Mohammad Anwar Manjanoor
AeroLeads people directory · profile

Mohammad Anwar Manjanoor Email & Phone Number

Electrical Engineer | Embedded Systems | Hardware Design | UAV at Partix
Location: Pittsburgh, Pennsylvania, United States 8 work roles 2 schools
1 work email found @iastate.edu LinkedIn matched
✓ Verified Jun 2026 4 data sources Profile completeness 100%

Contact Signals · 1 work email

Work email m****@iastate.edu
LinkedIn Profile matched
3 free lookups remaining · No credit card
Current company
Role
Electrical Engineer | Embedded Systems | Hardware Design | UAV
Location
Pittsburgh, Pennsylvania, United States

Who is Mohammad Anwar Manjanoor? Overview

A concise factual answer block for searchers comparing this professional profile.

Quick answer

Mohammad Anwar Manjanoor is listed as Electrical Engineer | Embedded Systems | Hardware Design | UAV at Partix, based in Pittsburgh, Pennsylvania, United States. AeroLeads shows a work email signal at iastate.edu and a matched LinkedIn profile for Mohammad Anwar Manjanoor.

Mohammad Anwar Manjanoor previously worked as Co-Founder at Partix and Embedded Electronics Engineer at Hummingbird Systems, Llc. Mohammad Anwar Manjanoor holds Master'S Degree, Electrical Engineering from Iowa State University.

Company email context

Email format at Partix

This section adds company-level context without repeating Mohammad Anwar Manjanoor's masked contact details.

{first_initial}{last}@iastate.edu
86% confidence

AeroLeads found 1 current-domain work email signal for Mohammad Anwar Manjanoor. Compare company email patterns before reaching out.

Profile bio

About Mohammad Anwar Manjanoor

Mohammad Anwar Manjanoor is a Electrical Engineer | Embedded Systems | Hardware Design | UAV at Partix. He possess expertise in leadership, robot operating system, rotorcraft, team work, technical presentations and 30 more skills. Colleagues describe him as "Anwar is a capable and proficient intermediate engineer. He's passionate about electrical and embedded systems, especially in the context of UAV and autonomous aviation applications. Upon joining, Anwar committed to learning systems and tools necessary to design electromechanical products. Specifically, he dug into our ECAD and MCAD tools with tenacity. He became proficient rapidly and continues to effectively utilize these tools to deliver hardware and embedded solutions. Anwar successfully delivered a number of quality custom electrical designs during our time working together, in spite of that time being shorter than I would have liked (I departed). Anwar was resolute in his desire to join the team. He demonstrated persistence and fastidiousness when joining the company which made the decision to hire him an easy one. He's also a great addition to company culture as he has an excellent personality. He is friendly, engaging, inquisitive, kind, and empathetic. He works well cross departmentally and manages multiple stakeholders exceedingly well for his experience level. I would recommend him highly for an intermediate technical role. I'm sure he will grow well beyond that recommendation, too.", "I have known Mohammad Anwar as a graduate student in electrical engineering during my Ph.D. study at Intelligent Aerospace laboratory, Iowa State University, under Dr. Peng Wei. He has excellent knowledge of hardware integration and inter-operability, and I have seen him work on various embedded platforms and developing and testing quadrotor and fixed-wing unmanned aerial vehicles (UAV). He has a positive attitude and a desire to produce a quality product.", and "Anwar has been working on building an autonomous racing quadrotor and testing embedded processors as a companion computer with the Pixhawk flight controller. He has worked on modifying the PX4 flight stack to incorporate the PX4flow sensor helping in maintaining the altitude and the direction in a GPS denied environment. He has also worked on integrating the RP Lidar A3 onboard and generating point cloud of the environment and commanding the flight controller for navigating in a GPS denied environment. Anwar has strong understanding of hardware interoperability, sensor fusion, embedded processors and embedded programming. Anwar is a hardworking researcher and a great team leader."

Listed skills include Leadership, Robot Operating System, Rotorcraft, Team Work, and 31 others.

Current workplace

Mohammad Anwar Manjanoor's current company

Company context helps verify the profile and gives searchers a useful next step.

Partix
Partix
Electrical Engineer | Embedded Systems | Hardware Design | UAV
AeroLeads page
8 roles

Mohammad Anwar Manjanoor work experience

A career timeline built from the work history available for this profile.

Co-Founder

Current
Jan 2024 - Present

System Integration And Test Engineer

Ann Arbor, Michigan, US

  • System integration and flight tested a hybrid power gas/electric vertical takeoff and lading aircraft.
  • Supported embedded and software engineers test firmware, debug interface with sensors using standard protocol (I2C, SPI, UART, CAN) between peripherals and hosts.
  • Generated hardware configuration and wire harness documentation for various sensors interface to the aircraft
  • Assisted with PCB design review and component selection for a flight controller carrier board
May 2021 - Aug 2021

System Integration Engineer

Ann Arbor, Michigan, US

  • Build wire harness, assisted with electrical design, integrated avionics, ground and flight tested Vertical takeoff and landing (VTOL) aircraft
  • Documented the wire harness design and testing procedure for various subsystems
Oct 2020 - Apr 2021

Embedded System And Sensor Fusion Laboratory Research Assistant

Ames, Iowa, US

  • Developing a sensor fusion data recording system for residential and commercial buildings funded by Advanced Research Projects Agency–Energy (ARPA-E)
  • Designed and tested printed circuit board for housing sensor and interfacing with raspberry pi microprocessor
Nov 2018 - Oct 2020

Aerial Robotics Research Assistant

Ames, Iowa, US

  • Developing a completely autonomous indoor racing quad rotor capable of fully on-board computation and high speed in a dynamic environment.
  • Performing research on implementing deep learning based computer vision to autonomous aerial vehicles and perception using LIDAR.
  • Assisted students with an aircraft design course sponsored and supported by Boeing
Jan 2018 - Oct 2020

Uas Avionic System Research Assistant

Ames, Iowa, US

  • Assisted in setting up motor thrust testing and moment of inertia testing for fixed wing unmanned aircraft systems (UAS)
  • Assembled UAS frame, avionics and configured sensors for autonomous waypoint navigation
May 2019 - Aug 2019
2 education records

Mohammad Anwar Manjanoor education

Master'S Degree, Electrical Engineering

Iowa State University

Bachelor Of Engineering - Be, Electronics And Communication Engineering

Visvesvaraya Technological University
FAQ

Frequently asked questions about Mohammad Anwar Manjanoor

Quick answers generated from the profile data available on this page.

What company does Mohammad Anwar Manjanoor work for?

Mohammad Anwar Manjanoor works for Partix.

What is Mohammad Anwar Manjanoor's role at Partix?

Mohammad Anwar Manjanoor is listed as Electrical Engineer | Embedded Systems | Hardware Design | UAV at Partix.

What is Mohammad Anwar Manjanoor's email address?

AeroLeads has found 1 work email signal at @iastate.edu for Mohammad Anwar Manjanoor at Partix.

Where is Mohammad Anwar Manjanoor based?

Mohammad Anwar Manjanoor is based in Pittsburgh, Pennsylvania, United States while working with Partix.

What companies has Mohammad Anwar Manjanoor worked for?

Mohammad Anwar Manjanoor has worked for Partix, Hummingbird Systems, Llc, Near Earth Autonomy, Vayu Aerospace Corporation, and Iowa State University.

How can I contact Mohammad Anwar Manjanoor?

You can use AeroLeads to view verified contact signals for Mohammad Anwar Manjanoor at Partix, including work email, phone, and LinkedIn data when available.

What schools did Mohammad Anwar Manjanoor attend?

Mohammad Anwar Manjanoor holds Master'S Degree, Electrical Engineering from Iowa State University.

What skills is Mohammad Anwar Manjanoor known for?

Mohammad Anwar Manjanoor is listed with skills including Leadership, Robot Operating System, Rotorcraft, Team Work, Technical Presentations, Ardupilot/Px4, Digital Electronics, and Sensor Fusion.

Find 750M verified contacts

Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.