Mariana Eddine Email & Phone Number

Coquitlam, Bc, Ca

Coquitlam, British Columbia, Ca

- Project Planning & Execution: Worked on dozens of new projects, including the implementation of a new ERP system, in which I worked from Data Architecture Design to Master Data Management. Lead and actively worked in the development of our current semi-automated scheduling system, which increased efficiency by over 100% and allowed us to reduce headcount by 50%. All planning processes now have detailed work instructions, and the team is fully cross-trained, reducing potential downtime/delays.- Analysis & Reporting: Being extremely data driven, I have built a number of reports to mine the data available for valuable information from our operations. Responsible for leading accurate reporting of daily billable hours, production data, wastage and downtime reports, as well as other company KPIs. Not only I have worked on many projects and reports myself, but I have also worked on building the knowledge within my direct reports, so that they can be more proactive and independent in identifying and implementing process improvements. It is key to ensure all data is accurate, available and easily accessible to all involved.- Cross-functional communication: Developed a process flow for the entire company (order to cash). The process allowed us to understand where handoffs occurred, to reduce redundancy and overall processing time. It also allowed us to create cross-functional teams to improve some internal processes and foster collaboration and knowledge sharing.

Coquitlam, British Columbia, Ca

Coquitlam, British Columbia, Ca

Coquitlam, British Columbia, Ca

Temporary worker. Caught inconsistencies during the data entry tasks assigned, and corrected them. This led to securing a full-time position with the company!

Toronto, On, Ca

Promoted to Cresting Supervisor shortly after joining the company, acted as the key individual for production planning and continuous improvement of cresting processes, adapting and modifying techniques.• Organizational, Quality & Safety: Implemented 5S methodology in the work place. Kept inventory accuracy; ordering stock products, receiving and distributing shipment in different locations. Ensured proper maintenance of the machines, correct use of equipment, and quality of production.• Computer Applications: Daily use of smart spreadsheets in Excel. Created training material and a cresting Handbook to instruct new staff in the heat pressing procedures for all products carried by MLSE.Managerial: Managed schedule of production as per demand, and assigned tasks to each individual based on their strengths and weaknesses in 3 different locations.Full-time: March 2017 - March 2018 and March 2019 - May 2019Part-time: March 2018 - March 2019

Toronto, On, Ca

Concord, Ontario, Ca

Day to day tasks would also include: reviewing manufacturing procedures; updating customer drawings and documents; responding to RFQ; quoting and purchasing materials; quoting processes and selecting sub-contractors; monitoring materials and processing suppliers, ensuring OTD; daily walks through facility to ensure Health and Safety protocol was being followed at all levels.• Bombardier Approved List: Led this Tier 2 manufacturer into a Class A Bombardier Approved Facility. Researched and worked closely with Bombardier Quality personnel. Instructed employees on 9 new Bombardier Processes (BAPS).• Time Management and Planning: Managed and organized production schedule for the 15 CNC machines in-house, improving on-time delivery from 62% to 93% in less than 7 months, one of the major issues faced by the company in 2017-2018. • Cross-functional and cross-cultural communication: Acted as technical interface between clerical and production teams. Defined and created travellers for all production steps in a technical, yet simple and concise manner. Worked closely with the Quality Department to verify effectiveness of corrective and preventive actions.• Technical Assessment & Problem Solving: Completed multiple analyses on cost reductions and productivity increase, and re-quoted parts in continuous production for over 2 years, getting company back into a profitable path. Assessed costs on outside processes and delivery fees, recommending to the President to pursue approval to perform some of them in-house.

Mississauga, Ontario, Ca

Joined the Structural Assets Group shortly after finishing at the University of Toronto to gain observational experience from operating units specializing in areas of Failure Analysis and Loss prevention. Worked with a team of Civil, Mechanical, Chemical and Materials engineers in order to provide the most complete and accurate information to our clients.• Analysis & Reporting: Responsible for technical reports in corrosion, failure analysis and material selection for Australasia and Middle East. I would research and report my findings to the office in Mississauga, Ontario.• Failure Investigation: Worked in a project of an Aluminium refinery in which the acid tanks were corroding in a much faster rate than calculated. After evaluating the areas of corrosion I proposed to further analyse the filler used during the welding process, discovering that it had the wrong composition (leading to galvanic corrosion). The findings saved the company millions in lawsuits.• Research: Worked with Matt King in the material selection for Sulphuric Acid Tanks for an aluminium smelter in Perth. Showcased all options, including coatings, with pros and cons, pointing out the best one in terms of both price and estimated durability.• Legal advice: Worked in a case of Microbial corrosion, demonstrating where the failure occurred, providing information for the client to avoid future problems. Potential savings of over AU$375M in legal actions. • Engineering Technical

Ca

• Analysis & Reporting: Created 3D designs of Aluminium structural parts, performed FEA in SolidWorks, confirming the results with mechanical testing, performed at UofT. Redesigned parts to reduce costs and material use by up to 40%• Multi-Language Technical Writing: Created work methods, test procedures, and manuals, in Portuguese, Spanish and English.

Santo André, Sp, Br

Upheld the duties of a Continuous Improvement Inspector for internal processes, as well as a R&D Engineer within the Product Application Engineering Unit, and with occasional site inspections for Corrosion Investigation. Grew from the mentorship of senior engineers, and adhered to highly strict regulatory requirements defined by the Brazilian Association of Technical Standards (ABNT).• Technical Assessment & Problem Solving: Implemented a new manufacturing procedure to improve the production from scrap metal, performed strategic sampling, and ran the mechanical and chemical tests for the experimental batches. The result was shown in savings of more than R$19K per ingot of brass and potential for more than R$45M per year.• Fortitude & Growth: Held occasional Acting Supervisor responsibilities, overseeing 10 to 15 technicians, allocating work to all units, and reviewing production reports and work progress. • Analysis & Reporting: Created technical reports and performed visual inspection, hydrostatic test, and Dye Penetration/Liquid Penetrant testing, to identify corrosion or cracking.

Santo André, Sp, Br

Helped senior engineer in the creation of technical reports in corrosion and failure analysis, and client technical assistanceParticipated in the Research and Development of New Products such as auto-adhesive copper tapeStarted the project to improve the use of scrap metal in production.

São Bernardo Do Campo, São Paulo, Br

• Material Selection and Failure Investigation: Reduced 15% of costs in spare parts after performing the correct material selection for parts that presented corrosion and wearing problems - the use of a teflon piece would be preferred to ensure compliance with food industry standards and avoid metalic residues from falling.• Technical

Brasília, Df, Br

Mentored by Prof. PhD Daniel Zanetti de Florio for near 3 years at the Universidade Federal do ABC, worked in the research of Solid Oxide Fuel Cells:- Project 2010-2010: Synthesis of Solid Electrolytes for Application in Fuel Cells (paid research)- Project 2009-2010: Preparation and Characterization of LSCF cathodes and Solid electrolytes ZrO2: In2O3 (paid research)- Project 2008-2009: Synthesis of Lanthanum-Based Perovskites by Polymeric Precursors Method

Santo André, São Paulo, Br

Course: Maths Foundations (20h/week)Helped the students with theory, calculations and class projects. Displayed exercise lists resolution explaining all the necessary steps to get the answer.

Minor / Specialization, Environmental Engineering

Bachelor Of Applied Science - Basc, Materials Engineering

Bachelor’S Degree, Science And Technology

Diploma, Project Management