7 Plus HMIs, Safety Controller Keyence GC 1000, VFD Powerflex, Ethernet/IP communication. • For Continental Co. service support for HUD TFT line with TIA Portal V15 and Servo Drives CMMT-AS Festo, Cognex Insight Explorer, Insight Vision Suite.

• Responsible FactoryTalk AssetCentre(ALM Asset LifeCycle Mgmt.), for Ciudad Juarez & Ziyang China Plants.• Improvement projects and support to Ciudad Juarez and Ziyang China plants, automated with Rockwell Allen Bradley CompactLogix PLCs, HMIs, and Cognex OCR and Vision Systems, VFD Powerflex and ABB ACH580, Servo Drives CMMT-AS Festo, Robot Cylinder IAI, IFM RFIDs, Ethernet/IP communication.• Inductive Automation Ignition SCADA system configuration. MySQL DB queries.

• Controls Engineer in projects like: for Jatco Co. Aguascalientes: -Connection of a Keyence Vision System with Omron PLC by Ethernet/IP for get measurements values -New Control Valve Re-assembling station CVT7 line, consisting of RFID system and Scanner readers, with Omron PLC.• For Gestamp Co, Aguascalientes: Implementation of a Remote-Control Driving System for a die carrier truck of 40 Ton capacity dies in the, the system is based on Allen Bradley Micro850 PLC and Phoenix Contact I/O wireless modules.• For KTMex Co. Aguascalientes: Automation of a Cutting Press in the consisting of Keyence Vision Systems, Cognex vision sensor, Allen Bradley Micro850 PLC, Allen Bradley Servo Drive Kinetix 300, all interconnected on Ethernet/IP network.

• Trained in the plants of Bosch in Blaicha and Immenstadt, Germany, to support the start of Production in Aguascalientes Plant the assembly line ABS9/ESP9.• Responsible as Controls Systems in the staff for the release of the assembly line ABS9/ESP9 in Bosch Plant in Souzhu China.• Responsible as Controls Engineer of the ramp up of the assembly line ABS9/ESP9 for Aguascalientes Plant with focus on: Controls (PLCs, Vision Systems, etc), Host System –Data and Application Host Servers- Promaster (Internal Bosch SCADA System worldwide) and MKS (Mortice Kern Systems MKS Inc. - Wikipedia. MKS Is a ALM -Applications LifeCycle Management- System used in this Bosch Division Worldwide). • Responsible of ESD systems (ElectroStatic Discharge).• Responsible of ITM (Information Technology in Manufacturing, i.e. Industry 4.0, IoT Internet of Things, Networking and connectivity security, Equipment Programs, Backups, product and process information, customer information-, Data Bases etc, ). Responsible for the Availability, Confidentiality and Integrity of the ITM data.

• Automation Integrator, for Daetwyler-Rubber Company in Silao Guanajuato: -Improving the purge (controlling by time and stroke distance) in the Rubber Molding Machines by an external PLC system -Improving the product inspection process by an external PLC system in the Rubber Molding Machines -Implementing a forced preventive maintenance schedule task using the same PLC from the Rubber Molding Machines• for FYPASA (Residual Water treatment plant in Leon, Gto.) in a FESTO project: -SCADA System commissioning -Automation of the Digester Valves sequence functionality• for CUMMSA (Tanner Plant in Leon City) Automation of the Washing Water filling system, Siemens S7 PLC• for Antolin Co,, Silao, Guanajuato, Program sequence adaptation of Molding Press Machine, Siemens S5 PLC • for Schaeffler Company in Irapuato, Guanajuato, Program sequence adaptation of Washer machine, Siemens S5 PLC

• Process Engineer, Responsible for the Release of the End of Line Stations in Thyssenkrupp EGM AG Installations in Langenhagen Germany, consisting of 2 Bench Testers for the Ford Fiesta Dual Clutch Transmission.• Responsible as Process Engineer of the release to the supplier Thyseenkrup EGM, the End of Line installation in Irapuato Plant, consisting of 10 stations, all of these from Thyssenkrupp EGM AG.• The gearbox assembled in this line, consist of 2 clutch system that reduce the combustible consumption because of the loss of the engagement is almost nothing and also the transmission power is like in the manual transmission (by gears) but for the user diver is like an automatic transmission, because the shifting is automated by a Continental controller. Also, the Clutching sequence program that in this project is from Luk Company, this have to be included in the Continental computer and Test Bench interface.• The Test Bench consists of the High precision mechanical system controlled by PLC, also includes the electronic and mechanical interfaces to command the transmission Test Sequence and also a Data Acquisition System called UPS32.

• Automation Integrator, for Continental, Las Colinas Silao Guanajuato: -Integration of new models’ recipes in the TMC Production Line with S5 Siemens PLCs -Integration of Visual Inspection System with cameras Cognex in TMC Production Lines with S7 Siemens PLCs -Connection of two separated Profibus networks in TMC Production line with S7 Siemens PLCs -Improvements in the process tracking System by a bar code tracking system in the A17 Production Line with S7 Siemens PLCs -Debugging and taking out models’ recipes in the Production Lines with S5 & S7 Siemens PLCs

• Responsible for the Automation and Semi Automation of Production Processes Industrial Engineer for the ABS sensor production lines. Project Manager for the Production Lines Commissioning, Management of Continue Improvements to the Processes applying the 5 S’s philosophy and 6 sigma projects as a green belt.• Initiator of the own Continental SCADA System, used to generate reports for scrap analysis and continue improvements projects.

• Automation Project Leader, of the Second Prototype Plant World-Wide, in the Consumer Care Division. The areas integrated in the Automation System are: Materials, Logistic, Services (Facilities), Production, SPC (Statistical Process Control), and Electronic Batch Record.• The Materials module, includes Ware House Management (Row Materials and Final Product), Traffic, and Materials Management, The Ware House Data Base was connected whit SAP System.• The Logistic module includes Production Planning and it is connected to an MAPICS ERP system.• The Services module has the following sub modules: HVAC, Fire Protection, Emergency Electric Plant Supply and UPS. The HVAC module controls the environment conditions inside the production lines rooms that are necessary to permit the start of production. That is done by PID’s controls configurable in the SCADA System.• The Production module includes the tracking and monitoring of production on the lines by batch.• The SPC module assures the Quality of the products adjusting or stopping automatically the productions lines when these are producing outside of the specifications.• The Electronic Batch Record module compiles in an electronic file, all the information concerning to the historical conditions in which the batch of the product was made, like the environment conditions, the receipts -containers- used, the start time of production, the final time of production, the interruptions of production and reasons, personnel that worked in the batch, and all this information have to be confirmed and signed electronically by the managers of: Quality, Production and Plant, and it have to be assured to not be modified after all the electronic signatures.• Validation of this SCADA System according to the FDA norms.

• For the Federal Electricity Company supplier (CFE), in the 11 y 12 project: XMAT Siemens SCADA System commissioning, I was trained in this system in Germany, from April to September 1998. This System Controls and Monitoring from the CENACE –a National Energy Control Center in Monterrey City-, 12 Electric Distribution Sub stations located among Mexico, including Cancun, Veracruz, Tampico, Acapulco, Mexico and Monterrey Cities. In each Substation was installed a Protocol Converter for the communication between Monterrey –Central Station- and all the Sub stations. Also, it was installed in each Substation a Local Control Panel (HMI) in order to have access to the Substation locally. The Particularity of these 12 new Electric Distribution Sub stations is that are encapsulated stations which are much smaller than the traditional ones, comparing the size, a traditional substation is like a football soccer field, and the encapsulated ones has a size around 3 by 2 by 2 meters.• For Cigatam-Phillip Morris, Mexico City, Automation of the Tobacco Dryer and Cutting Processes with Siemens PLC’s -S5, S7-400, Simocode- and Networks -ET-200, H1.• For Sicartsa a Steel Company in Lazaro Cardenas Michoacan, Modifying COROS Siemens System (HMI) • For Volkswagen Co. Puebla, Puebla, Programming Operational Panel OP27 (HMI) for the New Beetle’s Paint Module Process

• For the Treasure Governmental Office Mexico City, Development and Maintenance of Systems, (Visual Basic, Fox-Pro, MS-Access).• for Delphy Automotive Plant in Ciudad Juarez Development and Maintenance of Custom System (Cobol, Visual Basic)Courses: