Mark Maguire Email & Phone Number

Australia

Frontline Inlec carrying out preventative, corrective and routine maintenance including breakdowns and major maintenance. Review and updating of maintenance procedures as required. • Manage the safe execution of maintenance activities in my team, ensuring all permits, drawings and schematics are understood. • Execute instrument and electrical maintenance in line with the maintenance plan, business priorities and operations management.• Support the continued plant safety, site integrity and reliability through the application of specific engineering standards.• Manage and maintain the effective and timely completion of electrical isolation and de-isolation of systems for work execution.• Understanding and implementing High Voltage switching programs.• Ensure proper reporting is maintained within the SAP-PM system to enable data collection for supporting analysis of performance.• Conduct safety initiatives such as risk assessments, JHA review and sign on and actively reporting incidents and any near misses. • Ensure all paperwork such as piping, and instrumentation diagrams or drawings (P&ID) and electrical schematics are read and understood by all work group members before the commencement of work, addressing any concerns, queries or questions.• Carry out detailed, close and visual hazardous area inspections on electrical and instrumentation equipment, as necessary.• Operate, maintain and troubleshoot PLC and Control systems as required. Honeywell and TriconexMember of the offshore Emergency Response Team(FTMO, RHI, Rescue from Height, Confined Space Rescue)

Frontline&Campaign Maintenance|North West Shelf

• Manage the safe execution of maintenance activities in my team, ensuring all permits, drawings and schematics are understood. • Execute instrument and electrical maintenance in line with the maintenance plan, business priorities and operations management.• Support the continued plant safety, site integrity and reliability through the application of specific engineering standards.• Manage and maintain the effective and timely completion of electrical isolation and de-isolation of systems for work execution.• Understanding and implementing High Voltage switching programs.• Oversee the conduct of troubleshooting on various instruments and electrical equipment, correcting problems and failures.• Ensure proper reporting is maintained within the SAP-PM system to enable data collection for supporting analysis of performance.• Conduct safety initiatives such as risk assessments, JHA review and sign on and actively reporting incidents and any near misses. • Ensure all paperwork such as piping, and instrumentation diagrams or drawings (P&ID) and electrical schematics are read and understood by all work group members before the commencement of work, addressing any concerns, queries or questions.• Developed and implemented a wide range of new work permits and procedures to ensure compliance with safety practices.• Prepare a wide range of reports to management regarding problems associated with plant and system controls, as needed.• Provide technical direction for instrumentation troubleshooting, calibration and tuning of instrumentation and control systems.• Carry out detailed, close and visual hazardous area inspections on electrical and instrumentation equipment, as necessary.• Operate, maintain and troubleshoot PLC and Control systems as required. Siemens, Allen&Bradley, Yokogowa, Emerson Delta V• Raising notifications (Z1) and work orders to capture high and low priority work.

Perth, Western Australia, Australia

• Executing instrument and electrical maintenance activities offshore in accordance with the maintenance plan, business priorities and operations management system• Supporting continued plant safety, integrity and reliability through the application of specific engineering standards and statutory requirements• Completion of electrical isolation/de-isolation of systems for work execution.• Troubleshooting instrument and electrical equipment problems and failures • Effectively and efficiently executing maintenance in accordance with priorities set, including day-to-day team composition and best solutions for breakdown work.• Ensure proper work history reporting in the SAP-PM system to enable data reporting and collection in supporting analysis of facilities performance and failures.• Actively undertook safety initiatives such as risk assessments, JHA review and sign on and actively reporting incidents and any near misses. • Ensuring all paperwork such as piping and instrumentation diagrams or drawings (P&ID) and electrical schematics are read and understood by all work group members before work commences• Developed and implemented work permits and procedures to ensure compliance with safety practices • Provided technical direction for instrumentation troubleshooting, calibration and tuning of the instrumentation and control system to ensure proper function • Provided reports to management regarding problems associated with plant and system controls• Carry out detailed, close and visual hazardous area inspections on electrical and instrumentation equipment.

Offshore Western Australia

TechnipFMC is a global leader in oil and gas projects, technologies, systems and services.In my role as Instrumentation and Control Technician, my duties involve developing and implementing working permit procedures that ensure compliance with safety practices, and managing and providing technical direction for instrumentation troubleshooting, as well as the calibration and tuning of instrumentation and control systems to ensure that the process control systems function properly. My achievements in this role demonstrate my ability to lead, direct and contribute to the development and implementation of innovative applied instrumentation knowledge. Combined with this is my leading by example and demonstrating compliance with all work health and safety (WHS) and environment initiatives, legislation, procedures and standards required on site.RESPONSIBILITIES AS TEAM LEADERManaged and provided technical direction for Instrumentation trouble shooting, calibration and tuning of instrumentation and control system to ensure that the process control systems function properly.Developed and implemented working permit procedures to ensure compliance with safety practices.Provided reports to management regarding problems associated with plant and system controls.Performed visual periodic inspections to determine the status of the instrumentation and control systems.Generating Punch list clearance items to ensure full completions and handover of the Instrumentation systems.

Onslow, Western Australia, Australia

Chevron’s Wheatstone LNG Project is a large renowned project that KSJV is presently contracted to work on. In my role, I worked diligently on downstream plant facilities, with responsibilities for safe and efficient instrumentation work, such as pre-commissioning and commissioning activities throughout the plant. I was also accountable for extra low voltage isolation permits in my role as Work Team Leader, which covered construction, commissioning and operational permits. Responsibilities as per Barrow Island below

Barrow Island

Chevron’s Barrow Island Gas Plant Gorgon Project is a large renowned project that CKJV was contracted to work on. In my role, I worked both upstream and downstream plant facilities, with responsibilities for safe and efficient instrumentation work such as commissioning and construction. Additionally, I was accountable for extra low voltage isolation permits in my role as Work Team Leader, which covered construction, commissioning and operational permits. RESPONSIBILITIES AS TECHNICIAN Testing SIS systems and all fire and gas instrumentation, PLCs and Distributed Control System (DCS) Yokogawa, smart instruments and Foundation FieldbusTesting of vibration, temperature transmitters and setting gap voltages on Bentley Nevada condition monitoring systemsMotor Loop checking, Racking in/out of test position to carry out signal checksMaintained all test records for both calibrations and loop checks to quality control and engineering standardsEnsured all corrections are redlined on specification sheets and drawingsTuned field controllers and adjusted P&ID settings to tune the loopLoop checking according to the instrument loop drawing (ILD)Evaluated and verifiied of all technical data from clientEnsured all test equipment was calibrated and maintainedTroubleshooting and fault-finding control loopsFunctional Testing of Integrated Control SystemsSetting up, tuning and function checking of pneumatic control valves and motorised valves Performed signal simulation and functional loop testing of field instruments with the coordination of Operator on DCS console to obtain and confirm I/O signals.KEY ACHIEVEMENTIn this role, I had various recognitions in relation to safety, such as safety initiative suggestions, efficient work and advocating safe behaviours. A key aspect was achieving 400 incident and accident-free days on this project. These commendations significantly increased my knowledge and standing as a key influence in safety issues on site.

Pilbara,Wa

Ansaldo STS is a Spanish-owned mass transit specialist, with operations around the world focusing on the development and implementation of innovative transport signalling and management systems. In this role, I was working on two Rio Tinto Projects, with accountability for managing the project work. The first project, AHOB, consisted of installing all the automation for trains to be driverless, which included significant teamwork and working under permit systems. The second was at an iron ore mine site and included maintenance work packs that had to be attended to maintaining belts and motors, for example. Responsibilities:Ensured compliance with strict health and safety procedures and policies Completed Job Safety Analysis (JSA) documentation for each job and obtaining signatures from colleagues and senior project staff prior to starting workLoop checking, fault finding and fault rectification for low voltage faults in locomotivesInstalled new electrical and instrumentation systems in locomotives in line with technical specificationsIdentified technical issues and worked closely with Engineers to resolve issuesLiaised directly with supervisors and superintendents to plan and schedule workAchievements:Worked successfully in a collaborative mining industry environmentCompleted training to suit the needs of the job including fire and emergency response training, first aid certifications, and site-compliant 4WD trainingDeveloped excellent troubleshooting and problem resolution skillsEffectively managed the allocation of human and material resources for each jobDemonstrated effective time management and project management skills to complete work

Perth,Wa

Strong Electrical is a family-owned company specialising in providing maintenance, installation and commissioning services to a wide range of commercial and industrial clients. In this role, I worked on commercial projects, and then completed installation and commissioning modules for demountables on mine sites and office buildings. As Leading Hand, I had responsibility for managing my own projects and for the apprentices and other tradesmen that accompanied me. Responsibilities:Maintained and repaired new and existing commercial and industrial electrical systemsTested electrical systems and recorded test results for insulation resistance testing, fault loop impedance testing, continuity, polarity and resistance and RCD testing after commissioningFound and rectified electrical faults, including faults with heating and lighting control circuitsDocumented insulation resistance, earth continuity, polarity, resistance of equipotential earth bonds, resistance of phase and earth conductors and RCD trip times.Completed a Job Safety Analysis (JSA) for each job and obtained signatures from colleagues and apprentices Achievements:A supervisory role in the company, with responsibility for managing my own projects Responsible for the apprentices and other tradesmen that accompanied meResponsible for all paperwork including test results and quality assurance formsDeveloped excellent troubleshooting and problem resolution skillsOn job completion I was responsible for walking the job/system with the client to ensure satisfaction of the work completed and to sign off the job/system for handoverPracticed effective time management and project management skills to complete the job to budget and within the set time frame

Perth, Australia

Amber Electrical Services offer commercial, residential, automation and trenching services. They are also authorised service and connection providers. In this role, I installed new electrical systems in Department of Defence housing apartment blocks. After working for four months, I undertook Leading Hand tasks, and was then quickly promoted to Supervisor. ResponsibilitiesInstalled new electrical systems in Department of Defence housing apartment blocksRead and interpreted drawings of pre-lays of conduit and junction boxesUsed industrial applications, such as steel conduit systems, a cable tray and ladderInstalled cable tray and trunking around the distribution board, which allowed for cables to be glanded and terminatedSupplied power to several site distribution boardsUsed tag and lockout procedures to isolate power and then install cablesLiaised with supervisor and site supervisor as necessaryTrained and supervised groups of apprenticesAchievementsWorked successfully on a big project involving 30 apartments in two-storey apartment blocks. Promoted to lead hand Became a supervisor of my own group and worked independently

Perth, Australia

Commelec offer a broad range of high-quality contracting services for private clients and the public sector in domestic, commercial and industrial markets. They provide services such as office fit-outs, mains upgrades demountable buildings and camps, mechanical power supplies, network and communications, fire alarms and security systems. At Commelec, I was responsible for a number of buildings, with two to three electricians working with me to complete worksite building projects for Rio Tinto and the Wheatstone Project in Onslow, installing electrical systems and commissioning. During my time here I worked on transportable buildings for remote sites in Australia, and my central role was to oversee the wiring installations of the highly specified buildings. It was essential I had good time management as these projects had strict deadlines. The work was to an especially high standard as nothing less was acceptable. In addition, I also traveled to the Chevron gas mining facility in Wheatstone where we assisted in rectification work of the facility.

Advanced Diploma In Industrial Automation, Automation Engineer Technology/Technician

Completed Advanced studies in the Automation, Instrumentation and control field.

Certificate Iii In Instrumentation And Control: Instrumenatation Technician, Electrical And Electronics Engineering

Certificate Iv In Electrical Instrumentation, A

Certificate Iii In Electrotechnology, Electrical And Electronics Engineering

Fetac Level 6 Advanced Certificate In Electrical Craftsmanship, Electrical And Electronics Engineering

National Craft Certificate In Electrical Engineering/Technician, Electricial Technician, A

Completed an Electrical Apprenticeship

Certificate Iv In Hazardous Areas, Electrical Engineering Technologies/Technicians