Ian Macmoy Email & Phone Number

Cypress, Tx, Us

Houston, Texas, United States

For the past 7 years (2014) I have been working on correlating the issues of surface modifications into one complex solution. Which would solve for the variables we currently find ourselves dealing with. Torque inaccuracy, hydrogen stress cracking, failure of coatings, both application and service life. So I developed a patented process last year that provides a hardness, a consistent wear pattern, does not rely on polymer thin films, and is corrosion resistent. Instead of using polymers we use a solid metallic surface alloy as our anodic oxide lubricant, corrosion, wear barrier, hydrogen stress cracking deterant, and even a tensile protective. Currently being approved for PCT globally and then licensed. Samples will be available by the end of June 2021, for individual testing. Right now we have measured a .13 coefficiency of friction, HRC 58-62(*) in the Zeta, corrosion tested has beaten out HDG, elector Zn-Ni plating, with no signs of red rust, about 3500 salt spray hours so far. We plan to have over 100 different processes and customizable procedures that we will provide as a service and customize as a licensed application along with equipment and oversite of in-house applications.

Houston, Texas, United States

The Intermetallic Layer used with Alteriver (Majorpack) helps protect the substrate by applying a thermal growth alloy by thermal diffusion. Creating a vaporous-solid alloy with an OCP = -.850mV , creates a hydrogen cell barrier that suffocates the substrate lattice and disallows hydrogen bulging, hydrogen cell formation from wear or impact. Thermal Diffusion creates alloys in a very special way, in which we retain the substrates properties while adding new alloys and new properties at the same time.

Houston, Texas, United States

We test materials and sell documentation for the test requests.

Cypress, Tx

One of the biggest variables that plague OEMs is their coating and plating vendor, the reason this is comes from hiring off the street and treating applicators as an unskilled labor. Nothing could be further from the truth. Constant training, repetitive processes and planned action with technical authorization has to be available and audited as such. I know there is a lot of work out there that needs to be done correct the first time. Also there are new solutions we need to keep pushing forward and replace the failed and old ways of doing things. Where is your First Article?

Houston, Texas Area

It has been 7 years now since I started focusing on the trials and tribulations of bolt failure, bolting dimensions, tribology of coatings and platings, Hydrogen Embrittlement and Stress Cracking. In that time we have deducted many reasons for failure in not just bolting but in metallurgy and surface tension of metals. It is now time to put what we have learned into action and drive solution. With the help of Wurth and its global supply chain, I see us succeeding on a grand scale and fulfilling the needs of the industry laid down by API. Oil and Gas is international and if you are going to supply a solution you have to have a supply chain partner that is international and with a strong presents in the region you are operating in. Wurth is in over 84 countries and has over 7,700 employees and has been in business since 1946. Supplying industries around the world with the solutions they find right here at home. In the last five years, we have started to tackle new metallurgy in Additive Manufacturing API20S and adding those solutions to our Kanban, VMI, fasteners solutions to give a complete part to the field. Specializing in replacement parts for emergency situations and erasing downtimes.

The Woodlands, Tx

• Designing production around a risk assessment product. Actually removing the variables from a product through redesigning its production, by accounting for risk development.• Develop broad networks of alliances with others while solving some of the largest issues facing Oil and Gas. (NACE, ASTM, ASME/ ANSI, API, ISO).• Writing ASTMs, Coating Specs, White Papers, Symposium Papers, running tests and developing gap analysis for uncertain measurements in thin film applications and alloys.- Consulting with End Users as to what they need based on field knowledge and research of environmental corrosion, joint flange evaluation, materials and byproducts developed during the life cycle of fastener or tool.• Defining 'Special Process' as a 'normative reference' that can not be easily measured, or controlled with accuracy. Our only reference is by 'Gap Analysis' of past applications, which are highly variable. These processes have little to no accountability if not properly documented in measurable processes indicated in Purchase Orders.• Working with chemical, mechanical and metallurgical adhesion in fasteners.• Hydrogen Embrittlement Forum for 2015; brings the whos who in the O&G to deal with the problems we are facing in subsea fasteners. Contact me to know more. NACE, will be addressing the issue to be taken up with ASTM. We discuss material selection of fasteners in sub sea environment and the defining measures for internal H.E. and external H.E.• No torque, tensile only measurements. Ask me why?

Magnolia, Tx

Surface preparationOEM Commercial specific coating processesCoating Engineering and Corrosion Engineering is what I specialize in. ASTM coating systems, problem solving, and metallurgy reactions in processing,procedures inline with ISO standards.Worked on anything to do with surface treatments, coatings cures. Chemical, mechanical and metallurgical bonds. • Sets goal, monitor work, and evaluate results to ensure that departmental and organizational objectives and operating requirements are met and are in line with the needs and mission of the organization. Held 70-80% of all sales.

Aldine-Westfield, Houston, Tx.

Started Sigma Custom Coatings with Pedro Alcaraz and Judy Jandel in January of 2011. I brought in and developed six OEMs all within 4 months of opening our doors. Making the company profitable in less than three months! The Parent company worked mainly in fasteners, where I gained a great deal of knowledge in ASTMs. Offered the OEM industry a choice when it comes to Sermagard applications, high detailed multiple coatings, subsea cathodic coatings, H2S and CO4 protective coatings. Not to mention Fluorocarbon development, new PTFE, PPS, PEEK, PAI, FEP applications and pipe coatings for corrosive environments. Successfully developed greater adhesion rates for rubber and thermoplastics by 39%.I also worked in metallic plating where we were applied tri-zinc, worked with mechanical zinc and thermal diffused zinc for atmospheric solutions.Held 70% of all coating sales.

Houston, Tx.

T3 Energy Services sold to Robbins and Meyers off Ardmore, Houston TexasWork together with vendors to bring the cost and the quality of coating applications to Houston and it's surrounding industries. Working with both commercial and industrial protective coatings, such as Sermagard, Teflon, Xylan, Ryton/ PPS, zinc phosphates and proprietary coating solutions. On a quick turn bases for the service industry out of Houma, LA and new productions in Houston, TX. My job was to not only develop new business but to: Price products; designate coating and application thicknesses in relation to the market. This entailed me to know the operations of each coating application, lifting capacity, hazardous waste costs, operational expenses and overtime costs.

Houston, Tx.

Industrial Outside SalesQuality Product Finishing, INC.June 2008 – September 2009 (1 year 4 months)Developed a better knowledge of the importance of ISO 9001, audits to operators and OEMs.Worked with a number of different industries and commercial corporations on the education of surface preparation,powder coating and PTFEs uses in atmospheric/ sub-sea/ splash/ field environments.

South Houston, Tx

Developed a better knowledge of the importance of ISO 9001, audits to operators and OEMs. Worked with ovens and processes , maintenance requirements on equipment and learned to plan for outages.Worked with a number of different industries and commercial corporations on the education of surface preparation, powder coating and thermal cure powders uses in atmospheric/ sub-sea/ splash/ field environments.

Cypress, Tx.

January 1992 – May 2003 (11 years 5 months) • Directed projects from concept to fully operational status. (Refurbished office panels, cubicles, aluminum wall panels, pallet rack and wide span shelving) (5 years in powder coating) • Developed and Directed production of refurbishing office cubicles, interior wall panels, pallet rack and wide span shelving for health-care offices, property management, legal clients and O&G companies through out Texas, Oklahoma and Louisiana. • Began refurbishing oil and gas equipment from valve manufactures in bankruptcy.

Rice Village, Houston

Lived a dream and enjoyed every minute of it.