Matt K. Email & Phone Number

St. Louis, Mo, Us

Belleville, Il, Us

- Audit and revise heavy underground electrical substation distribution operating drawings for electric utility client in downtown and major metropolitan areas.- Identify and maintain database for all paper-insulated lead-covered (PILC) cables, to be replaced with Ethylene Propylene Rubber (EPR) cables to increase circuit reliability.- Identify and maintain database for all PILC transitions and splices to be replaced with EPR joints and splices to increase reliability and prevent manhole fires.- Maintain and update engineering excel and access based database for all existing and new manholes for inspection cycles. In addition, to support circuit route diversification, automation and redundancies to increase circuit reliability and minimize outages in the event of circuit and or substation failures.

Retail CBD Consultant. Specializing in helping individuals and small businesses enter the CBD industry.www.cardinalcbdstore.com

St Charles, Missouri, Us

St Charles, Missouri, Us

Develop, plan, direct, and coordinate manufacturing processes in manufacturing plant. Essential Duties and Responsibilities include the following:• Evaluate manufacturing process flow• Develop, evaluate, and improve manufacturing methods• Improve manufacturing efficiency by analyzing and planning work flow, space requirements and equipment layout.• Interface with vendors and customer representatives confirming manufacturing processes.• Provide manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; estimating future requirements.• Provide manufacturing engineering information by answering technical questions and requests.• Maintain product and process data base by writing manufacturing planning instructions.• Analyze and plan work force utilization, space requirements, workflow, design layout of equipment and workspace for maximum efficiency.• Confer with planning staff concerning product design and tooling to ensure efficient production methods.• Confer with vendors to determine product specifications and arrange for purchase of equipment, materials, or parts, and evaluate products according to specifications and quality standards.• Estimate production times, staffing requirements, and related costs to provide information for management decisions.• Confer with management, OEM engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes.• Apply statistical methods to estimate future manufacturing requirements and potential.Projects Supported:• Embraer KC390• Gulfstream G650 G500/G600 G280• Boeing 737 747 767 777/777X 787• Honda Jet• MRJDaily experience with Catia V5, Teamcenter, AS400, MS Office and Jobscope.

St Charles, Missouri, Us

Perform audits in accordance with AS9100 (based on ISO 9001) quality system requirements. Audit shop floor, management, quality, engineering, etc to verify compliance.Develop and present a detailed report to management.Enter non-conformances in Q-Pulse

Basel, Bs, Ch

• Assigned to provide support to Structures Engineering team & cross train while continuing to manage Weight and Balance projects. • Use AutoCad, Solidworks and CATIA to create detailed part, assemblies and install drawings. • Provide liaison engineering support on Green and MRO aircraft for part, assemblies, install, engineering repair orders and engineering orders.Green aircraft engineering experience includes:• Bombardier Global 6000• Bombardier Challenger 605MRO aircraft engineering experience includes:• Bombardier: Global Express/XRS/5000/6000; Challenger 300/601/604/605• Gulfstream: GIV, GV, G450, G550, G650• Falcon 50/900/2000Examples of MRO ERO's Include:• Composite floorboard repairs that exceed SRM limitations.• Composite fairings with damage outside of SRM limitations.• Miss-drilled holes in pressure bulkheads.Process improvements projects include:• Research and test new composite alternative assemblies to reduce build time by 50%, weight by 20% and eliminate the need for use of razor blades from assembly process for safety purposes. Total savings was not researched beyond ROI of 0.5 aircraft built.• Research material equivalence for a specific part that was ordered in mass quantities. Part could be purchased at half cost elsewhere but could not be used until structural equivalency was proven in order to continue using the known stress allowables. Total savings of in excess of $200k/yr.

Basel, Bs, Ch

Weight and Balance (Mass Properties) Duties are to Write, check and approve the following reports:• Interior Weight Estimate: Estimates the weight and arm (location fwd/aft) of every component added to the aircraft during the interior completion phase.• Incoming Weight and Balance: Establishes the incoming (green) weight of the empty aircraft without an interior.• Monument and Placard Report: Used to break down the exact weight and location fwd/aft/inbd/outbd/up/down of each component added to sections of the aircraft. • Latch Analysis: Analyzes the margin of safety for every latch installed throughout the cabin on drawers, doors, etc. • Completed Weight and Balance: Establishes the Basic Operating Empty Weight of the aircraft as well as a sample loading or exact loading of equipment, baggage and passengers for a mission. • STC Update Weight and Balance: Details every items weight and arm impact for an STC package to come up with a total weight and moment impact for that specific STC. • Update Automated Weight and Balance System (AWBS) reports for C20/C37 CLS Program.Additional Duties and Experience:• Lead research and design improvement projects in engineering. • Participate in weight reduction efforts. • Daily experience with Excel, Word, Outlook, AutoCAD, Solidworks, Smarteam, FEMAP and VBA. • Assigned inspection authority to sign off Weight and Balance Reports.• Use VBA within excel and word to automate reports. • Update Manufacturing Process Specifications and Engineering Process Specifications.Cross train in the following:Stress Engineering • Analyze drawings in reports using FEMAP and using hand calculations to determine Margin of Safety.• Write stress reports.• Develop tool to quickly search where drawings had been analyzed previously to reuse data.Technical Publications• Convert 2D drawings to 3D to create isometric views. • Modify views from Autocad in Adobe Illustrator.Inspection• Buying off parts in sheetmetal backshop.

Basel, Bs, Ch

Aircraft experience:• Gulfstream III, IV, V, 550 (Military C-20 & C-37)• Perform depot (heavy check) level maintenance, inspections, repairs and modifications. • Provide engineering with powerpoint presentations of corrosion or damage. • Perform engine run, taxi and engine rigging.• Act as interim lead by assigning tasks, supervising work for best safety practices, shift change tie in, maintain tool inventory and closing hangar for evening.• Perform avionics troubleshooting, modifications, pin & de pin or terminate connectors, solder and de-solder.• Perform sheet metal work such as skin changes to fuselage, vertical and horizontal stab.• R&R engine, landing gear, etc.• Over 12 cap angle repairs to include removing the horizontal and vertical stab.

Basel, Bs, Ch

Perform maintenance & inspections on the following airframes:• Gulfstream III, IV, V, 150, 280, 450, 550• Global Express, 5000, XRS, 6000• Challenger 300, 600, 601, 604, 605, 850, 870• Boeing BBJ (737-700)• Hawker• Falcon 20, 50, 900• Embraer Legacy, LineageCross trained in the following support shops:• Composite • Fabricate composite interior liner panels and duct work • Perform repairs to radome and other fairings.• Avionics • Build, install and troubleshoot cabin management system wiring harness.

Bridgeton, Mo, Us

• Perform maintenance on Embraer 145 and Bombardier CRJ 700 aircraft. • Engine run and taxi qualified.• Taxi aircraft back and forth terminal to hangar for maintenance. • Ground Security Cordinator duties included accompany passengers on charter flights and maintain aircraft in field to complete mission.• Road trips to support AOG aircraft for maintenance and avionics issues.

• Opening/Closing the store• Completing daily paperwork and various administrative duties• Lead other associates and run store.

Lexington, Kentucky, Us

• Opening/Closing the store• Providing customers a maintenance history of their vehicle• Selling of other maintenance services

Bachelor Of Science (B.S.), Mechanical Engineering

Certificate, Boeing 737-700/-800

Certificate, Gulfstream Iv/300/400 Initial & Engine Run And Taxi

Associate'S Degree, Occupational Science In Aviation Maintenance Technology