Alteration and renovation workplan for the Oil Terminal Rehabilitation Project -Aqaba (JORDAN)The current task is to inspect , evaluate and correct all the piping and pipeline systemconsisting of supervise the DT\NDT examination process , share the interpiritation process, supervising the rectification workplan as per ASME and scoop of work specification.

Accomplished Mechanical Engineering with extensive experience in the design , execution , Supervision and management of a wide range of mechanical installation related to industrial , infrastructure and building projects, inclusive of their plumbing , firefighting and HVAC SystemsWide experience of piping and pipeline fabrication , fitting , material selection, erection, installation, testing and commissioningTypes have included Carbon Steel - low Temp - High Temp - Stainless steel - GRP - HDPE , etc.

- King Abdullah Bin Abdel Aziz Extension for the Holy Haram, Saudi Arabia. Supervision ofconstruction for an extension to the Makkah Holy Haram to accommodate additional800,000 worshipers, comprising a new building of 4 praying levels with a capacity of300,000 worshipers, connected at its ground, first and roof floors to the First SaudiExtension of Makkah Haram, and includes a basement level for electromechanical services;state-of-the-art technology in natural and artificial climate and lighting controls; security,crowd management, and sound distribution and control systems; structural healthmonitoring sensors; cleaning equipments; interactive signage; and high end interiorfinishing works. The project provides internal courtyards covered with 12 operable skylights,6 fixed ones, 4 fixed domes of 18 m diameter each, and one 36 m diameter sliding domeabove the 24 m wide and 26 m high ceremonial spine connecting the north and southpiazzas through a 59 m wide main gate at the north end flanked by 2 new minarets (135 mhigh each) on its left and right sides and a 30 m wide gate at the south end. The projectalso comprises 194,000 m² external praying piazzas accommodating 314,000 worshiperswith 2,500 toilet cubicles and 850 ablution points beneath them; a service building of 6overlapped radial steps accommodating 8,750 toilets, 5,370 ablution points, 2 helipads,service and solid waste management facilities, authorities’ offices and a 110,000 m² prayingarea at its roof level for 165,000 worshipers; several bridges (total of 42,750 m²) linkingthe new building to the service building and to the Holy Haram; a service road below theexternal piazzas and dedicated service culverts carrying all infrastructure utility networks.

- Mataf Project, Saudi Arabia. Supervision of construction for the increase of Mataf capacityup to three times its original capacity. The scope covers the removal and demolition of theold arcade and the first Saudi Expansion (except for the gates), and the construction of a 7-level new extension connected to the Masa’a area as well as to the second and third SaudiExpansions, with all related electromagnetically and infrastructure services, and provisions forthe handicapped and elderly visitors. The project also includes the rehabilitation of Zamzamarea with relocation of existing services.

King Abdul Aziz International Airport, Saudi Arabia. Supervision of Construction, projectmanagement, design review (according to LEED requirements), construction managementand supervision for a new airport based on a new phased master plan up to the year 2035(Phase 1 up to 2012), comprising a new passenger terminal complex (670,000 m²) with acapacity of 30 million passengers per annum to replace the existing North and SouthTerminals; facility design to cater for both domestic and international operations, A380aircrafts and full hub capability with latest systems and equipment; integrated provision fora planned railway station and an automated passenger mover (APM); airfield upgrading,new parallel taxiways, control tower and related systems; state-of-the-art navigation aidand communication installations, FIDS, departure control, life safety aspects and publicaddress systems; Baggage Handling System (BHS), support buildings and facilities,earthworks, complete landscaping, major utility networks, new landside roads, tunnels andinterchanges; programme coordination for related projects, including fuel tank farm, Jet fuelsupply line from Aramco to the fuel farm, Jet fuel hydrant network, desalination plant,upgrading of existing terminals, sewage treatment plant; and planning and infrastructureand earthworks for a major landside commercial zone, complementing the maindevelopment. Tasks also included noise and air quality modelling.

• Oversee and manage the design, installation, construction, operation and maintenance of the following:water supply systemssewerage systemsPlumbing Systemfire suppression systems/ pumps / Chillers / Boilers / Fuel systems.Piping Supports - Steel Works , Platforms , Steel Frames Fabrication• Responsible for testing, sampling, inspecting, certifying and reporting in accordance with United Kingdom / European and United States mechanical standards also Related to NFPA Standards.• Manage a team of Plumbers to ensure all work is installed to the highest standards in accordance with the applicable of mechanical plumbing standards.• Manage the procurement process for all mechanical plumbing materials and tools required. Responsible for theinspection, maintenance, and security of all tools, equipment and personal protective clothing and shall be responsible for conductingan annual inventory of the same.• Work involves a large degree of responsibility with considerable independent judgment. Required to work a variety of hours to repairmechanical systems, pumps, valves , piping , fittings Alignment• Maintain drawings and documentation for all existing and new components of the mechanical / plumbing systems.• Develops, establishes, recommends and enforces safety practices applicable to mechanical systems. Maintains current knowledge of• Develops, establishes, recommends and enforces safety practices applicable with mechanical / plumbing systems.--------------------------------------------------------------------------------------------------------------------------------ResponsibilitiesThe MEP Engineer is responsible and accountable for (but not limited to) the following:• Manage the design processes required to complete the design of new mechanical / plumbing installations includingwater and sewerage installations, fire suppression installations, fuel installations, HVAC systems, electrical generation farms,

• Communicate work instructions concisely and accurately• Knowledge transfer and train-the-trainers of the installation team• Providing inputs to discipline annual performance appraisal to the discipline manager• Maintain a strong work ethics, understand teams’dynamics, and adjust behavior to gain maximum advantage of work performance.• Understanding the contractual requirements according to the work scope-of-work, and managing changes according to the project development• Ensuring project implementation is to fulfill the quality assurance objectives within budget constraints and work schedules• Providing technical leadership to ensure technical adequacies are compliant with respect to the technical requirements of system engineering, and analysis and design documents• Providing technical expertise to ensure that risks management, change management, and incident management are addressed in the request-for-proposals (RFP's), and compliant with the company/client/authority standards, regulations, procedures, audits, guidelines, etc.• Estimating piping infrastructure and network elements, including: installation crews' members, cost analysis, and project implementation planning.• Coordinating projects' plans with clients and 3rd party vendors (suppliers/partners)• Developing best-practice work schemas according tothe work standards, and discipline of the project auditsPIPING/PIPELINES SKILLS• Preparing Piping Specifications And Classes• Preparing Piping Wall Thickness Calculations•Navigate uses and facilities of PDMS Piping application• Piping Scope in P&ID'SLINE DESIGNATION TABLE (Line List)• Preparing Material Requisitions For Quotations (MRQ's) for Bidding• Piping Bidders/Suppliers Correspondences•Preparing Material , Tools and fitting which is needed to complete the work scoop tasks• Technical Evaluation Report• Preparation of Purchase Orders if it requested • Material Balance And Control• Coordination between Technical office - planning

Mechanical Operation & Maintenance of Drilling off-shore & On Shore Land-Rigs.Pumps - Diesel Engines - Rotation Equipment operation and maintenance it was a great experience to know how to Combine between the scientific study and practical applicationWorking hard with durability was the main issue of the successful Engineering criteria .

Petroleum Safety and Environmental Services Company (PETROSAFE) has been established in 1996, according to the investment laws and its executive regulations to serve the oil and gas sector as well as industrial and commercial sectors in Egypt and the region to ensure that occupational health, safety and environment activities are properly performed. The company is one of the Egyptian petroleum sector companies owned 100% by The Egyptian Petroleum Corporation (EGPC).I worked in Perosafe one of the Ministry of petroleum trusted Company of the field of oil and Gas Engineering Construction ConsultancyI joined this company as a MEP Senior Mechanical Consultant Engineer The Project that I share my experience with - Halon Fire Supression System Replacement with FM200 In Khalda SALAM (APACHE) Oil Field- CO2 Firefighting System Network Installation of The International Petroleum labors Hospital-Pressure Vessel Tanks Cell Water Spray System and Foam System at EPC Petroleum Company

Company Overview(CO – OP) was founded in 1934 as the sole national company in the filed of marketing of petroleum products. ( Egyptian General Petroleum Corporation).• Our main activities includes producing and marketing of different types of lubricating oil such as engine oils, hydraulic oils, gear oils and special oils for tools and machines in all fields of industry.working as a construction supervision Engineer with more than 7+ years Experience in the installation and maintenance of oil & Gas Pipelines - Pressure vessel Tanks installation according to API 650 and API 653-Also the infrastructure piping application various types of water features and fabrication material - such as HDPE - Stainless steel - GRP )-Jetty Gas line and oil line transfer - welding and installation