Jyrki Laitinen work email
- Valid
Jyrki Laitinen personal email
- Valid
I am the Chemical Process Engineer who has acquired a strong experience in the operation and development of the international chemical manufacturing plant. I also have expanded the capabilities of mathematical and logical thinking in University studying, from which the Master's Degree in Applied Physics (flow technique). However I am the practical close observer, hands-on type. The tools I have used over the years include ISO9001, 14001, 45001, 50001, GMP, LEAN, SyncWare/SyncViz, MS Office, SPC, RCA, ZeroHarm. I am interested in what really happens inside different process equipment and how they really work. Experience has also been gained in daily manufacturing operations. For last few years, I have worked in the start-up of a new plant, where I have trained process operators, prepared SOP (standard operation procedure) and risk assessments for each process step. In addition, I have designed process equipment checking, cleaning and start-up instructions. I have been a part of the team who has decided on a process parameters and their variation intervals. I have also defined and acquired the consumable spare parts needed for production. Previously, I have worked in production support and development as well as troubleshooting in a multi-threaded chemical process. I understand the impact of a single process step on energy and cost efficiency as well as the performance of the entire production line. I am interested in the new application and development of technology. I would like to challenge myself to new things in the new destinations. I can read P & I diagrams and I understand the program images of the process automation system. ---- I am familiar with unit processes in chemical industry like: Digestion, Reduction, Clarifying, Crystallization, Precipitation, Hydrolysis, Filtration of solids and Cake washing, Drum filter, Horizontal Plate Pressure Filter, Dewatering filter, Slow-rotating Kiln, Calcination, Grinding, Milling: Hammer mill, Vertical Bead mill, Jet mill, Chemical Coating, Drying; Band dryer, Spray dryer, SpinFlash dryer, Dry Dust Separation (air and steam), Steam condensate, Energy recovery.
-
Process Development EngineerBasfUlvila, Fi -
Development EngineerBasf Apr 2021 - PresentHarjavalta, West And Inner Finland, Finland
-
Senior R&D EngineerVenator Materials Plc Mar 2020 - Dec 2020Pori Area, FinlandPlanning, implementation and reporting of full scale raw material and product test runs. Support for production technology and troubleshooting. Device technology support and technical documentation development. -
Senior Process Development EngineerVenator Materials Plc Apr 2017 - Jun 2019Pori Area, Finland- I did daily production support to achieve the quantity and the quality objectives. I was aware of what was going on in production so I could offer help right away.-I was a contact officer with an international group of Technology and Quality development experts to other locations. We had regular weekly telephone meetings and more often if needed.Projects I have been responsible for-I did the process design of post-fire end product manufacturing line using survived equipment as well as commodity and chemical requirement calculations for planned capacity. After that mechanical design would began. And subsequently I took the production line into stream and reported the start up of the new final product line. And I did yield and quality optimization of the new production line.-I did the process design of the calsination kiln startup after the fire and mass balance calculations and after that the mechanical design would start. I reported kiln’s startup to production, and I did the first raw material test run: plan, implementation and report.Keywords of my skills Chemistry, Innovation, Process development, Improvement, Troubleshooting, Problem solving, Full Scale Product Test Runs, Full Scale Equipment Trial Runs, Titanium Dioxide, Development, Quality, Quantity, Yield, Production Reporting, Energy
-
Senior Process Development EngineerRockwood Pigments (Now Huntsman Pigments And Additives) Sep 2013 - Apr 2017Pori Area, Finland- I did daily production support in the whole TiO2 plant (22 process phases) area to meet quantity and quality objectives. - I did troubleshooting in the whole production area to resolve quality and quantity disruptions: Precipitation, calsination, kiln, wet milling, jet milling dry milling, steam flow, dryers, wash filters, dewatering filters, coating, chemicals, crystal separation, reduction, settling - Design, implementation and reporting of factory test runs (new products, new equipment, new adjustments). - Development and optimization of the existing and new chemical processes at titanium dioxide plant - I was a contact officer with an international group of technology and Quality development experts to other locations. We had regular weekly telephone meetings and more often if needed.Projects I have been responsible for- After fuel exchange of the kiln’s quality and adjustment values monitoring and reporting - Collection of data for modelling the kiln flue gas cooling.- I collected data and made calculations of the typical yield in special products in the end-product line This gave GMP validation comparison data.- I built the Energy Standard (ISO50001) Calculations, (process-specific reports, nominal consumption reports), co-operation with Energy Manager.- I enhanced kiln’s feed filter’s performance to get kiln’s quality better- End-product milling (jet mill) new adjustment system: plan, implementation and reporting.- I improved energy efficiency with calsination kilns.- I collected data and made calculations to enhance yield in production.
-
Technology Development ManagerSachtleben Pigments Oy Sep 2008 - Sep 2013Pori Area, Finland- I did in the whole TiO2 plant production support for the achievement of the target and quality objectives. - I did troubleshooting in the whole production area to resolve quality and quantity disruptions: Precipitation, calsination, kiln, wet milling, jet milling, dry milling, steam flow, dryers, washing filters, dewatering filters, coating, chemicals, crystal separation, reduction, settling - Development and optimization of the existing and new chemical processes at titanium dioxide plant - Design, implementation and reporting of factory test runs (new products, new equipment, new adjustments ). Projects I have been responsible for- I did the study of the process water formation in the factory. On-line report from different verses.- And the formation of rainwater in the factory area: the collection, handling, quantity and sensitivity of quantity and purity.- The formation of used, clean cooling waters at the factory, quantity and sensitivity analysis of volume and purity, on line report- Study of treatment chemicals consumption, cost statement, self-manufactured price versus purchase price.- Study of raw material consumption in higher capacity production- I created electricity consumption forecasting tool for production people.- I made electricity consumption report in different process phases.- Development of measurement and reporting of compressed air consumption- District heat balance update in the factory area (Work Group)- Development of kilns control (automation) together with the automation designer, operators training.- Full scale product factory trial runs, plan: implementation, reporting. -
Technology Development ManagerKemira Pigments Oy Apr 2005 - Sep 2008Pori Area, Finland- I did the whole TiO2-plant area production support for the achievement of the target and quality objectives. - I did troubleshooting in the whole production area: Precipitation, calsination, kiln, wet milling, jet milling dry milling, steam flow, dryers, washing filters, dewatering filters, coating, chemicals, crystal separation, reduction, settling - Development and optimization of the existing and new chemical processes at titanium dioxide plant - Design, implementation and reporting of factory scale test runs.- Production development and survey projects: as a member of the Working Group and as the team leader role.Projects I have been responsible for- I resolved the capacity and wearing problem of jet mills. - I resolved serious and long-term calcination kilns quality problem which was caused by new feed filters.- I was as Project Manager: Plant’s energy study, compressed air network mapping, Production modelling. - Pre study of capacity expansion in the factory- I did capacity expansion calculations in the feasibility study- I did production, cost and energy reporting to production management and manufacturing departments.
-
Production ManagerKemira Pigments Oy Jan 2003 - Mar 2005Pori Area, FinlandDevelopment of performance of TiO2 plant's Black End together with the Operations Manager and project Department
-
Operations ManagerKemira Pigments Oy Apr 2001 - Dec 2002Pori Area, FinlandResponsible for production in Black end department at TiO2 plant. Responsible for the daily quantity and quality meet the targets and also the staff development. The Department's HSO and environmental responsibilities included as well. The Department consisted of 7 supervisors and about 120 process operators.
-
Project Planner / Project EngineerKemira Pigments Oy Sep 1994 - Apr 2001Pori Area, FinlandMy function was to be a link between production and project department. - I described the operation of the process to the automation planner. - I did commissioning to the revamped processes. - I trained operators to do their old job with automation system. I was involved following processes: jet milling and dust cleaning and steam condensation and heat recovery (4 individual, unique lines). Band dryer lines, spray dryer lines, drum filters, coating lines, wet milling lines, bead mills, dry milling lines, hammer mills, dispersing lines, filtration and cake washing and handling of filtrates, precipitation lines, hydrolysis, horizontal plate pressure filter equipped production line.- I was a member of the group who developed the plant¨s process reporting system.
Jyrki Laitinen Education Details
-
Physics
Frequently Asked Questions about Jyrki Laitinen
What company does Jyrki Laitinen work for?
Jyrki Laitinen works for Basf
What is Jyrki Laitinen's role at the current company?
Jyrki Laitinen's current role is Process Development Engineer.
What is Jyrki Laitinen's email address?
Jyrki Laitinen's email address is jy****@****ail.com
What schools did Jyrki Laitinen attend?
Jyrki Laitinen attended University Of Jyväskylä, Satakunta University Of Applied Sciences - Samk.
Who are Jyrki Laitinen's colleagues?
Jyrki Laitinen's colleagues are Kevin Medine, Sabine Martin, Ashok Nambiar, Florian Garlichs, Javier Arellano, Tracy Thibodaux, Christopher Virik.
Not the Jyrki Laitinen you were looking for?
-
1softprog.fi -
1finnair.com -
Jyrki Laitinen
Helsinki -
Jyrki Laitinen
Finland
Free Chrome Extension
Find emails, phones & company data instantly
Aero Online
Your AI prospecting assistant
Select data to include:
0 records × $0.02 per record
Download 750 million emails and 100 million phone numbers
Access emails and phone numbers of over 750 million business users. Instantly download verified profiles using 20+ filters, including location, job title, company, function, and industry.
Start your free trial