Kevin Tsoupis Email & Phone Number

Houston, Tx, Us

Internal/external inspections of equipment/pipingReport writingRisk Based InspectionsFlare inspections using a UAV.Incinerator inspections using a UAV.Internal piping inspections using a UAV.

La Porte, Texas, Us

Inspection of pressure vessels & exchangers.Inspection of piping and components.Inspection of welds.

Princeton Junction, Nj, Us

• Performed External/Internal Inspections.• Visual Inspection of Fit-up/Welds.• Inspected Code work.• Inspection of Flange face repairs.• Verification of Bolt-Ups.• Witnessing of hydrostatic testing.

• Initiated QA/QC Program for Oneok gas plant.• Shepherded weld test for welder to meet requirements governed by pipe specs.• Devised ITP based on engineering drawings, Isometrics, and project requirements.• Inspected small and large bore carbon steel piping under ASME B31.3.• Secured hold points for NDE set forth by pipe specs and project requirements.• Chronicled Weld Log, Weld Maps, and NDE for the project.• Scoured project work progression for deficiencies and non-conformance issues.• Channeled all MTR’s and mapped heat numbers for materials used on project.• Aggregated documentation for final turnover packages.

La Porte, Tx, Us

• Inspected piping, Exchangers, Drums, and Tanks.• Verified dimension checks for root opening, weld size, and spool length.• Scheduled NDE performed on piping, continuity logs and weld maps for welders.• Coordinated with client QA in regards to hold points and completed work.• Monitored Hydrostatic & Pneumatic testing on piping and equipment.• Secured hold points for code packages.• Prioritized audits for material control and adherence of WPS, codes & standards.• Performed Penetrant testing on piping and equipment.

La Porte, Tx, Us

• Inspected piping, Exchangers, Drums, and Tanks.• Verified dimension checks for root opening, weld size, and spool length.• Scheduled NDE performed on piping, continuity logs and weld maps for welders.• Coordinated with client QA in regards to hold points and completed work.• Monitored Hydrostatic & Pneumatic testing on piping and equipment.• Secured hold points for code packages.• Prioritized audits for material control and adherence of WPS, codes & standards.• Performed Penetrant testing on piping and equipment.

Baton Rouge, La, Us

• Worked hand-in-hand with the onsite QA/QC manager and assisted with documentation for the job.• Built QC hydro packages and turnover packages for system areas.• Devised spreadsheets to facilitate in data entry that streamlined the process.• Located MTRs, underground piping documentation, and NDE reports for packages.• Married MTR and NDE reports with turnover packages.• Audited turnover packages for errors and missing documentation.• Worked directly with field QC and supplied necessary inspection forms and reports.

La Porte, Tx, Us

• Inspected piping, Exchangers, Towers, Drums, and Tanks.• Monitored code welding work performed and documented progress.• Strategized optimal NDE progression performed on weld jobs.• Mechanical inspections carried out for gasket installation and bolt-ups.• Monitored Hydrostatic & Pneumatic testing on piping and equipment.• Secured hold points for code packages.• Audited for material control and adherence of WPS, codes & standards.• Performed 3rd party inspections for final approval for quality of work performed.

La Porte, Tx, Us

• Inspected piping, Exchangers, Towers, Drums, and Tanks.• Verified dimension checks for root opening, weld size, and spool length.• Harmonized NDE performed on piping, continuity logs and weld maps for welders.• Coordinated with client QA in regards to hold points and completed work.• Monitored Hydrostatic & Pneumatic testing on piping and equipment.• Secured hold points for code packages.• Tested welder for Inconel WPS.• Prioritized audits for material control and adherence of WPS, codes & standards.• Developed QC job packages, Code packages, and Hydrostatic/Pneumatic test packages.

San Antonio, Tx, Us

• Inspected piping and structural steel for capital projects.• Verified dimension checks for root opening, weld size, and spool length.• Harmonized NDE performed on piping, continuity logs and weld maps for welders.• Engineered a practical and functional Weld Tracker for the site.• Monitored Hydrostatic & Pneumatic testing on piping.• Secured hold points for Chrome and Stainless H grade piping jobs.• Prioritized audits for material control and adherence of WPS, codes & standards.• Developed QC job packages and Hydrostatic test packages.

• Implemented the QA/QC program as directed by the Corporate QA/QC Director.• Developed and instituted the ITP based on engineering drawings, Isometrics, and project requirements.• Inspected small and large bore stainless/chrome/carbon steel piping and structural steel under ASME codes: B31.3, Section VIII Division 1, Section IX, and AWS D1.• Formulated on excel spreadsheets for weld trackers, continuity logs, NDE percentile, and S curves for document control records.• Kept track of weld logs, weld maps, NDE percentage, deficiencies, Weld Procedure Specifications, and Weld Procedure Qualifications.• Audited project conditions for quality conformance and concerns, coordinate the NDE schedule, communicate with the client concerning quality requirements.• Coordinated meetings with the production department supervision to address quality concerns and deficiencies. • Directed and supervised inspectors relating to inspection activities, report overall status of the quality of the project.• Reported project’s quality status to Corporate QA/QC Director. • Supervised inspectors relation to inspection activities and act as liaison between the contractor and the Authorized Inspector for Boiler Code work.

• Performed all inspection activities for small and large bore piping, structural steel, and civil activities. • Witnessed various tests to verify the integrity of piping systems. • Documented weld maps and NDE for piping for refinery and shop work.• Issued non conformance slips to field supervisors so corrective actions could be taken.• Supported QA/QC management by reporting deficiencies so corrective actions could be issued.

• Performed all inspection activities for small and large bore piping, structural steel, and civil activities. • Witnessed various tests to verify the integrity of piping systems. • Documented weld maps and NDE for piping for refinery and shop work.• Issued non conformance slips to field supervisors so corrective actions could be taken.• Supported QA/QC management by reporting deficiencies so corrective actions could be issued.

• Spearheaded the implementation of the QA/QC quality program, directing site activities involved with piping, pressure vessels, and structural steel and managed the NDE deficiencies. • Collaborated with the production department so that any non conformance issues and deficiencies could be addressed and corrective actions taken to ensure that the work met the high standards of quality while increasing productivity by eliminating re-work. • Carried out random audits on material control and consumable storage to prevent the compromise of material/consumable integrity.• Supervised on-site QC personnel and directed QC activities carried out for QC work scope.• Composed Inspection Test Plan for both piping and building work scope, inspected in stainless and carbon steel piping, and generated all documentations. • Weld mapped all welds and captured all flange connections for piping.

• Implemented the quality program as well as directing all shop activities involved with module piping. • Identified nonconformance and deficiencies and conducted meetings with the production department to ensure that the work met the high standards of quality while increasing productivity by eliminating re-work. • Audited materials and consumable storage to prevent the compromise of material/consumable integrity.• Tracked welds for over 900 spools for module piping as well as maintained welder percentage for each line class and welding process.• Assembled job packages for all module piping which included ABSA forms for transporting piping across Canadian border, MTR documentation, dimensional reports, and spool certificates.• Transmitted all NDE, Inspection reports, and Weld logs on Technip system as well as SAM systems.• Maintained MTRs on both piping and all fittings used for module piping.• Oversaw Spool certifications, CAR (corrective action reports), and NCR (non conformance reports) reports.• Inspected both visually and dimensionally for all piping spools.

• Performed all inspection activities for small and large bore piping, pressure vessels, and structural steel. • Prepared Weld and Flange Map's for process piping and equipment.• Conducted pneumatic tests and service tests to verify the integrity of piping systems. • Supported QA/QC management by reporting deficiencies so corrective actions could be issued. • Followed up on deficiencies/ nonconformance items to ensure corrective actions were taken to ensure the overall quality of the project.• Enforced hold points for PWHT on chrome piping and heater tubes.• Inspected under ASME codes: B31.1, B31.3, Section VIII Division 1, Section IX, and AWS D1.1.

Drone Pilot, Small Unmanned Aircraft Systems

Api 510 & 570

96 Hr Certificate Of Completion, Cwi

Certification, Commercial Ac/Refrigeration

Diploma, Academics

Part 107 Remote Pilot