• Monitor and control all process parameters of plant independently from DCS (Delta V) ControlRoom.• Accepts shift from previous with detailed log sheet of operational adjustments and changes during previous shift.• Handling Plant Emergencies during the shift such as operating problems or equipment failure, power failure instrument air/cooling watersystem failure take immediate action. • Maintain production Capacity and Product specification as per target sheet.• Duties included Controlled unit process variables using Emerson Delta V DCS to ensure safe, efficient, and properoperations on Preparation Vessel, Distillation Column, Condensers, Evaporators, Ejector, CST/PF Reactors, Melt phasedownstream, through Feed/Flow rates, Temperature, Pressure, levels.• Carefully recorded DCS process parameters on an hourly basis, such as temperature, pressure,level, flow/drop rate, density, mole ratio, speed, amp, of various equipment's.• Follow Standard Operating Procedures (SOP's), including review of and improvement to existing SOP's, develop new SOP's as required.• Issuing and authorizing of Safe Work Permits, Notifications through SAP.• Maintained effective communication with operators, and support staff to ensure smooth operations and quick response to issues.• Prepared reports on the consumption of raw materials, production & Utilities.

• Appointed as a Commissioning Supervisor at Poly Plant capacity of 600 TPD.• Worked in Pre Commissioning, Commissioning activities on various equipment's like Leak test, flushing, cleaning, pressure testing. •Detail study of P&ID and drawing for 600 TPD for equipment layout and installation.•To revamp the plant into two different lines for TGC & FGC production.•Addition of new equipments and refurbishment of existing equipment.• Prepared BFD & PFD according to designated layout.• Carried out calibration of equipments.• Carried out circulation of different circuits.• Verified lines, instruments through P&ID to ensure installed correctly.• Executed in master startup and shutdown with operating procedure of pumps, blowers, furnace, exchangers, cooling tower, valves and instrumentation.

• Oversaw plant operation's including the switch over various equipments involved in continuous poly condensation plant.• Handled emergencies/troubleshooting & try to keep safe the plant when any emergency happened.• Oversaw reading's, maintain equipment's that controls the parameters of plant, Specific duties inspecting equipment & product, record keeping, managed manpower.• Monitored Utilities, NGP (Nitrogen Generation Plant), Instrument Air System, Chemical dosing for water treatment. • Performed detailed inspection round of plant unit wise to check abnormalities & plant equipment used in operations to ensure accurate proper functioning along with housekeeping.• Supervised MEG tank lorry received & decanting into tank yard, as well as Offloading raw material into storage silo with SOP's.• Review and evaluate equipment deficiencies and if required initiate maintenance work requests followed by preparing equipment as necessary for maintenance activities using Lock Out/Tag Out Standards Prioritize.

• Responsible for overseeing, reading and maintain equipment that controls the parameters of plant.• Specific duties include watch parameters. inspecting product, handle troubleshooting, record keeping, and try to safe the plant when any emergency happen.• Monitored & Control Unit Process Distributed Control System (DCS) based on Emerson Process Management System (Delta V) to ensure safe efficient, proper operation on equipments to maintain (Fludization Bed, Temperature, Pressure, Flow rates & Reactors level) to build/maintain intrinsic viscosity. • Monitored & Recorded DCS Data on a regular basis by Process Parameter readings of Temperature, Pressure, Flow rates, Reactor’s level, Blower’s, Compressor’s Rpm’s.• Review & analysis plant data using Plant information and Laboratory information.• Identify problems/determine possible solutions & actively work to resolve the issue.• Lead startups, shutdown, test runs activities.• Review SOPs/SOCs & give suggestions for plant improvement/maintenance.• Covering the team leader role.

• Handled Start up/Shutdown, Holdup Switch over of pump's, Filters, Tanks, Heat Exchanger & Troubleshooting/Emergencies of continuous Poly Condensation Plant.• Operated Properly of Furnace, Equipment's, Product Machine through DCS/PLC System & HMI Panel.• Made Progress on Distillation column, Condenser’s, Reactors, Vessels Tanks, Reboiler, Furnace/oil, Pumps, Compressors, Blowers, Rotary’s, Filters, Stainer’s, Heaters/Exchangers, Crystallizer, Cooler, Vibrator’s, Valves/Controllers, Ethylene Glycol based Vacuum Ejector System, Instruments etc.• Operated Properly of Additives through PLC System/Preparation of Catalyst, Phosphoric, Red Tonner, Blue Tonner to maintain dosing tank level & adjust dosing rates on instructions.• Performed Decanting of Raw material into storage tank. • Performed Regular detailed inspection round of the unit plant equipment's used in operation to identify proper functioning.• Monitored & Record information field data parameter reading through instruments located on plant equipment.• Integrated Proper housekeeping and equipment care in plant operation area.• Coordinate with Mech/I&E team for daily routine jobs & during plant maintenance or troubleshooting condition for timely job execution.• Competent with PTW System for maintenance jobs required.• Succeeded Line Up, Start/Stop, Securing equipment, isolate/deisolate & check lines for gas/fluid leak • Recorded carefully logs on sheets/book & communication during shift handover, takeover or work with a team.• Monitored Consumption of Utilities & Check Balanced of Inventory.• Good knowledge of P&ID, PFD.

• Operated Properly Production Machine through PLC System & HMI Panel as per SOPs.• Recorded carefully data of production on daily shift basis in sheets.• Check and Balanced of inventory.