Chukwuemeka Trinity Mbadimma Email & Phone Number

* Safely carries out daily operation of the MPAC Synchro Langepac machine * Interpret basic machinery fault errors on the HMI. Also Safely and timely carries out first-level maintenance tasks and fault fixing to keep the machine in production. * Carries out Total Productive Maintenance (TPM) and Planned Preventive Maintence (PPM)* Undertake pack sizes.

*Safely carry out daily operation of the MPAC machine*Use the GPS1 and GPS2 Machine Control to accurately input and record data*Interpret basic machinery fault errors on the HMI and safely and timely carry out fault resolution to keep the machine in production and meet set targets.*Safely and timely carry out minor maintenance tasks to reduce machine.

As an arm of the Charity Organization, we carry out weekly Collection, Sorting, and Distribution of food & beverage items to the needySKILLS*Interpersonal skills *Effective communication *Willingness to help*Multicultural competence

Akwa Ibom, Nigeria

• Resigned from my contract services due to relocation***
• Actively participating in interventions and hazard identification, reporting, mitigation and/or closure as capable.
• Occasionally leads a team of vendour Field Service Representative (FSR) to execute Planned Preventive Maintenance (PPM) activities on Gas Turbines. Coordinate the team in a daily Tool box meeting and work activities.
• Work with team, as an Instrument and Electrical Technician, on ExxonMobil offshore & onshore facilities to safely and timely carry out Planned Preventive Maintenance on Gas Turbines, including Siemens RB2-11 GT engine.
• Work with team to safely and timely execute Gas Turbine engine change-out on Siemens RB2-11, Solar Turbines Centaur 40 & 50, Solar Turbines Taurus 60, General Electric LM2500
• Preparing and processing of daily Work Permits for the day’s job and sending of reports on activities carried out.SKILLS/COMPETENCE*Strong adherence to safety *Project management *Leadership skill *Problem solving.

Eket, Akwa Ibom State

• We Safely, Neatly, and Professionally deliver clean, renewable ( Solar) energy system to residents, offices, farms, schools and hotels. No noise; no emission; no maintenance; zero running cost
• Carry out load analysis & site assessment, where possible, and subsequently design a suitable Inverter System and/or Solar system setup for various end-users
• Carry out proper troubleshooting on failed inverter and/or solar system setup, and subsequently offer corrective actions on the system
• Draft training outline and training manual for intending Solar system enthusiasts.
• Also carry out classroom and practical Training for Solar system Trainees
• Carry out maintenance activities on Inverter system and/or Solar system setup

Eket, Akwa Ibom, Nigeria

• Temporarily laid off due to Covid-19 pandemic *
• Worked with team, as an Instrument and Electrical Technician, on ExxonMobil offshore & onshore facilities to safely and timely carry out 4000-hr & 8000-hr Preventive Maintenance on Gas Turbines, including Siemens.
• Worked with team to safely and timely execute Gas Turbine engine change-out on Siemens RB2-11, Solar Turbines Centaur 40 & 50, Solar Turbines Taurus 60, General Electric LM2500
• Carried out routine maintenance (like detergent/water washing, Borescope, air inlet filter change-out) on Gas Turbine Engines
• Carried out Preventive Maintenance on the alternators, and associated devices, of Solar Turbines Centaur 40 and Taurus 60
• Carried out Preventive Maintenance on the associated electric motors and the controls of Siemens and Solar Turbines Gas Turbine Engines

Eket, Akwa Ibom, Nigeria

• Gained knowledge of Motor Control Centre, Switchgear, etc. carried out re-wiring of a cell within a Motor Control Centre (MCC)
• Carried out design, drafting, and wiring of various Electric Motor controls for both local (MCC) and field operation. Also carried out troubleshooting and rectification on the system
• Worked with team members to carried out Preventive Maintenance on electrical devices and equipment including, but not limited to: 480V, 4.16KV, & 6KV Electric Motors; 480V Diesel Engine Generators; 4.16KV & 6.6KV Solar.

Lagos, Nigeria

As Scholarship Trainee, I was engaged with a lot of activities around two major sections of the company: The Maintenance Unit (Spreader Yard) and The Power House (SDMO Yard & Substation B Yard).Learned and became familiar with Siemens (SINAMICS) Programmable Logic Controller (PLC), Human Machine Interface (HMI), and Variable Frequency Drives (VFD)… Worked.

Nigeria

• Land Seismic Operation...
• Ensuring availability of seismic line cables, batteries, geophones, and hydrophones at all times
• Troubleshooting and rectification of faulty seismic line cables and geophones
• Charging and maintaining in good condition of cable batteries

Port Harcourt, Rivers, Nigeria

• Under the program, I was posted to one of the company's offshore Production Platform (INDA) and worked under both Operations and Maintenance Dept.
• Taking of 2-hourly oil production readings
• Changing of Recording charts every 24hr for the LACT Unit and departing line
• Opening and shutting-in of wells when necessary
• Testing of BS&W and API gravity of oil well samples and departing oil, Chemical optimization, Biocide injection, Effluent /sea water sample collection
• Ensuring stability in oil production and responding to process alarms

Aba, Abia, Nigeria

• Intern at Tonimas oil lubrication plant under Maintenance for SIWES program
• Became familiar with electric motors and push-button starters
• Worked with team to carry out Preventive and Corrective Maintenance on the electric motors
• Worked with team to carry out troubleshooting and rectification of faulty electrical devices and equipment
• Worked with team to carry out starting and loading of the backup Diesel Engine generators in case of main power failure

Level 4 (Hnc) City & Guilds Of London, Electrical Engineering Technologies/Technicians

Activities and Societies: This was an 18-month vocational Scholarship Training in Electrical Engineering Technology, with sufficient.

Higher National Diploma (Hnd) -In View, Electrical And Electronics Engineering, 3.68/4.0

Ordinary National Diploma (Ond), Electrical And Electronics Engineering, Upper Credit (3.47/4.0)

Activities and Societies: *Member, Nigerian Institute of Electrical and Electronic Engineers (NIEEE), Warri Chapter *Public Relations.

Waec/Neco, Science

Activities and Societies: *Library Prefect *Represented the school in a Cowbell Mathematics National Competition *played Badminton and.