Mark Hood
AeroLeads people directory · profile

Mark Hood Email & Phone Number

Group Product Manager - Enterprise Reliability Engineering at John Deere
Location: Des Moines Metropolitan Area, United States 12 work roles 3 schools
2 work emails found @johndeere.com LinkedIn matched
✓ Verified July 2026 4 data sources Profile completeness 100%

Contact Signals · 2 work emails

Work email h****@johndeere.com
LinkedIn Profile matched
3 free lookups remaining · No credit card
Current company
Role
Group Product Manager - Enterprise Reliability Engineering
Location
Des Moines Metropolitan Area, United States
Company size

Who is Mark Hood? Overview

A concise factual answer block for searchers comparing this professional profile.

Quick answer

Mark Hood is listed as Group Product Manager - Enterprise Reliability Engineering at John Deere, a with 50659 employees, based in Des Moines Metropolitan Area, United States. AeroLeads shows a work email signal at johndeere.com and a matched LinkedIn profile for Mark Hood.

Mark Hood previously worked as Staff Reliability Engineer at John Deere and Senior Reliability Engineer at John Deere. Mark Hood holds Ms, Electrical Engineering from University At Buffalo.

Company email context

Email format at John Deere

This section adds company-level context without repeating Mark Hood's masked contact details.

*@johndeere.com
74% confidence

AeroLeads found 2 current-domain work email signals for Mark Hood. Compare company email patterns before reaching out.

Profile bio

About Mark Hood

I am currently a Sr Staff Reliability Engineer at John Deere Intelligent Solutions Group. I joined John Deere in 2011 as a Senior Reliability Engineer at John Deere Power Systems. Prior to working at John Deere, I worked at Lockheed Martin in Grand Prairie, Texas, and Owego, New York as an Electrical Engineer, and Reliability Engineer, respectively. I graduated from the University at Buffalo with a Master of Science in Electrical Engineering. Prior to attending college I was enlisted in the U.S. Army as a Cannon Crewmember, Field Artillery. I primarily fired the M119 105 mm howitzer. Additionally, I had the opportunity to serve in Iraq for 11 months in 2004. Prior to my military service, I lived in Germany for 20 years.

Listed skills include Leadership, Six Sigma, Supplier Negotiation, Engineering Management, and 36 others.

Current workplace

Mark Hood's current company

Company context helps verify the profile and gives searchers a useful next step.

John Deere
John Deere
Group Product Manager - Enterprise Reliability Engineering
Des Moines, IA, US
Website
Employees
50659
AeroLeads page
12 roles

Mark Hood work experience

A career timeline built from the work history available for this profile.

Group Product Manager - Enterprise Reliability Engineering

Des Moines, Ia, Us

Group Product Manager - Enterprise Reliability Engineering

Current

Moline, Il, Us

Developing next generation reliability analytics, process and tools- Group Product Manager: Reliability Engineering Digital Products- Global Reliability Analytics Tools and Process Owner- Training and Development Manager for Reliability Engineering

Jun 2021 - Present

Staff Reliability Engineer

Moline, Il, Us

Reliability Engineering Process & Strategy OwnerPrimary Responsibilities:• Reliability Engineering Supervisor - Product Development Programs• Reliability Engineering Process Development - Life Data Analysis Automation - FMEA-based Reliability Analysis - Big Data Reliability Analytics (Telematics)

Feb 2015 - Jun 2021

Senior Reliability Engineer

Moline, Il, Us

Lead Reliability Engineer for New Technology and Critical Component Development Primary Responsibilities:• Supervisor for Component Reliability Engineering team• Developing analysis solutions for repairable systems (ReliaSoft Synthesis)• Defining processes for assessing suppliers' reliability engineering capabilities• Developing the Reliability Program Plans for new engine programs• Developing and documenting reliability processes that are aligned with industry best practices• System reliability and availability requirements development

Jun 2011 - Jan 2015

Electrical Engineer

Bethesda, Md, Us

As the Integrated Product Team (IPT) Lead, managed technical requirements/performance of fuze subcontractor on the Guided MLRS Program. • Active participant in the Material Review Board (MRB).• Provided engineering production support, determined root cause and implemented corrective action plans for production failures. • Regularly participated in Production Line Validations (PLV)• Review and approval authority on subcontractor technical documentation, CAD drawings and subcontractor specification documentation.• Developed subcontractor qualification plans. • Conducted subcontractor failure investigations and generated corrective action plans. • Participated in contract negotiations.As the Risk Manager, managed program risk identification, assessment, and mitigation process. • Proactively participated in component obsolescence planning and led mitigation activity via government/industry risk management process.

Sep 2009 - May 2011

Reliability Engineer

Bethesda, Md, Us

As Lead Reliability Engineer on the VH-71A Presidential Helicopter Replacement Program:• Managed Reliability and Maintainability Key Performance Parameters (KPP) and Technical Performance Measurements (TPM).• Provided monthly status of program performance to technical leadership and government customer.• Developed and maintained predictive system-level reliability models to meet customer requirements.• Developed Crow-AMSAA models and managed the Reliability Growth Program.• Led weekly teleconferences with the customer to further growth of Reliability, Maintainability, and Availability objectives.• Identified and successfully socialized program risks to the Risk Management Board.• Coordinated status from team members to elevate cost, schedule, and performance impacts to technical and program leadership.

Aug 2007 - Sep 2009

Research Assistant

Energy Systems Institute

• Managed the schedules and payroll of research aides while leading a team of engineers, which planned, executed and analyzed research in support of energy systems area.• Coauthored the following conference papers;“Threshold Arcing Characteristics for Pulsed Exploding Films” ”, Pulsed Power Conference, 2007“Inductance, Capacitance, and Resistance of a Surrogate Exploding Wire” Power Modulator Symposium, 2006“Determination of Electromagnetic Wave Propagation from an Electrically Pulsed Thin Film” Power Modulator Symposium, 2006

Jan 2006 - Jun 2007

Cannon Crewmember

Arlington, Virginia, Us

• Honorable Discharge• Ordered to active duty in support of Operation Iraqi Freedom• Performed drills in support of Cannon Crewmember requirements to sustain National Defense Initiatives one weekend a month and two weeks each year while attending college full time.

Feb 1999 - Jul 2005

Military Police

Arlington, Virginia, Us

• Honorable Discharge• Served in a designated imminent danger pay area• Led a three-man military police team in a combat environment. • Provided security for transportation units. • Acquired the ability to make decisions and bear ultimate moral responsibility for those decisions.

Apr 2004 - Mar 2005

Cannon Crewmember

Arlington, Virginia, Us

• Honorable Discharge• Air Assault School

Sep 1996 - Feb 1999
Team & coworkers

Colleagues at John Deere

Other employees you can reach at johndeere.com. View company contacts for 50659 employees →

3 education records

Mark Hood education

Ms, Electrical Engineering

University At Buffalo

Bs, Electrical Engineering

University At Buffalo

Aas, Electrical Engineering Technology

Queensborough Community College Of The City University Of New York (Cuny)
FAQ

Frequently asked questions about Mark Hood

Quick answers generated from the profile data available on this page.

What company does Mark Hood work for?

Mark Hood works for John Deere.

What is Mark Hood's role at John Deere?

Mark Hood is listed as Group Product Manager - Enterprise Reliability Engineering at John Deere.

What is Mark Hood's email address?

AeroLeads has found 2 work email signals at @johndeere.com for Mark Hood at John Deere.

Where is Mark Hood based?

Mark Hood is based in Des Moines Metropolitan Area, United States while working with John Deere.

What companies has Mark Hood worked for?

Mark Hood has worked for John Deere, Urbandale Food Pantry, Lockheed Martin, Energy Systems Institute, and Army National Guard.

Who are Mark Hood's colleagues at John Deere?

Mark Hood's colleagues at John Deere include Abhilasha Pandey, Diego Ferreira Martins, Ty Meyer, Fernando Henrique, and John Baptis.

How can I contact Mark Hood?

You can use AeroLeads to view verified contact signals for Mark Hood at John Deere, including work email, phone, and LinkedIn data when available.

What schools did Mark Hood attend?

Mark Hood holds Ms, Electrical Engineering from University At Buffalo.

What skills is Mark Hood known for?

Mark Hood is listed with skills including Leadership, Six Sigma, Supplier Negotiation, Engineering Management, Corrective Actions, Presenter, Systems Engineering, and Supplier Evaluation.

Find 750M verified contacts

Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.