Muhammad Faysal Ali
AeroLeads people directory · profile

Muhammad Faysal Ali Email & Phone Number

Experienced Mechanical Engineer || Sr. MEP Professional || Design & Engineering || Site Supervision || QA/QC and T&C Inspections at TRACTEBEL
Location: Riyadh, Saudi Arabia, Saudi Arabia 8 work roles 3 schools
1 work email found @alumcogroup.com LinkedIn matched
✓ Verified Jun 2026 4 data sources Profile completeness 100%

Contact Signals · 1 work email

Work email m****@alumcogroup.com
LinkedIn Profile matched
3 free lookups remaining · No credit card
Current company
TRACTEBEL
Role
Experienced Mechanical Engineer || Sr. MEP Professional || Design & Engineering || Site Supervision || QA/QC and T&C Inspections
Location
Riyadh, Saudi Arabia, Saudi Arabia
Company size
4428 employees

Who is Muhammad Faysal Ali? Overview

A concise factual answer block for searchers comparing this professional profile.

Quick answer

Muhammad Faysal Ali is listed as Experienced Mechanical Engineer || Sr. MEP Professional || Design & Engineering || Site Supervision || QA/QC and T&C Inspections at TRACTEBEL, a company with 4428 employees, based in Riyadh, Saudi Arabia, Saudi Arabia. AeroLeads shows a work email signal at alumcogroup.com and a matched LinkedIn profile for Muhammad Faysal Ali.

Muhammad Faysal Ali previously worked as Mechanical Consultant at Tractebel and Mechanical Engineer at Keo International Consultants. Muhammad Faysal Ali holds Master’S Degree, Engineering Management(Specialization In Project Management), 3.56/A from Centre For Advanced Studies In Engineering (Case) Islamabad,Pakistan.

Company email context

Email format at TRACTEBEL

This section adds company-level context without repeating Muhammad Faysal Ali's masked contact details.

*@alumcogroup.com
68% confidence

AeroLeads found 1 current-domain work email signal for Muhammad Faysal Ali. Compare company email patterns before reaching out.

View email format View company profile Management contacts
Profile bio

About Muhammad Faysal Ali

A dynamic solutions-oriented Engineering professional with 16 years of professional work experience for various MEP systems in high rise Fit-out, Infrastructure and mix development projects of Qatar. Brings excellent interpersonal and communication skills to work effectively with colleagues, management, and vendors. Proactive in identifying areas of improvement and taking steps to drive successful completion of projects.Most recently, I worked for KEO International Consultants as a Mechanical Engineer for Al Wakrah Administration building project. Before that, I was engaged with Arab Engineering Bureau as a Mechanical Engineer for Qatar Energy District project, besides few other projects. Prior to that, I was engaged with ECG consultants as a Mechanical Site Engineer for Public Works Authority (Ashghal) building, drainage and Infrastructure projects in Qatar. Earlier, I was part of the joint venture namely ALYSJ-JV as a Sr. MEP Engineer for Qatar Metro Rail project, where I successfully managed three metro stations for MEP scope of work.My Career objective is to become part of renowned firms for professional growth and do value addition in the field of Mechanical Engineering and Engineering management. Below is the summary of my core competencies and key responsibilities (both as a Contractor and Supervision Consultant) which are not limited to:•HVAC/ACMV systems, Fire-Fighting systems, Fire Suppression systems, Drainage networks, Potable water networks, TSE, Water features, Dry and Wet Utilities, Water supply and distribution networks, Pumping station, Fuel oil systems, Sewerage lifting station, Ductile Iron and HDPE pipes with fittings, Flow meter chamber, Irrigation networks and various Plumbing systems.•To review various Engineering documents such as Design drawings, Shop drawings, Coordination drawings As-built drawings, Material Submittals, Method Statements and Pre-Qualifications with reference to globally recognized standards and local guidelines.•MEP Site Engineering in coordination with contractors, clients and third parties besides site Interfacing for various MEP systems.•To organize/witness Material and Installation quality inspections and Testing/ Commissioning for various MEP systems followed by documentation.•To issue and record Site Observation reports (SOR) and Non-Conformance reports (NCR).•To inspect and record Site Snags and follow-up for de-snagging prior to project handing-over to the client.•Proficient in MS office, AUTOCAD and Project management tools.

Listed skills include Aluminum, Specialist In Aluminum Facade Technology, Glass, Materials, and 23 others.

Current workplace

Muhammad Faysal Ali's current company

Company context helps verify the profile and gives searchers a useful next step.

TRACTEBEL
Tractebel
Experienced Mechanical Engineer || Sr. MEP Professional || Design & Engineering || Site Supervision || QA/QC and T&C Inspections
brussels, brussels hoofdstedelijk gewest, belgium
Website
tractebel-engie.com
Employees
4428
AeroLeads page
Company profile
View company profile Email format
8 roles

Muhammad Faysal Ali work experience

A career timeline built from the work history available for this profile.

Mechanical Consultant

Current
Tractebel

Riyadh, Saudi Arabia

May 2024 - Present

Mechanical Engineer

Keo International Consultants

Qatar

Responsible to review Engineering documents such as Design drawings, Requests for Information, Prequalification documents etc with reference to globally recognized standards and QCS local guidelines.Attending progress meetings with client and contractor to discuss the overall status of project in detail.

Feb 2023 - Dec 2023

Mechanical Engineer

Arab Engineering Bureau - Qatar

Doha, Qatar

  • Supervising site installation activities and attending site inspections including Testing and Commissioning activities (with reference to local and globally recognized codes and standard guidelines) in liaison with all.
  • Supervising site installation activities and attending site inspections including Testing and Commissioning activities (with reference to local and globally recognized codes and standard guidelines) in liaison with all.
  • Reviewing drawings, Prequalification documents, Method statement, Testing/commissioning reports, Material submittals, Site Snagging and documenting Installation and Material Inspection requests. Show less
Dec 2021 - Jan 2023

Mechanical Site Engineer

Engineering Consultants Group S.A.

Qatar

  • Attending MEP site inspections including T&C activities (with reference to NFPA, QCDD guidelines, QCS-2014 and PWA standards) in liaison with all the relevant stakeholders for the below systems: 1) Internal and.
  • Attending MEP site inspections including T&C activities (with reference to NFPA, QCDD guidelines, QCS-2014 and PWA standards) in liaison with all the relevant stakeholders for the below systems: 1) Internal and.
  • Developing installation and testing plans, reports, pre-functional and functional test procedures. Reviewing T&C test reports and determining the acceptable criteria based on project’s specifications and applicable.
  • Attending weekly progress meetings with project stakeholders.
  • Reporting on daily, weekly and monthly basis to the client and higher management. Show less
Nov 2019 - Nov 2021

Senior Mep Engineer

Alysj Jv

Qatar

My main responsibilities were inclusive but not limited to below:- Managing a team of 10 Engineers for the installation of MEP (HVAC,FF,DR,PL) systems followed by T&C activities. -Developing commissioning plans, reports, pre-functional and functional test procedures. -Coordination with various vendors, PMC, QDC (AHJ) and JV site teams for QC installation.

May 2017 - Aug 2019

Mechanical Project Engineer

Redco Construction Al Mana

Qatar

Overall responsibility for MEP (HVAC,FF, DR, PL) Installation and testing & commissioning activities for below Projects:1) Doha Oasis2) Mall of Qatar

Aug 2015 - Apr 2017

Mechanical Project Engineer

Bouygues Batimant International

Doha-Qatar

Site incharge for three high rise buildings in QP District project, responsible to supervise the MEP contractor for monitoring and controlling MEP installation and T&C activities.

Jan 2012 - Jun 2015

Mechanical Site Engineer

Hochtief

Doha Qatar

Site incharge for building Type-3 & 4 in Barwa Commercial Avenue project, responsible to supervise the MEP contractor for monitoring and controlling MEP installation and T&C activities.

May 2008 - Oct 2011
Team & coworkers

Colleagues at TRACTEBEL

Other employees you can reach at tractebel-engie.com. View company contacts for 4428 employees →

DL Dieter Lefebvre Dieter Lefebvre Colleague at TractebelGhent Metropolitan Area, Belgium View → FS Frédéric Somville Frédéric Somville Colleague at TractebelBrussels Metropolitan Area, Belgium View → TT Thiago Tito Thiago Tito Colleague at TractebelBelo Horizonte, Minas Gerais, Brazil, Brazil View → MM Miguel Messias Miguel Messias Colleague at TractebelCatas Altas, Minas Gerais, Brazil, Brazil View → AF Ali Falah Al Hamad Ali Falah Al Hamad Colleague at TractebelRiyadh, Saudi Arabia, Saudi Arabia View → JP Jos Proost Jos Proost Colleague at TractebelLimburg, Flemish Region, Belgium, Belgium View → AK Amrendra Kumar Singh Amrendra Kumar Singh Colleague at TractebelSri Ganganagar, Rajasthan, India, India View → AA Ahmed Aziz Ahmed Aziz Colleague at TractebelJiddah, Makkah, Saudi Arabia, Saudi Arabia View → LF Luciano Ferraz Andrade Luciano Ferraz Andrade Colleague at TractebelBelo Horizonte, Minas Gerais, Brazil, Brazil View → YM Yves Meyssen Yves Meyssen Colleague at TractebelAntwerp, Flemish Region, Belgium, Belgium View →
3 education records

Muhammad Faysal Ali education

Master’S Degree, Engineering Management(Specialization In Project Management), 3.56/A

Centre For Advanced Studies In Engineering (Case) Islamabad,Pakistan

Bachelor’S Degree, Mechanical Engineering, A

N.W.F.P University Of Engineering & Technology, Pakistan

Activities and Societies: I was an active member of ASME

Matric/Secondary School, F.Sc/Higher Secondary School, A

Pec Doha Qatar
FAQ

Frequently asked questions about Muhammad Faysal Ali

Quick answers generated from the profile data available on this page.

What company does Muhammad Faysal Ali work for?

Muhammad Faysal Ali works for TRACTEBEL.

What is Muhammad Faysal Ali's role at TRACTEBEL?

Muhammad Faysal Ali is listed as Experienced Mechanical Engineer || Sr. MEP Professional || Design & Engineering || Site Supervision || QA/QC and T&C Inspections at TRACTEBEL.

What is Muhammad Faysal Ali's email address?

AeroLeads has found 1 work email signal at @alumcogroup.com for Muhammad Faysal Ali at TRACTEBEL.

Where is Muhammad Faysal Ali based?

Muhammad Faysal Ali is based in Riyadh, Saudi Arabia, Saudi Arabia while working with TRACTEBEL.

What companies has Muhammad Faysal Ali worked for?

Muhammad Faysal Ali has worked for Tractebel, Keo International Consultants, Arab Engineering Bureau - Qatar, Engineering Consultants Group S.A., and Alysj Jv.

Who are Muhammad Faysal Ali's colleagues at TRACTEBEL?

Muhammad Faysal Ali's colleagues at TRACTEBEL include Dieter Lefebvre, Frédéric Somville, Thiago Tito, Miguel Messias, and Ali Falah Al Hamad.

How can I contact Muhammad Faysal Ali?

You can use AeroLeads to view verified contact signals for Muhammad Faysal Ali at TRACTEBEL, including work email, phone, and LinkedIn data when available.

What schools did Muhammad Faysal Ali attend?

Muhammad Faysal Ali holds Master’S Degree, Engineering Management(Specialization In Project Management), 3.56/A from Centre For Advanced Studies In Engineering (Case) Islamabad,Pakistan.

What skills is Muhammad Faysal Ali known for?

Muhammad Faysal Ali is listed with skills including Aluminum, Specialist In Aluminum Facade Technology, Glass, Materials, Construction, Doors, Curtain Wall, and High Rise.

Find 750M verified contacts

Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.