Mark Deimel Email & Phone Number

Longmont, Colorado, United States

Maintaining the EHS program for HITT as they refit a building for Micron.

South Bend, Indiana, United States

• Support RCMT by administering, implementing and maintaining the AEP Safety Program during construction of Edison Project solar substation. Coordinated safety procedures between multiple subcontractors. Maintained the SWPPP as required by AEP and Indiana.• Conduct on-boarding and site-specific orientation for new hires and subcontractors.• Increased Good Catches over 100%.

Longmont, Colorado, United States

Support BNB Construction by administering, implementing and maintaining the AGC Biologics Safety Program during expansion, remodel and construction of bio vector facility. Maintained proper work procedures during demo, hot work, impairments, crane operations. Coordinated safety procedures between multiple subcontractors.• Conduct on-boarding and site-specific orientation for new hires and subcontractors.

Denver, Colorado, United States

• Support DGC Construction by administering, implementing and maintaining the Hensel Phelps Safety Program during steel erection and install of trusses, columns, beams, stairs and handrails on the Denver Convention Center expansion project. • Conducted MEWP training, implementation and oversight, weekly inspections/audits, pre-pick plan meeting for crane operations. • Support DGC Construction and Turner Construction during steel erection at Denver International Airport for the UAL W Expansion project.

Frederick, Colorado, United States

• Support Black Cat Construction by administering, implementing and maintaining the BNB Safety Program during steel erection and install of columns, beams, stairs and handrails. • Conducted JSA training, implementation and oversight; firewatch for hot work; pre-pick plan meeting for crane operations.

Dumas, Tx

• Support Dahlgren Industrial by administering, implementing and maintaining the Safety Program during construction of a multi-level cheese/dairy processing plant including excavation, crane operations, working at heights/fall protection, civil work, hot work, forklift operations, scaffolding, electrical safety and respiratory protection.• Conducted JSA training, implementation and oversight; conducted job site, vehicle, equipment and safety gear audits and inspections; conducted in-house training and toolbox talks (fire extinguisher, angle grinder safety, hot work, silica awareness, ladder safety, respiratory protection, etc, , ,). • Developed a Safety Training Program based on the existing Safety Program.

Remote

• Support the HSE Dept by administering, implementing and maintaining the HSE program during substation and switchyard operations and construction including excavation, crane operations, working at heights, electrical safety and respiratory protection.• Conducted JSA training, implementation and oversight; conducted job site, vehicle, equipment and safety gear audits and inspections; conducted in-house training and toolbox talks (fire extinguisher, trench box, hot work, sloping, PPE, machine guarding, materials handling, etc, , ,). • Conducted injury/illness/incident/accident investigations.

New Mexico, United States

• Support the client by administering, implementing and maintaining the HSE program during substation and switchyard operations and construction including excavation, crane operations, working at heights and electrical safety.• Conducted JSA training, implementation and oversight; conducted job site, vehicle, equipment and safety gear audits and inspections; conducted in-house training and toolbox talks (fire extinguisher, trench box, hot work, sloping, PPE, machine guarding, materials handling, etc, , ,). • Coordinated with all subcontractors regarding daily tasks, JSA’s and inspections/audits.• Conducted injury/illness/incident/accident investigations.

Johnstown, Colorado

• Support the HSE Manager by administering, improving, implementing and maintaining the HSE program during pipeline operations and construction, including excavation, crane operations, working at heights, respiratory protection, hot work and oil & gas pipeline operations. • Conducted gas monitor calibration, atmospheric testing, hot work authorization and gas monitoring. • Conducted JSA training, implementation and oversight; conducted job site, vehicle, equipment and safety gear audits and inspections; conducted in-house training and toolbox talks (fire extinguisher, trench box, hot work, sloping, PPE, machine guarding, materials handling, etc, , ,). • Conducted injury/illness/incident/accident investigations, as well as post-accident and random drug testing in accordance with Drug & Alcohol Substance Abuse Program.• Implemented, conducted and managed respirator fit testing program.• Xcel: del Norte to Alamosa, CO 12 miles of 6" pipe; Meeker, CO reg station; Rifle, CO MAOP 6" pipe; Silverthorne, CO 9300ft of 8” pipe replacement; Fruita, CO 3” pipe support replacement, , , • Anadarko: Ft. Lupton, CO 2 miles of 6" pipe, valve station and pipe removal or upgrade throughout Brighton, CO. • Black Hills Energy: Laramie, WY 4 miles of 12” pipe construction, 7 miles of 16" pipe construction in Dubuque, IA.

Pampa, Texas

• Implement the EHS program for third party contractors at G2X/Pampa Fuels during turnaround including daily JSAs, safety equipment inspections, hot work gas monitoring, crane operations, materials handling and equipment audits. • Conducted injury/illness/incident/accident investigations, as well as post-accident and random drug testing in accordance with Drug & Alcohol Substance Abuse Program.• Civil construction: Addition of concrete slab for additional compressor. • Flue gas/heat exchanger upgrade. • Hot work: Addition of SWAN steam, water, air, nitrogen and process lines. • Improved weekly safety scores from 87-125.

Seattle And Alaska

•Administered an EHS program that assures control and prevention of accidents, incidents and injuries and mitigates hazards aboard 3 fish processing vessels with a crew of 250+ in Dutch Harbor, AK.• Conducted injury/illness/incident/accident investigations, as well as post-accident and random drug testing in accordance with company’s Drug & Alcohol Substance Abuse Program.•Administered Workers Comp programs and maintained OSHA 300 & 301 logs.•Review, evaluate, audit and provide all required safety training for crew and 3rd party contractors. •Conduct safety walks with supervisors and team members. Assure all required EHS activities are accomplished as required by regulation or policy, including local, state, OSHA, USCG and EPA. •Conducted daily Hot Work authorizations, Confined Space entry, atmospheric testing and JSA’s. •Induct new personnel to vessel safety and emergency instructions, including monthly USCG drills, fire safety, machine guarding, manufacturing safety, Emergency Action Plan (EAP), Emergency Evacuation, respirator fit testing, working at heights, crane operations, deck operations, HAZCOM, HAZMAT, PSM, forklift training and certification, and proper PPE. •Create, revise and maintain safety datasheets (SDS) and disseminate information to personnel. •Initiate, inspect, prepare and disseminate findings of weekly hygiene and safety reports. Contribute to weekly safety reports on health issues and onboard instructions and education in general hygiene, medical care and instructions to preventive medical and safety problems and advise for a healthy work and living condition.

Japan

• Provide safety advice and instructions during civil construction phase. Monitored worker activities and environment to include JSA review, equipment inspections and audits, gas, air and noise monitoring, excavations, hot work, working at heights, heavy equipment operations, crane operations, and industrial hygiene.• Conducted injury/illness/incident/accident investigations, as well as post-accident and random drug testing.• Managed construction contractor’s safety and health program. • Provide medical support to US expats and guard force. Conduct TCCC instruction for the guard force.

Iraq

• Provided ALS medical support to the Ugandan guard force and Triple Canopy expats in Iraq. Trained guard force to TCCC guidelines and protocols and use of an AED. Ensured all medical records were accounted for and maintained. • Also supported force protection operations as a Site Lead and Shift Supervisor by ensuring the guard force was equipped, trained and prepared for daily duties. Maintained equipment and sensitive items. Conducted daily safety assessments of guard posts and equipment.

Iraq

• Provided PsyOp support in USD-S, Iraq. Coordinated the integration of 2 tactical teams and a detachment with their supported units. Maintained all assigned weapons and sensitive items for the team. Supervised a tactical team and ensured they were trained and prepared for daily missions.• Provided medical support for a Tactical PsyOp team and a Tactical PsyOp detachment.

Camp Bullis, Tx

• Provide medical support for a PsyOp Co during field training. Coordinate and instruct Combat Lifesaver (CLS) and Tactical Care of the Combat Casualty (TC3) training for the company. Initiated field sanitation and aid station operations. Established ambulance and MEDEVAC operations. • As Team Leader, supervised and trained a Tactical PsyOp team in preparation for a deployment to Iraq. • Conducted Range Safety instruction during weapons qualifications.

Osha 511 General Industry

Shipyard Competent Person, Hse

Atmospheric testing, Confined space entry, Hot Work authorization

Osha 5410 Maritime