Marco Binda Email & Phone Number
@leonardocompany.com
LinkedIn matched
Who is Marco Binda? Overview
A concise factual answer block for searchers comparing this professional profile.
Marco Binda is listed as Maintenance Planning at Swiss Helicopter Maintenance AG, a with 13 employees, based in Varese, Lombardy, Italy. AeroLeads shows a work email signal at leonardocompany.com and a matched LinkedIn profile for Marco Binda.
Marco Binda previously worked as Customer Support Delivery: Pre-Owned Helicopters Specialist at Leonardo Helicopter Division and Maintenance Organization: Structural Repair-Painting-Internal Arrangement Maintenance Supervisor at Leonardo Helicopter Division. Marco Binda holds Aw169 (Pwc 210) General Familiarization Type Training Course (Cat. C) from Training Academy A. Marchetti.
Email format at Swiss Helicopter Maintenance AG
This section adds company-level context without repeating Marco Binda's masked contact details.
AeroLeads found 1 current-domain work email signal for Marco Binda. Compare company email patterns before reaching out.
About Marco Binda
Marco Binda is a Maintenance Planning at Swiss Helicopter Maintenance AG.
Marco Binda's current company
Company context helps verify the profile and gives searchers a useful next step.
Marco Binda work experience
A career timeline built from the work history available for this profile.
Customer Support Delivery: Pre-Owned Helicopters Specialist
• Interface between the P145 organizations involved in the internal reconfigurationactivities for the suppliers selected for the livery with the Marketing, Internal /External IPT, PML – Preowned Helicopters, CS&S – Modification Engineering andCS&S – Material Management departments.• Pre-owned helicopter Pre Buy, Pre Acceptance and Incoming Inspections executionand reporting.• Coordination / technical supervision of maintenance refurbishment andreconfiguration /… Show more • Interface between the P145 organizations involved in the internal reconfigurationactivities for the suppliers selected for the livery with the Marketing, Internal /External IPT, PML – Preowned Helicopters, CS&S – Modification Engineering andCS&S – Material Management departments.• Pre-owned helicopter Pre Buy, Pre Acceptance and Incoming Inspections executionand reporting.• Coordination / technical supervision of maintenance refurbishment andreconfiguration / upgrade activities, both in the case of activities carried out at theP145 LHs and at third-party MROs• Interface with the Leonardo Helicopter Division CS&S Regional Centers• Helicopters delivery and acceptations activitiesHelicopters Internal Arrangement and Livery Integrated Project Team focal point forCustomer Support Department Show less
Maintenance Organization: Structural Repair-Painting-Internal Arrangement Maintenance Supervisor
• Cooperation with Design Engineering Departments in order to develop tools and jigs,maintenance and repair instructions, paint schemes and damage preliminaryassessment.• Responsible of planning and monitoring for all LHD helicopters models (alsoLicensed models) of the Structural Repairs, Damaged Aircrafts Recovery,Helicopters painting (including the coordination of the activities with the suppliers)and helicopters internal arrangement installation, modification and… Show more • Cooperation with Design Engineering Departments in order to develop tools and jigs,maintenance and repair instructions, paint schemes and damage preliminaryassessment.• Responsible of planning and monitoring for all LHD helicopters models (alsoLicensed models) of the Structural Repairs, Damaged Aircrafts Recovery,Helicopters painting (including the coordination of the activities with the suppliers)and helicopters internal arrangement installation, modification and refurbishment(including the coordination of the activities with supplier).• Emergency Floats and airframe sub-assembly (i.e. tail, tail plane,...) Repair andOverhaul shop management.• Human resources selection and coordination.• Helicopters Internal Arrangement and Livery Integrated Project Team focal point forCustomer Support. Show less
Maintenance Organization: Technical Assistant
• AW109SP / AW109SP "DaVinci" (REGA configuration) initial "on site" assistance focalpoint• AW189 EASA MSG-3 Analysis activity (starting from January 2012) as "Zonal Analysis"Working Group Leader.• AW189 entry in service and Maturity Program responsible.• Maintenance activities planning and external maintenance• New maintenance bases set-up and opening• Cooperation with Design Engineering Department in order to develop maintenanceand repair instructions… Show more • AW109SP / AW109SP "DaVinci" (REGA configuration) initial "on site" assistance focalpoint• AW189 EASA MSG-3 Analysis activity (starting from January 2012) as "Zonal Analysis"Working Group Leader.• AW189 entry in service and Maturity Program responsible.• Maintenance activities planning and external maintenance• New maintenance bases set-up and opening• Cooperation with Design Engineering Department in order to develop maintenanceand repair instructions, maintenance programs and product improvements forAgusta-Bell Series, A109 Series, AW139, AW189. Show less
Customer Support Engineer
• AW109SP / AW109SP "DaVinci" (REGA configuration) entry in service focal point• Supporting Customer in problem solving and troubleshooting, increasing thehelicopter availability and crews operational capability for A109 Series helicopters.• Development of repair assessment after incident or accident with survey on site.• Cooperation with supplier and Design Engineering Department for productimprovement.• Evaluation of warranty claims.• Validation and development of… Show more • AW109SP / AW109SP "DaVinci" (REGA configuration) entry in service focal point• Supporting Customer in problem solving and troubleshooting, increasing thehelicopter availability and crews operational capability for A109 Series helicopters.• Development of repair assessment after incident or accident with survey on site.• Cooperation with supplier and Design Engineering Department for productimprovement.• Evaluation of warranty claims.• Validation and development of Maintenance Procedures. Show less
A109 (Series)/A119 Final Assembly Line Team Leader
• Leading the final assembly line operations of A109 Series with the coordination ofhelicopter systems installations.• Managing and supervising technicians activities to achieve the productionmilestones.• Human resources selection.• Cooperation with Design Engineering Departments and suppliers to improve finalassembly process.
Final Assembly Line Mechanical And Structural Engineer
A109 Series components and systems installations and ground functional checks.
Machine Tools Engineer
Construction and testing of injection moulds.
Colleagues at Swiss Helicopter Maintenance AG
Other employees you can reach at shm-ag.ch. View company contacts for 13 employees →
Sven Haefliger
Colleague at Swiss Helicopter Maintenance AgLiechtenstein
View →
MS
Martina Sandrini
Colleague at Swiss Helicopter Maintenance AgBalzers, Liechtenstein
View →
SK
Sandro Krättli-Gähwiler
Colleague at Swiss Helicopter Maintenance AgLiechtenstein
View →
MA
Marzia Allera
Colleague at Swiss Helicopter Maintenance AgCuveglio, Lombardy, Italy
View →
FC
Fabio Cossi
Colleague at Swiss Helicopter Maintenance AgUggiate-Trevano, Lombardy, Italy
View →
AG
Aaron Garbani Marcantini
Colleague at Swiss Helicopter Maintenance AgGordola, Ticino, Switzerland
View →
Marco Binda education
Aw169 (Pwc 210) General Familiarization Type Training Course (Cat. C)
Energy Manager, Energy Manager 32 Ore
Module 9 – Human Factor
Module 10 – Aviation Legislation
A109S Pilot Type Rating Ground Course
Certificato Di Abilitazione Di Secondo Grado Per La Conduzione Dei Generatori Di Vapore
Patentino Di Abilitazione Di Primo Grado Per La Conduzione Di Impianti Termici
Maturità Tecnica Industriale, Perito In Costruzioni Meccaniche
Frequently asked questions about Marco Binda
Quick answers generated from the profile data available on this page.
What company does Marco Binda work for?
Marco Binda works for Swiss Helicopter Maintenance AG.
What is Marco Binda's role at Swiss Helicopter Maintenance AG?
Marco Binda is listed as Maintenance Planning at Swiss Helicopter Maintenance AG.
What is Marco Binda's email address?
AeroLeads has found 1 work email signal at @leonardocompany.com for Marco Binda at Swiss Helicopter Maintenance AG.
Where is Marco Binda based?
Marco Binda is based in Varese, Lombardy, Italy while working with Swiss Helicopter Maintenance AG.
What companies has Marco Binda worked for?
Marco Binda has worked for Swiss Helicopter Maintenance Ag, Leonardo Helicopter Division, Leonardo Helicopters Division, and Almar Srl.
Who are Marco Binda's colleagues at Swiss Helicopter Maintenance AG?
Marco Binda's colleagues at Swiss Helicopter Maintenance AG include Sven Haefliger, Martina Sandrini, Sandro Krättli-Gähwiler, Marzia Allera, and Fabio Cossi.
How can I contact Marco Binda?
You can use AeroLeads to view verified contact signals for Marco Binda at Swiss Helicopter Maintenance AG, including work email, phone, and LinkedIn data when available.
What schools did Marco Binda attend?
Marco Binda holds Aw169 (Pwc 210) General Familiarization Type Training Course (Cat. C) from Training Academy A. Marchetti.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trialCheck these profiles if this is not the Marco Binda you were looking for.
View similar profiles