Exxon mobile project on Stingray vessel for shallow water pipelay

Monitoring welder qualification test and review documentation for project.Monitoring quality control of the contractor Saipem to confirm correct execution of ITP.Reviewing contractors reports before counter signing for client.Complying with all relevant procedures and deliver high standards of safety performance during all operations.Responding promptly and effectively to changing circumstances, planning for contingencies and managing conflicting priorities.Communicating effectively at all levels, with multinational workforce, as well as train, lead and motivate teams of professionals. Ensuring quality assurance of all work scopes are maintained, and all work is performed in accordance with company policies and the Health and Safety at work act.Using excellent communication skills at all levels while remaining dedicated to ensuring understanding of company requirements and procedures.Implementing and supporting effective working practices and systems as required to continuously improve work scope delivery. Working flexibly to accommodate the changing needs of the business, working long hours and taking on additional responsibilities. Supporting in all elements of health, safety, security and environmental aspect for the organisation. Familiar with the permit to work system and like to implement a good safety culture throughout site. Knowledge of risk assessments and safe systems of work, able to interpret and advocate site policies and procedures to other workers with minimum supervision.

Working on a vessel upgrade to DJ single lay and fabricating new stinger and hinges to fasten to vessel. Completing heavy engineering of new pipelay stinger, and large hinge brackets in DDWD shipyard.Monitoring construction and fitting of the 2 large hinge brackets and pipelay stinger and confirming correct sizes and welding sequence according to isometric drawings and code AWS D1.1.Confirming the weld maps are correct for final As-built package.Monitoring the upgrade of vessel with welding of new mooring brackets and firing line machinery at Dry Dock World Dubai.Monitoring quality control of the contractor DDWD to confirm correct execution of ITP.Attending daily meetings regarding quality control on vessel.Reviewing contractors reports in final As-built package before counter signing for Saipem.

Monitoring welder qualification test and review documentation for project.Monitoring quality control of the contractor Saipem to confirm correct execution of ITP. Reviewing contractors reports before counter signing for client.

Leith, Edinburgh spoolbase 42 CS stalk’s (500m x 12”) 18 CS stalk’s (500m x 6”)Monitoring all welding process and fit up.Checking correct pipe is used and in correct line up.

Borealis PLV - Shell Arran connection 60km pipe in pipe 18”CS outer pipe + 12”CRA inner pipePreparing daily reports for inspectors. Collecting data from vessel QC team, both night and day shift (consisting of 2 welding inspectors, 2 coating inspectors and 2 pipe tally). Confirming all collected data is correct against project relevant documentation such as WPS, project specification, client specification, etc.Confirming inspectors and welders’ qualifications are valid and in date, checking calibration certs, machines and tools are valid and in date.Confirming consumable certs and material ID.Verifying the correct implementation of approved ITP.Entering all data into Subsea7`s LAYFAB system for final MDR package.

Baltic Connector Project: 77km of 20” Bidirectional gas pipeline, with 2 x shore pulls + above water tie in, Gulf of FinlandMonitor quality control of the contractor Allseas to confirm correct execution of ITP. Supervising a client QC team consisting of Coating and Welding Inspectors.Checking quality control plans with reference to welding and coating activities.Checking project relevant documentation such as calibration cert logs, consumable certs logs, personnel qualification logs before verifying and counter signing on behalf of clientVerifying the correct implementation of approved ITP, witnessing welder, coating qualifications and visual inspections undertaken by contractor QCMonitoring all contractors QC related activities and making daily full report of any findings in a client log for construction manager review.Reviewing and counter signing all contractors’ daily reports for welding, coating and NDT inspection.

ENI/EGPC JV Zohr Field Development Project (Phase 3):- 18”Pipeline, Egypt, Mediterranean Sea / Statoil Petroleum As – Johan Sverdrup: -36”+18” Export Oil and Gas Pipeline Installation- Norway, North Sea / ENI/EGPC JV Zohr Field Development Project (Phase 2):- 18”+30” Pipeline, Egypt, Mediterranean SeaSupervising the 14-man QC Team of Coating/Welding Inspectors and Pipe Tally to cover the stages set out in ITP (inspection and test plan) using the codes and standards in the documents provided in the MDR.Attending daily progress meetings with QC Coordinators, other relevant Supervisors, Client and Third Party Representatives.Checking quality control plans with reference to welding and coating activities.Checking the availability and adequacy of consumables, equipment and instrumentation used for welding and coating execution and control.Verifying the material and equipment are correctly received, stored, preserved, calibrated, and handled, identified and traceable.Supporting and checking the evaluation of the qualification of inspection personnel in charge of works, verifying work procedures, including those relating to special processes.Supervising and witnessing inspections, checking reports and documentation issued by inspectors and verify the collection of required records.Verifying those tests, controls and inspections are carried out according to quality control plans / inspection test plans, checking the collection of relevant documentation also for the mechanical completion approval and personnel have access to all required project documentation.Preparing the records of several `offshore installation aids` including A+R heads, laydown heads and shrouds of various sizes. Collecting data such as correct material certificates.

FDS Vessel J lay Senior QC Inspector - ENI Angola Block 15/06 West Hub Development Project – Ochigufu Field – 9” Water Injection Quadruple Pipe & Deep Water CS Pipe Installation And Umbilical Pipe InstallationWelding, conducting WQT`s, once welding is finished weld has passed applicable NDT methods marking out test coupons for destructive testing (bend tests and macros) ID stamp set pieces.Preparing relevant welder approval certificates on completion of successful WQT for `As-built`. monitoring pipe fit up, monitor parameters on welding of both production welds and repair welds making sure within allowances of particular WPS used. Visually inspecting weld caps on completion of welds. Preparing VI and surveillance reports for the day`s activity.During installation of flexible umbilical’s, performing anode continuity test between sacrificial anodes on the ½ shell flexible umbilical pipe end protections and fastening bolts. Performing anode non-continuity test between sacrificial anode on buckle and ceramic connection on the umbilical gooseneck. Witnessing torque tightness tests on all fastening bolts. Saipem - Castorone PLV Welding QC Supervisor - ENI/EGPC JV Zohr Field Development Project (Phase 1): 3x Pipelines 26”, 14” + 8” (Petrobel), Egyptian Mediterranean- Clara NW Pipeline Installation Shepherds Fabrications Ltd, Asia QC Engineer - The Palms, Koh Samui, ThailandEnsuring the quality of (primarily onsite) fabrication of 3x heavy-duty carbon steel staircases and multi-level flooring with I-beams and overhead DJ booth, for a quality certificate, required for public liability insurance.Assuring high standards of all welds carried out by a coded welder.Saipem - Castoro 6 PLV Welding QA/QC Supervisor - ENI S.p.A: CLARA NW 14” Pipeline installation, Greece (Qualifications) And Italy (Pipelay)Promoted from Welding QC Inspector after success of INPEX project.

INPEX Ichthys Project: 890km, 42” Gas export Pipeline - Castorone PLV, Western Australia / PDVSA SA Dragon Cigma Project: 36” Pipeline (Phase 3) - C7 PLV, Gulf of Venezuela / MICOPERI/PEMEX May-A to May-B: Pipeline installation (3km) - C10 PLV, Gulf of Mexico / Chevron Jack-St Malo Project: Oil Export Pipeline - Castarone PLV, Gulf of Mexico / Cardon IV Perla Field Early Production Development Project: 30” Pipeline – C10 PLV, Venezuela / PDVSA SA Dragon Cigma Project: 36” Pipeline (Phase 1) - C10 PLV, Gulf of Venezuela Ensuring the output of the Welding Team adhered to all industry regulations and client specifications/operations comply with the approved ITPs and Quality Plans by:Inspecting materials to ensure quality met criteria set out in procedure and checking material mill certificates, ensuring consumables were applicable to each specific job. Carrying out WQTs to assess skills according to relevant WPS, i.e. GMAW, GMAW-STT (surface tension transfer), PASSO, SWS TWIN/MONO + SWS 500, SAW, GS-FCAW, SMAW and MIG.Monitoring NDT (UT or RT) and Destructive Tests (Macro + Bend tests) carried out on test piece to assure quality.Monitoring joint fit-up, ensuring correct joint design/size was used and monitoring double and triple joints in SAW.Conducting welder surveillances, recording the welding in progress to ensure accuracy of consumables, voltage, amperage, travel speed, wire feed, heat input and advising Welding Foreman of any necessary adjustments.Monitoring weld stations along the firing line using orbital SWS machines and recording the welders rotating on each welding station, visually inspecting finished weld cap for possible surface breaking discontinuities.Monitoring NDT testing of pipeline using MT, MUT, AUT and RT and checking results, including radiographs and AUT scans, and monitoring and record any necessary repair work according to applicable repair WPS.

Working offshore and onshore on oil rigs and shipyards around South-East Asia working on a 6 weeks on 3 weeks off rotation. Working for clients such as Shell on Nobles semi submersible `Clyde Boudreaux`, for Seadrill on the `West Defender` a large jack up rig, Transocean`s `DWE` drill ship being maintained in the Singapore shipyard, Frigstads `Kan Tan IV` a semi submersible rig, Gulf Drilling Services a new jack up rig `Al Jazz-ra` being put together in the Singapore shipyards and adhering to all their different safety policies. This role has provided me with extensive international experience offshore working on many different oil rigs, fixed platforms, semi-submersible platforms, jack ups, drill ships both out at sea and while being maintained in the Singapore shipyards.Visual inspection and reporting of welds and bolting on the fabrication of derrick structures and general fabrications working to details on isometric drawings.Inspecting pipe welds on flow lines & spool pipes critical to plant integrity. Quality control and improving quality of workmanship by providing constructive feedback to welders and bolting technicians.Working within a specialist rope access inspection team carrying out visual inspection and NDT by magnetic particle inspection & dye penetrant inspection and assisting in eddy current inspection & thickness gauge ultrasonic inspection. Testing and reporting on the SWL load of pad-eyes and runway beams. Dropped object surveys.Once testing and reports are completed I was responsible for compiling detailed reports for client.

I was employed on the fabrication maintenance team to work on the Elgin fixed platform in the North Sea, UK sub contracting to `Total`.Duties included aiding in inspections of general fabrications including carrying out Magnetic Particle Inspection, Penetrant Testing and visual inspection of general fabrications and pipe welds critical to plant integrity.

I was employed on the fabrication maintenance team to work on the Alwyn fixed platform in the North Sea, UK sub contracting to `Total`.Throughout my role a sound knowledge of health and safety was needed and used on a daily basis.General duties included shot blasting areas marked for maintained on general fabrications