Kameron Manyrath Email & Phone Number

Vancouver, Wa, Us

Vancouver, Wa, Us

Massachusetts, United States

Worked on projects with different GCs (Gilbane, Columbia and Shawmut) and trades to resolve clashes and meet delivery schedules. Used smart sheet for schedules, blue beam studio for markups, Procore for resolving clash issues/submitting RFIs, Navisworks for clashes with other trades. Used eVolve for exporting trimble points and fabrication.

California, United States

Modeled electrical systems.Set up teams meeting and flew through models to locate clash points.Updated revit families. Used Navisworks and Bluebeam studio to coordinate and process markups.Used Procore, Bimtrack, Smartsheets and Tello on several projects.

Vancouver, Washington, United States

• Created conduit runs and added trapezes, minerallac supports where needed.• Setup Navisworks models, performed clash detection and coordinated with other trades.• Determined conduit info – destination, origin, wire size and circuit numbers.• Created schedules to capture conduit info.• Created filters to isolate conduits with missing information on floor plans.• Used Autodesk Point Layout to assign trimble points and export points to trimble tablets.• Modeled typical electrical components – lights / j-boxes / devices / fixtures / equipment, busways and support racks.• Used Bluebeam Extreme to print and perform markups.• Routed conduits based on panel schedules and one-line diagrams.

Vancouver, Washington, United States

• Setup Revit projects – created sheets, views and details. • Setup Navisworks models for various projects, perform clash detection and coordinated with other trades• Updated lighting families with advanced hanging rod and trimble points• Created spool templates to capture BOM, cut list schedules for conduit runs, cabletray runs and trapeze• Created smart underground conduit racks that could be scheduled• Created a spool template that will automatically generate a sheet complete with 3D view, BOM and schedules• Modeled cable trays, conduits and their supports - minerallac, trapezes and flextray hooks• Created Revit schedules for pre-fab shops to build from - including conduit bends/trapezes and other supports• Used Bluebeam Studio and Revue to perform markups and generate sheets• Created smart families that will pitch and roll to accommodate all angles• Developed standard operating procedures and wrote how-to instructions on Navisworks Freedom/Manage• Updated Revit models and created red/greens in Bluebeam to determine the differences between existing and new background• Created smart families for electrical devices, fixtures and support systems• Implemented procedures for trimble within the model and exporting the points out to be imported into the trimble tablet

Portland, Or

• Revit lead duties: Setup Autocad/Revit projects – created sheets, views and details. Updated Revit models and created red/greens in Bluebeam to determine the differences between existing and new background• Used Navisworks daily to perform clash detection and review models• Updated lighting circuits, lighting fixtures in lighting reflective ceiling plans• Created 3D views, section views and drafting views in Revit MEP• Routed underground/overhead conduits and placed electrical equipment and devices in model• Modeled underground conduit racks - with strut and clamp fittings• Modeled EMT conduits per panel schedules• Modeled ducts, cable trays, conduits (above and below ground)• Modeled trapezes and conduit/cable tray support racks• Created/revised plans, sections, and details • Performed first line quality assurance review of drawing package • Coordinated project drafting schedules with design engineers• Created Revit schedules for pre-fab shops to build from• Used Bluebeam Studio to perform markup or to add engineering stamps and signatures onto pdf documents• Created smart families that will pitch and roll to accommodate all angles• Developed standard operating procedures• Created smart families for electrical devices, fixtures and support systems• Implemented procedures to help with the trimble process prior to the pouring of slabs

Portland, Oregon Area

• Revit lead duties: Setup Autocad/Revit projects – created sheets, views and details. Updated Revit models and created red/greens in Bluebeam to determine the differences between existing and new background• Updated lighting circuits, lighting fixtures in lighting reflective ceiling plans• Created 3D views, section views and drafting views in Revit MEP• Routed underground conduits and placed electrical equipment and devices in model• Modeled ducts, cable trays• Created/revised plans, sections, and details • Performed first line quality assurance review of drawing package • Coordinated project drafting schedules with design engineers• Created titleblock and smart families with connection points in Revit• Used Bluebeam to add engineering stamps and signatures onto pdf documents

Drafter/Designer 2014 - 2015Automatic Fire Sprinkler - Vancouver, WashingtonCreated site plans, floor plans with apartment units and garagesIdentified ASMEP components to be imported into a floor planCreated 3D iso drawings in AutosprinkCreated pipe lines, fixed leakages, updated sprinkler heads per zoneUpdated system drawings based on as-builtsCreated standpipe (STP) drawings for garages and apartment buildingsProgrammed macros on razor keypads to facilitate the design processCreated a sway brace calculation spreadsheetCleaned Autosprink drawings, stocklist and steel/copper fabrication.Accomplishments - reduced drafting time and saved company money by:2. programming macros on razor keypads to facilitate the design process so team members could perform their work quickly by not needing to read and follow the outlined 30+ step procedure3. creating a sway brace calculation spreadsheet that calculates the number of braces to place and the distances between them based on the total distance of the sprinkler main line

Worked as a Life Safety and Instrumentation CAD Lead at Rondler Acre site. Created/maintained/updated routines for the project. Performed QA/QC on drawings to ensure cad standard compliance. Assembled packages and created electronic archives per client standard. Worked also as a CAD coordinator. Created revision block insertion routines for the project team to use. Created/updated project cad deliverables, including master package list. Worked closely with DMS to get standard issues answered and documented. Helped with project cad instructions for team drafters/designers/engineers to follow. Trained/mentored drafters to become a productive members of the team. In addition to Autocad, I also have worked with in 3D and have modeled equipments and ran conduits, cable trays as well as created multiple views, schedules and sections using Revit MEP 2013.Used Autocad 2013, Revit MEP 2013 to perform work.Accomplishments - reduced drafting time and saved company money by:4. writing a lisp routine to swap out consultant borders with company border, while transferring the titleblock attributes (and revision block with current date) to eliminate the need to manually copy/paste attributes from one drawing to the next. What would normally take 10 minutes to do, the routine does it in 10 seconds. We had nearly 1000 drawings to issue for the package5. creating and maintaining a project lisp routine for all disciplines to use to bring in new borders or new revision blocks or to add project layer modifiers to the entities through the LAX command. This allows everyone to concentrate on their design instead of having to manually create new layers and add in the project layer modifiers, the routine allows you to pick an object and it creates a new layer with the project modifier as a suffix.6. Stepped up and accepted a role as Project CAD Coordinator for 6 months

Exercised control over company documents and drawings; issued new filenames that conform to ICS (Intel CAD standard).Ensured efficient handling of document and drawing requestsMaintained and updated facility system drawings though a spreadsheet or databaseUpdated system drawings per system owner's instructionsEliminated data entry errors through the use of macros and excel programmingUsed Autocad to perform work.Accomplishments – improved the look and effectiveness of evacuation maps by:7. Introducing a two-color scheme - red and green (primary and secondary) evacuation routes to black and white emergency evacuation maps on all of Intel campuses. In addition, I verified each routes and eliminated some routes that were blocked by cabinets or equipments.

Designed the following components of an automobile facility: vehicle parking bays (45 and 90 degrees), truck parking and haul-away road, railway system with multiple support tracks and loading pads, site entrances, guard houses and security fencingsDesigned an administration building floor plan with employee parkingCreated schematics and building elevations and prepared packages for presentationsCreated and implemented layering standard and updated existing block attributesSimplified the drafting request process by creating a design request form that could be filled out and submitted electronically via e-mail or through a LAN file transferUsed Autocad 2004 to perform work.

Geodesign

Created roadway alignment stationing and contours from point files and or tin entitiesCreated parcel boundary, road alignments, profiles and section views Created drawings from aerial images translated into real state-plane coordinate system as well as provide a world file to accompany that image for precise mappingImported and exported point data to and from GPS units into drawings through either Northing and Easting or through Latitude and Longitude coordinatesCreated cross sections and exported gINT bore log sticks to show the contact points along with the various USGS hatchingsImplemented and revised GDI Drafting standard by creating routines that auto generate layers and set up drafting environment so that the styles are automatically created and the dimension variables are set to the scale of the drawingImproved the drafting process through the use of a self-updating stamp block that auto inserts and rotatesUsed Autocad as well as Microstation to perform work.

Created site drawings, detail sections and PID drawingsCreated cross sections to scale and used associative dimensioning to illustrate true distances in the model space viewPrepared drawings for bid packages and provided computer support for the officeDeveloped, designed and implemented SECOR Cad standard by creating all blocks, symbols, title blocks and borders including revision blocks as well as templates to improve the drafting process for the entire companyUsed Autocad to perform work.Accomplishments:8. Developed, designed and implemented SECOR Cad standard by creating all blocks, symbols, title blocks and borders including revision blocks and templates

Created plan sheets, prepared submittal packages and drafted one-line/schematic diagrams, details and schedulesCreated site/partial plans and elevation drawings as well as created a BOM tableWrote scripts to identify and purge drawings of corrupted and/or unused informationMaintained and updated flat/stick filesEnsured compliance of the layering system per company or client standardSet and conveyed CAD standard as well as maintained drawing databaseUsed Autocad to perform work.