• For the initial phase, production takes place through the Baleine FPSO, a refurbished and upgraded Floating Production Storage and Offloading unit capable of handling up to 15,000 bbl/d of oil and around 25 Mscf/d of associ gas.• Raising applicable Permit to Work (PTW) in order to complete work scopes in a controlled and safe manner, Undertake appropriate Risk Assessments (RA) in order to complete work scopes in a safe and controlled manner to ensure that the project proceeds timely • Provides technical /engineering support and advice to Construction Commissioning work at site, trouble shoots and follows up to rectify the gaps or Problems. Where necessary, provides off-site support and vendor advice• Instruments and control systems like DCS Fire & Gas, Safety shutdown systems, Remote telemetry units, Wellhead control panel, Gas metering systems, wells instruments, Liquid metering systems, Multiphase flow meter, High integrity pressure protection systems, HVAC, CCTV and other field instruments like transmitters, Control valves, Shut down Valves and Choke Valves, Sub-sea control and Termination units • Performed preventive maintenance and calibration: Maintained optimal functionality of instrumentation systems (Rosemount, Yokogawa, Honey well). Review vendor data to assure specifications and Project requirement • Client Issued for Construction (IFC) drawings, Inspection and Test Plan, Project Quality Plan, Client Engineering Standards, Specifications• Subsystems punch closing hand over commissioning team support commencing team Implement Lessons Learnt from previous projects, also ensure the Lessons Learned in his/her functional area for the assigned project are captured and reported as per the • Commissioned vendor packages and handled instrumentation trouble shooting Led vendor package commissioning and resolved technical issues promptly. Vendor Engineer meeting

FPSO

• Conducted JSA and toolbox talks Ensure work environment through safety analysis and regular safety meetings.• Managed commissioning and startup activities Oversaw efficient project launch. Daily meeting with clients & vendors • Performed preventive maintenance and calibration: Maintained optimal functionality of instrumentation systems (Rosemount, Yokogawa, Honey well). Review vendor data to assure specifications and Project requirement • Conducted loop checking and testing Verified instrumentation loop integrity. Construction & Commissioning activates monitoring • Interpreted P&ID diagrams Facilitated project plan • Ensured HSE compliance up held safety and environmental standards.• Worked with electrical systems Contributed to seamless integration of instrumentation and electrical components.• Commissionedvendorpackagesandhandledinstrumentationtrouble shooting: Led vendor package commissioning and resolved technical issues promptly. Vendor ,Engineer meeting • Follow Construction & commissioning punch& as-built clear • Able to work with process mechanical and other disciplines to secure data needed to specify instrumentation equipments.

• For the initial phase, production takes place through the Baleine FPSO, a refurbished and upgraded Floating Production Storage and Offloading unit capable of handling up to 15,000 bbl/d of oil and around 25 Mscf/d of associ gas.• Raising applicable Permit to Work (PTW) in order to complete work scopes in a controlled and safe manner, Undertake appropriate Risk Assessments (RA) in order to complete work scopes in a safe and controlled manner to ensure that the project proceeds timely and • Provides technical /engineering support and advice to Construction Commissioning work at site, trouble shoots and follows up to rectify the gaps or Problems. Where necessary, provides off-site support and vendor advice• Instruments and control systems like DCS Fire & Gas, Safety shutdown systems, Remote telemetry units, Wellhead control panel, Gas metering systems, wells instruments, Liquid metering systems, Multiphase flow meter, High integrity pressure protection systems (HIPPS), HVAC, CCTV and other field instruments like transmitters, Control valves, Shut down Valves and Choke Valves, Sub-sea control and Termination units • Performed preventive maintenance and calibration: Maintained optimal functionality of instrumentation systems (Rosemount, Yokogawa, Honey well). Review vendor data to assure specifications and Project requirement • Client Issued for Construction (IFC) drawings, Inspection and Test Plan, Project Quality Plan, Client Engineering Standards, Specifications• Subsystems punch closing hand over commissioning team support commencing team Implement Lessons Learnt from previous projects, also ensure the Lessons Learned in his/her functional area for the assigned project are captured and reported as per the • Commissioned vendor packages and handled instrumentation trouble shooting Led vendor package commissioning and resolved technical issues promptly. Vendor Engineer meeting

•• The scope of work for GC 32 US$1.3 billion includes green field activities with tie-in works to existing brown field infrastructure, and will have the capacity to produce around 120,000 barrels of oil per day together with associated water, gas and condensate.• Prepared project documentation and aided proposal preparation Assisted in creating comprehensive project documentation for successful proposals. Proper the documents SAT,FAT with clines Controls • Inspection and completion of applicable certification / documentation as required including red-lining of drawings to reflect ‘as-built’ status• Prepare technical bid evaluation estimation (BOQ), Budget for the execution of projects subcontractors as Built drawing approvals • To supervise all Instrument pre-commissioning, commissioning and start-up activities for assigned sub-systems. This includes preparatory activities, coordinating resources (technicians, equipment, and other departments), and expediting documentation – in particular handover dossiers, attending walk-downs from construction and categorizing punch-list items.• Managed control narratives, I/O lists ,P&ID loop diagrams ,and Cause and Effect charts Oversaw control documentation ,including narratives, I/O lists, P&ID, loop diagrams, and Cause and Effect charts.• Expertise in PLC/DCS/SCADA systems and process con troll loops Possessed in depth knowledge process control loops. Drawing approvals with client

1.Documentation & Proposals: Prepared comprehensive project documentation and contributed to proposal creation, estimating materials and hours.2.Safety Compliance: Conducted Job Safety Analysis (JSA) and facilitated toolbox talks to ensure strict adherence to safety protocols for the team.3.Efficient Execution: Executed assigned tasks efficiently, following process plans and instructions to meet project objectives.4.Construction Management: Organized and supervised construction, pre-commissioning, and commissioning activities, providing regular reports to senior engineers.5.Instrumentation Leadership: Led a team in the erection, calibration, and commissioning of instruments according to Approved for Construction (AFC) Drawings.6.UPS Systems: Installed and commissioned 70kVA AC and 115V DC UPS systems, managing cable terminations.7.LV Bus Duct: Oversaw the installation of LV Bus Duct and conducted tests on MV cables, including Megger and Hi-Pot tests.8.Distribution Boards: Handled distribution boards for HVAC, lighting, and small power, covering terminations and commissioning.9.Grounding & Cable Infrastructure: Managed the installation of grounding systems and cable infrastructure.10.Electrical Conduits: Oversaw electrical conduit work for various systems, ensuring compliance with specifications.11.Records & Certificates: Maintained meticulous records of tests, certificates, licenses, including the creation of hook-up drawings.12.Checklists & Analysis: Developed checklists and conducted analyses of spare parts consumption for efficient project management.13.Daily Coordination: Conducted daily meetings with site coordinators and team leaders, providing updates on project progress.14.Problem-Solving: Maintained regular communication with discipline engineers and supervisors to address project challenges and ensure a safe working environment.

• Construction and pre-commissioning on a lump-sum-turnkey basis to build an offsite and utilities facility for the 1 billion cubic feet per day gas development complex. The facility is in the Shah region, 180 km southwest • Instrumentation Planning & Execution: Reviewed and executed plans for Gas Turbine Generation (GTG) instrumentation works including the installation of junction boxes ,conduits ,cable trays ,cable pulling, termination, and loop checking .This also involved impulse tubing, stanchion installation, air lines, and leak testing for turbine and alternator cooling systems.• Daily Reporting & Recommendations Reporteddailyactivitiestothedirectmanagerandprovidedrecommendationsfor improving the reliability of instruments and the system.• Drawing Interpretation Developed an understanding of drawings for PLC systems, remote I/O list panels wiring diagrams, and network drawings to ensure accurate installations.• Transmitter Activities Over saw the pre-commissioning and commissioning of transmitters, and scheduled meeting with company associates involved in MMS, CMS, ICS, F&G, ESD, and UCP systems. installation • Review typical installation drawing, signal wiring drawing, vendor documents, Piping and instrumentation diagram (P&ID), process engineering flow scheme, hook up drawing, Instrument loop drawings, Functional logic diagram, Schematic Diagrams, Field Termination, J.B and electrical panel wirings drawing, Cable schedule, Cause & Effect Diagram, As Built drawing, Interconnection Drawing etc

1.Instrumentation Planning & Execution: Reviewed and executed plans for Gas Turbine Generation (GTG) instrumentation works, overseeing the installation of junction boxes, conduits, cable trays, cable pulling, termination, and loop checking. Managed impulse tubing, stanchion installation, air lines, and leak testing for turbine and alternator cooling systems.2.Daily Reporting & Recommendations: Reported daily activities to the direct manager and provided recommendations for enhancing the reliability of instruments and the system.3.Drawing Interpretation: Developed a comprehensive understanding of drawings for PLC systems, remote I/O panels wiring diagrams, and network drawings to ensure accurate installations.4.Transmitter Activities: Supervised the pre-commissioning and commissioning of transmitters. Scheduled meetings with company associates involved in MMS, CMS, ICS, F&G, ESD, and UCP systems5..Team Leadership: Directed a team in executing Gas Turbine Generation (GTG) instrumentation works, ensuring collaboration and adherence to project timelines and quality standards.6.Quality Assurance: Implemented quality assurance measures throughout the instrumentation process, conducting regular checks to ensure compliance with industry standards and project specifications.7.Collaboration with Stakeholders: Collaborated with various stakeholders, including engineers and project managers, to align instrumentation activities with project goals and objectives.8.Safety Compliance: Ensured strict adherence to safety protocols and regulations during all instrumentation activities, conducting regular safety audits and addressing concerns promptly.9.Training and Development: Provided training and guidance to team members on instrumentation procedures, safety protocols, and equipment handling, contributing to skill development within the team.