Mark Anders Email & Phone Number

Milton Keynes, England, United Kingdom

Milton Keynes, England, United Kingdom

Watford, England, United Kingdom

• Liaised with architects, clients, surveyors, and fabricators to ensure design solutions were feasible, safe, and cost-effective while ensuring the project brief was achieved.
• Created Tekla models, approval drawings, and fabrication drawings for stairs, balconies, railings, and steel structures.
• Completed site surveys and worked with clients to overcome project limitations and challenges.

Milton Keynes, England, United Kingdom

• My role at TechnipFMC as a Civil Engineer included a range of both Engineer and Designer responsibilities.
• Used Tekla to design complex modular towers for a Carbon Capture project and assigned attributes to identify the elements associated with each module, this enabled fast the creation and modification of drawings.
• Used Tekla to modify existing structures, created models from as-built drawings and worked with the Lead Structural Engineer to modify the design to suit the changes… Show more My role at TechnipFMC as a Civil Engineer.
• Used Tekla to modify existing structures, created models from as-built drawings and worked with the Lead Structural Engineer to modify the design to suit the changes required. I also ensured the constructability.
• Produced Cost-Time-Resource templates for various types of projects, these included standard deliverables, notes, additions and exclusions.
• Completed feasibility studies to determine the most suitable designs on both green and brown field sites, considered the constructability restraints and costs associated with each option.

London, United Kingdom

• My role at Technip as a Civil Engineer included a range of both Engineer and Designer responsibilities. I also spent time working in the Procurement department.
• Evaluated different drainage schemes in a congested area to determine the most suitable option. Considered the advantages and disadvantages of a below grade gravity sewer against an above grade route requiring a pump.
• Checked bolted connections to ensure design was in line with standards and there were no… Show more My role at Technip as a Civil Engineer included a range of both Engineer and Designer responsibilities. I also spent.
• Checked bolted connections to ensure design was in line with standards and there were no clashes.
• Reviewed and commented on Fabricators drawings and checked for potential clashes.
• Created a Tekla model, associated drawings, and material take-off for an new steel structure located on existing steelwork.

Moscow, Russian Federation

• During a 6-month assignment in Moscow working on the Yamal LNG project I undertook various tasks, ranging from creating Tekla models and drawings urgently required on-site, final checking of drawings before.
• Checked and commented on detailed and shop drawings created by Fabricators before fabrication… Show more During a 6-month assignment in Moscow working on the Yamal LNG project I undertook various tasks, ranging from.
• Checked and commented on detailed and shop drawings created by Fabricators before fabrication began.
• Conducted business trips to St. Petersburg and Zlatoust working in the Fabricators office, checked drawings on-site to speed up the process when work was behind schedule, answered technical queries, and acted as the.
• Overcame challenging language barriers to solve problems and answer technical queries.
• Checked and investigated differences between TechnipFMC’s general arrangement Tekla models and the Fabricators detailed Tekla models and determined the potential impact on design and any associated equipment.

Paris, France

• During an 8-month assignment in Paris working on the Yamal LNG project I undertook various tasks, ranging from creating Tekla models and drawings urgently required on-site and checking drawings which were time critical.
• Created Tekla models, drawings and material take-offs for stick-built miscellaneous structures.
• Modified Tekla models and drawings when Sub-Contractors highlighted concerns or errors.
• Checked fireproofing layouts to ensure the design met project and… Show more During an 8-month assignment in Paris working on the Yamal LNG project I undertook various tasks, ranging from creating Tekla models and.
• Checked fireproofing layouts to ensure the design met project and national standards and checked for discrepancies in the quantities between the model and drawings.
• Checked and commented on structural drawings. Checked steel arrangements, baseplate details and ladder supports. Made sure drawings and Tekla models matched and ensured there were no clashes present in the model.

Milton Keynes, England, United Kingdom

• My role at Technip as a Civil / Structural Designer included a range of responsibilities from leading a team of Tekla Designers to overseeing the material take-off spreadsheets within the department.
• Lead a team of seven Tekla Designers, liaised with the Structural Lead Engineer, and was the point of contact for all other disciplines. I Assigned and managed the workload within the team which included inexperienced.
• Prepared Tekla models for… Show more My role at Technip as a Civil / Structural Designer included a range of responsibilities from leading a team of Tekla Designers to overseeing the material take-off spreadsheets.
• Prepared Tekla models for export into PDMS.
• Created simple custom components in Tekla to avoid repetitive modelling.
• Worked with colleagues and other Technip offices to solve issues effecting Tekla models, drawings and reports.

Milton Keynes, England, United Kingdom

• My role at The Shaw Group as a Civil / Structural Trainee Technician while completing my apprenticeship included a range of responsibilities from creating drawings in MicroStation and AutoCAD, models in Frameworks, and.
• Created structural and civil CAD models in MicroStation, Frameworks, and SP3D and prepared the subsequent drawings ready for issue.
• Completed underground and foundation layout drawings, structural drawings, site plans… Show more My role at The Shaw Group as a Civil / Structural Trainee Technician while completing my apprenticeship included a range.
• Completed underground and foundation layout drawings, structural drawings, site plans, topographical and geotechnical test location drawings in AutoCAD and MicroStation.
• Created spreadsheets to quickly work out the material take-offs for different type and shape foundations and retaining walls. Show less

Bachelor'S Degree, Civil Engineering, First Class Honours

Part-time Study Year 3: Dissertation - Design of a Ten Storey High Rise Building (Eurocode design) Geotechnical Concrete and Steel.

Hnc (Higher National Certificate), Civil Engineering, Distinction

Activities and Societies: Mentored full-time student Part-time Study Year 2: Geotechnical Hydraulics Structural Year 1: Materials Maths.

Btec In Mechanical Engineering, Engineering, Distinction

Part-time Study Year 2: 3D CAD (AutoCAD) Business Studies Further Mechanical Principles Product Design P.L.C Year 1: Applications of.

High School

Activities and Societies: Cross Country Running Team, Field Hockey Team A Grade: Engineering (AA), Design and Technology, Information and.