Mayurkumar Patel Email & Phone Number

Tiverton, Ontario, Canada

• Some of my tasks at Bruce Power includes install, commission, inspect, troubleshoot, service, maintain and overhaul and assist with the design for all electrical/ electronic/control/protection/telecommunication and testing equipment, associated with generating stations and facilities. • Prepare electrical, control, instrumentation, protection and telecommunication drawings, and bills of material. Carry out document maintenance activities.• Co-ordinate large projects or highly complex… Show more • Some of my tasks at Bruce Power includes install, commission, inspect, troubleshoot, service, maintain and overhaul and assist with the design for all electrical/ electronic/control/protection/telecommunication and testing equipment, associated with generating stations and facilities. • Prepare electrical, control, instrumentation, protection and telecommunication drawings, and bills of material. Carry out document maintenance activities.• Co-ordinate large projects or highly complex maintenance enhancements related to the installation of new electrical and control systems, or the replacement of existing systems with new technologies.• Carry out contract coordination and inspections to ensure effective quality assurance.• Setup, install, programming and connecting of servers/ network switches/ modems/ routes/ gateways. Installation, repairs, and commissioning of new network cables.• Modify, Commission, and Maintain system in accordance with Regulatory Governance and CSNC.• Commission, programming, loop testing and perform field testing on various protection devices used in the power industry.• Determine generating system reliability and power system production. Develop and maintain supplementary computer programs to facilitate analysis.• Participate in studies associated with energy production, load and capacity, demand management, etc., and provide regular and on-demand reports. Establish and maintain documentation / program files.• Perform all Level Work Protection activities.• Accountable for the health, safety & well being of self and others, in accordance with technical/operating procedures and standards, and includes the development of technical/ operating solutions to problems.• Writing work instruction for newly installed instrumentation in the plant. • Expert understanding of software and systems includes MAXIMO, TEMPUS, CONTENT SERVER, WORKDAY, DEVONWAY, CMMS, SAP, BlueCielo, BMS, MS office, MS outlook, MS Teams. Show less

Hamilton, Ontario, Canada

• Responsible for providing leadership to the team involved in steel manufacturing.• Actively involved in day-to-day meetings and to represent Instrumentation and Electronics group in a professional manner.• Assigning tasks to team members and giving them specific directions and procedures to follow in carrying out assigned tasks.• Motivate team members to enhance production quantity and at the same time maintain high production standards.• Recognizes the contributions of every… Show more • Responsible for providing leadership to the team involved in steel manufacturing.• Actively involved in day-to-day meetings and to represent Instrumentation and Electronics group in a professional manner.• Assigning tasks to team members and giving them specific directions and procedures to follow in carrying out assigned tasks.• Motivate team members to enhance production quantity and at the same time maintain high production standards.• Recognizes the contributions of every team member and encourages them to work together in harmony, sharing ideas and maintaining good relationships in the execution of production tasks.• Places the safety of the team members in high esteem and educates them on safety tips and procedures to adhere to during day-to-day tasks.• Educate team memberson how to handle emergencies that may arise in the course of work, and ensures that the site is free of any form of danger, and is safe for team members to do their job.• Keep records of workers performance.• Keep records of equipment, budgets, and supplies, and make them available to management for evaluation.• Create work schedule for workers and ensure that they strictly adhere to it; take attendance to ensure regularity and promptness of workers to duty.• Providing 24/7 on-call support to the production. Show less

Hamilton, Ontario, Canada

• Formulate a plan, review and analyze preventive maintenance strategy for the equipment instrumentation in order to achieve highest efficiency of the activities for reliable and safe operation. • Supervise and groom Junior Instrument individual to develop technical knowledge, skills, and competencies to produce potential talent for future business needs. • Maintain and manage all upgrades pertaining to automation in accordance to Standard Operating… Show more • Formulate a plan, review and analyze preventive maintenance strategy for the equipment instrumentation in order to achieve highest efficiency of the activities for reliable and safe operation. • Supervise and groom Junior Instrument individual to develop technical knowledge, skills, and competencies to produce potential talent for future business needs. • Maintain and manage all upgrades pertaining to automation in accordance to Standard Operating Plan, daily operating Instructions, standing Instructions, and site Health, Safety, Security, Environment procedures (HSSE).• Develop the plan, scope and lead the execution of shutdown works for instrumentation to ensure completion within the specified window.• Troubleshoot, calibrate and field repairs to all instrumentation equipment.• Install, test, troubleshoot Programmable Logic Controllers (PLC's), automation and interface equipment to increase and maintain plant reliability.• Attend to technical query by operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation.• Provide technical advice during troubleshooting and corrective action of instrument breakdown or failures to find the root cause and best solution to restore the functionality back to normal. • Identify, study, propose and implement area for improvement (project) in the field of instrumentation to enhance operation and improve total equipment reliability.• Represent company and participate actively in any meetings and discussion. • Provide inputs to maintenance planner with regards to instrument maintenance activities for his consolidation into Integrated Operation Plan (IOP).• Provide support to Equipment Specialist for selection, design and instrument upgrade in the plant. Show less

Hamilton, Ontario, Canada

•Installation, troubleshoot, calibration and maintenance various types of Process Control instruments and DCS control interfaces, level, flow, temperature and pressure measurement equipment, analyzers and vibration measurement devices.•Mentoring new employees, coaching and instructing apprentices.•Manage plant electrical equipment upsets, upgrades of electrical control panels, procedures for building, rewiring, interconnecting of completed control panels, abnormal conditions and… Show more •Installation, troubleshoot, calibration and maintenance various types of Process Control instruments and DCS control interfaces, level, flow, temperature and pressure measurement equipment, analyzers and vibration measurement devices.•Mentoring new employees, coaching and instructing apprentices.•Manage plant electrical equipment upsets, upgrades of electrical control panels, procedures for building, rewiring, interconnecting of completed control panels, abnormal conditions and subsequent incidents/plant emergencies and subsequent follow-up.•Troubleshoot electrical and electronics equipment and components for continuity, current, voltage and resistance.•Troubleshoot, calibration and field repairs to control valves, positioners, and actuators.•Writing work instruction for newly installed instrumentation in the plant. •Familiar with Allen Bradley PLC’s includes ControlLogix, MicroLogix and RS Logix 500/5000.•Familiar with SCADA system includes Factory Talk view ME and SE, Panel view, RS VIEW 32 and INTOUCH-Wonder ware software.•Installation, testing, troubleshoot Programmable Logic Controllers (PLC's), automation and interface equipment to increase and maintain plant reliability.•Swagelok tubing and fittings equipment.•Conduct preventive maintenance and keep maintenance records up to date in CMMS.•Install, test, troubleshoot and repair fire and gas detection equipment.•Troubleshoot, calibrate, maintain and repair Pneumatic and Hydraulic equipment.•Detailed knowledge of TREX, HART communicators and various other communicators.•Installation and Calibration of PH, Turbidity, Silica, Conductivity & Chlorine analyzer.•DCS loop testing for all kind of pressure, level, flow and temperature instruments. •Chemical feed pump testing, calibration, I/O checks in house and field.•Expert understanding of software and systems includes CMMS, SAP, BlueCielo, MS office, MS outlook. Show less

Fort Mcmurray, Alberta

Some of my task at Imperial Oil includes Nuclear Device Testing & Monitoring.Mentoring of new employees.Instrumentation, maintenance and service in Froth, Utilities & Extraction plant area.Repair and calibrate field devices, preventive maintenance. Control Valves troubleshooting, repair and maintenance.Swage lok instruments tubing and fittings.Interpreted and worked from blueprints, control drawings, P&I diagrams, flow diagrams and other specifications and using the… Show more Some of my task at Imperial Oil includes Nuclear Device Testing & Monitoring.Mentoring of new employees.Instrumentation, maintenance and service in Froth, Utilities & Extraction plant area.Repair and calibrate field devices, preventive maintenance. Control Valves troubleshooting, repair and maintenance.Swage lok instruments tubing and fittings.Interpreted and worked from blueprints, control drawings, P&I diagrams, flow diagrams and other specifications and using the documentation to troubleshoot the problem as per standard procedures given.Honeywell optical gas detector and line of sight calibration and function test.Calibration and maintenance of Auto samplers and Analyzers.Calibration of all types of PIT, LIT, FIT, Pressure switch, Pressure gauge, Temperature elements using a HART or analog, Gas sensor troubleshooting and calibration. Show less

Bachelor Of Engineering - Be, Instrumentation And Control, Distinction

Certification, Electrical Technician

Activities and Societies: Electrical appliances and wiring