Michael Varney work email
- Valid
- Valid
- Valid
Michael Varney personal email
Michael Varney phone numbers
I have completed my Robotics, Automation, and Plc Technician 2 Certification through George Brown College in 2016. I followed this up with Information Technology through Harris College before they closed. I have recently returned to Ivy Tech Community College to further update my skills with RS Logix 5000. I have passed PAC 2 with an A this spring and currently enrolled in PAC 1. I have regretted for Industrial Robotics 1 and Industrial Electrical 2 this fall. I am also skilled at uploading, downloading, and editing Siemens Step 7 and TIA Portal programming. I have additional experience with Kuka, Fanuc, and ABB Robotics.
-
Automation EngineerTheoris Oct 2023 - PresentIndianapolis, In, Us -
Maintenance/Controls TechnicianElringklinger Feb 2021 - Oct 2023Dettingen/Erms, Baden-Württemberg, DeTroubleshoot and repair of Schuler Presses, Dreyer Parts Transport, and Automatic Robotic Cells. To perform these tasks I am skilled in Siemens Programming, Kuka Robots Teach Point Adjustments, Electrical, Mechanical, and Fluid Power print reading. I am proficient with 480VAC, 120VAC, and 24VDC. -
Maintenance TechnicianAvancez Llc Nov 2019 - Feb 2021Clarkston, Mi, Us -
Field Service TechnicianHydromat, Inc. Mar 2019 - May 2019Maryland Heights, Missouri, Us -
Field Service EngineerEasi Sep 2018 - Feb 2019Hanover, Md, UsField Service Engineering. Contract position for Amazon commissioning new start up plants. -
Traveling Maintenance TechnicianJci Aug 2018 - Sep 2018
-
Traveling Maintenance TechnicianPmg Inc. Apr 2018 - May 2018Bloomington, Mn, Us2 Month Contract position. I was able work independently after 2 days of saftey training. I troubleshot and repaired various VMC and HMC such as Brothers Drill, Kingston and Johnsford. On the Brothers Drill, I was able to get a chip conyeyor to work in automatic that had not worked since they put the machine in. I was able to do this by determining that the contactor for the motor was controlled by external output 105. I assigned an automatic signal to this output, which resulted in automatic operation. Previously, someone had to manually push the contactor in with a screwdriver. -
Electrical/Electronics Technician 4Lsc Communications Mar 2017 - Feb 2018Chicago, Il, UsTroubleshoot and repair Albert and Ceruti printing presses, Kodak printers, and Gatherer lines. Went online and troubleshoot Allen Bradley RS Logix 5000 and 500 PLCs with a laptop or remotely via desktop. Also worked with Modicon and Seimans PLCs. -
Maintenance TechnicianFcc Adams Jun 2016 - Mar 2017Fanuc Robots, Various VMC and HMC, Modern Furnace Troubleshooting and Repair. Steel Stamping Press Troubleshooting and Repair.My coworker Matthew Koenemann and I had a Fanuc Robot that was malfunctioning. We worked the weekend night shift, so we had to work with no support on the weekends. The robot was faulting out when it would place a part on the exit conveyor. We was able to determine that the robot was not pausing prior to releasing the part. Due to the the training that I obtained while pursuing my Robotics Certification at George Brown College, I was able to determine what program was malfunctioning. I proceeded to add a .25 second delay prior to the Call Gripper Open Command. This resulted in the robot functioning properly.Another issue that we had shortly after I started was a Stamping Machine faulting out. This was the result of a hydraulic overpressure fault. This was a turnover from the prior shift. I was not familiar with this machine so I found the manuals and prints to troubleshoot the problem. I was able to determine that the only way to clear the fault was to relief the excess pressure. I located the pressure relief valve on the hydraulic schematic. This is a very large machine, going from the basement to the second floor level. After an intensive search, I located the valve on the side of the inside of the machine. It was a globe valve that I was able to turn to relieve the pressure. This resulted in the signal being removed from the input, allowing the machine to operate.
-
Maintenance Tech 2Advanced Technology Service Dec 2015 - May 2016Repair and Preventative Maintenance of food packaging machines, cookers, ovens, fast backs, conveyor systems, mixers, and food processing machines.A machine that I worked on here was a dough shuttle. The machine had been down for a few days prior to it being turned over to me. The machine would run to one side and continue running until the motor faulted out. I was able to determine that the encoder was malfunctioning. The encoder had an A channel, B channel, and a Z homing pulse. When channel A is the leading edge, the shuttle will travel one direction. When Channel B is the leading edge, the shuttle will travel in the other direction. I was able to determine through voltage checks that Channel A signal was not being sent to the PLC. I traced the cable back until I found a broken wire inside of a cannon plug. I resoldered the wire to get the shuttle working properly.
-
Maintecnance Technician Level 3D And W Fine Pack Jul 2013 - Dec 2015Troubleshoot and repair extruders, thermoforming machines, hoists, and air compressors.
-
Maintenance TechnicianHuhtamaki Sep 2012 - Jul 2013Espoo, FiTroubleshoot and repair paper plate machines. -
Maintenance EngineerNestle Usa Nov 2011 - May 2012Vevey, Ch
Michael Varney Skills
Michael Varney Education Details
-
Itt Technical Institute-Fort WayneAnd Automation Engineering -
Harrison CollegeInformation Technology
-
George Brown College Continuing EducationAnd Automation Engineering
-
George Brown College Continuing EducationProgrammable Logic Controllers
-
George Brown College Continuing EducationRobotics Technology/Technician
-
Ivy Tech Community CollegeAnd Automation Engineering
Frequently Asked Questions about Michael Varney
What company does Michael Varney work for?
Michael Varney works for Theoris
What is Michael Varney's role at the current company?
Michael Varney's current role is Automation Engineer.
What is Michael Varney's email address?
Michael Varney's email address is mv****@****ech.com
What is Michael Varney's direct phone number?
Michael Varney's direct phone number is +130969*****
What schools did Michael Varney attend?
Michael Varney attended Itt Technical Institute-Fort Wayne, Harrison College, George Brown College Continuing Education, George Brown College Continuing Education, George Brown College Continuing Education, Ivy Tech Community College.
What skills is Michael Varney known for?
Michael Varney has skills like Tpm, Plant Maintenance, Preventive Maintenance, Continuous Improvement, Root Cause Analysis, 5s, Haccp, Lean Manufacturing, Capital Projects, Manufacturing, Robotics Programming, Rs Logix 5000 Programming.
Free Chrome Extension
Find emails, phones & company data instantly
Aero Online
Your AI prospecting assistant
Select data to include:
0 records × $0.02 per record
Download 750 million emails and 100 million phone numbers
Access emails and phone numbers of over 750 million business users. Instantly download verified profiles using 20+ filters, including location, job title, company, function, and industry.
Start your free trial