Mohamed Ali Grati Email & Phone Number
@usa.com
LinkedIn matched
Who is Mohamed Ali Grati? Overview
A concise factual answer block for searchers comparing this professional profile.
Mohamed Ali Grati is listed as QC Inspector Looking for new opportunities at SOCOMMI, a with 2 employees, based in Délégation Sfax Ville, Sfax, Tunisia. AeroLeads shows a work email signal at usa.com and a matched LinkedIn profile for Mohamed Ali Grati.
Mohamed Ali Grati previously worked as QC Inspector at Socommi and Test Pack & Hydrostatic Coordinator at Socomenin. Mohamed Ali Grati holds Mechanical Engineering Technician; Major In Power Engineering, Genie Mecanique from Higher Institute Of Technological Studies (Iset).
Email format at SOCOMMI
This section adds company-level context without repeating Mohamed Ali Grati's masked contact details.
AeroLeads found 1 current-domain work email signal for Mohamed Ali Grati. Compare company email patterns before reaching out.
About Mohamed Ali Grati
Mohamed Ali Grati is a QC Inspector Looking for new opportunities at SOCOMMI. He possess expertise in gaz, inspection, tuyauterie, welding, gas and 26 more skills. He is proficient in Italien, Anglais and Français.
Listed skills include Gaz, Inspection, Tuyauterie, Welding, and 27 others.
Mohamed Ali Grati's current company
Company context helps verify the profile and gives searchers a useful next step.
Mohamed Ali Grati work experience
A career timeline built from the work history available for this profile.
Test Pack & Hydrostatic Coordinator
Project: Nawara CPFOwner: OMV Position: Test Pack CoordinatorProject detailsNature of work and Responsibilities- Entry data clerck- Piping prefabrication and installation inspection- Monitoring of Test Pack and Hydrotest activities- Monitoring of NDT activities
Qc Inspector
Project: Nawara PipelineOwner: OMV Position: Piping InspectorProject detailsNature of work and Responsibilities- Entry data clerck- Welding Inspection- Preparation of Isometric drawings with welds and spools identification.- Piping prefabrication and installation inspection- Monitoring of Test Pack and Hydrotest activities- Monitoring of NDT activities
Welding Inspector
- Project: Algérien Qatari SteelOwner: Danielli / ChaudraPosition: QA/QC SupervisorProject detailsNature of work and Responsibilities:- Entry data clerck- Welding Inspection- Preparation of Isometric drawings with welds and spools identification.- Piping prefabrication and installation inspection- Monitoring of Test Pack and Hydrotest activities- Monitoring of NDT activities
Qa/Qc Inspector
Project: Trunkline and Waha Reception FacilitiesOwner: OMV / ECMPlusPosition: QA/QC SupervisorProject detailsNature of work and Responsibilities- Preparation of Isometric drawings with welds and spools identification- Welding Inspection- Piping prefabrication and installation inspection- Monitoring of Test Pack and Hydrotest activities- Monitoring of NDT activities
Qa/Qc Inspector
Project Ashtart Revamping ProjectOwner Global Industrial Services/ SEREPT (Tunisia)Position QA/QC InspectorNature of work and Responsibilities - Compilation of Quality Data Book for certification with Bureau Veritas. - Monitoring of Hydrotest files for piping and pressure vessels - Monitoring of NDT filing
Qc Welding Inspector
- Hydro test Test pack walk down inspection and review of Test Pack documents.
Qc Welding Inspector
Project: Sulfuric Acid Unit Owner: M/s.TIFERT (Tunisian Indian Fertilizers) Position: QC Welding Supervisor Project details, Nature of work and Responsibilities: - Piping prefabrication and installation inspection - Welding Inspector - Good involvement in NDT inspection of VT & FT.
Qc Welding Inspector
Project: AGI (Above Ground Installation) ProjectOwner: M/s.British Gas TunisiaPosition: QC Welding SupervisorProject details, Nature of work and Responsibilities: - Certified with performing authority (PTW) by BG Tunisia. - Hydro test Test pack walk down inspection and review of Test Pack documents. - Piping Test pack coordination with main contractor and client. - Piping prefabrication and installation inspection - Good involvement… Show more Project: AGI (Above Ground Installation) ProjectOwner: M/s.British Gas TunisiaPosition: QC Welding SupervisorProject details, Nature of work and Responsibilities: - Certified with performing authority (PTW) by BG Tunisia. - Hydro test Test pack walk down inspection and review of Test Pack documents. - Piping Test pack coordination with main contractor and client. - Piping prefabrication and installation inspection - Good involvement in NDT inspection of VT & FT. - Preparation release for painting. Show less
Qc Welding Inspector
Project: Hasdrubal Terminal ProjectOwner: M/s.British Gas TunisiaClient: M/s. Petrofac International LtdPosition: QC Welding SupervisorProject details, Nature of work and Responsibilities: - Familiar with Welder qualification testing and ID card verification. - Surveillance inspection of Welding, Visual Inspection on finished Welds and Dimensional Accuracy. - Inspection of welding parameters for duplex stainless steel. - “Ferrite Test… Show more Project: Hasdrubal Terminal ProjectOwner: M/s.British Gas TunisiaClient: M/s. Petrofac International LtdPosition: QC Welding SupervisorProject details, Nature of work and Responsibilities: - Familiar with Welder qualification testing and ID card verification. - Surveillance inspection of Welding, Visual Inspection on finished Welds and Dimensional Accuracy. - Inspection of welding parameters for duplex stainless steel. - “Ferrite Test Inspection for duplex stainless steel using ferritescope “FISCHER” model MP-30E. - Preparation release for painting. Show less
Edging Technician
- Technician in optical edging machines.- Installation, maintenance and reparation of optical edging machines of the Spanish company “INDO”
Mohamed Ali Grati education
Mechanical Engineering Technician; Major In Power Engineering, Genie Mecanique
Technical Baccalauréat, Energitique
Frequently asked questions about Mohamed Ali Grati
Quick answers generated from the profile data available on this page.
What company does Mohamed Ali Grati work for?
Mohamed Ali Grati works for SOCOMMI.
What is Mohamed Ali Grati's role at SOCOMMI?
Mohamed Ali Grati is listed as QC Inspector Looking for new opportunities at SOCOMMI.
What is Mohamed Ali Grati's email address?
AeroLeads has found 1 work email signal at @usa.com for Mohamed Ali Grati at SOCOMMI.
Where is Mohamed Ali Grati based?
Mohamed Ali Grati is based in Délégation Sfax Ville, Sfax, Tunisia while working with SOCOMMI.
What companies has Mohamed Ali Grati worked for?
Mohamed Ali Grati has worked for Socommi, Socomenin, Bouchamaoui Industries, Danielli / Chaudra, and Omv.
How can I contact Mohamed Ali Grati?
You can use AeroLeads to view verified contact signals for Mohamed Ali Grati at SOCOMMI, including work email, phone, and LinkedIn data when available.
What schools did Mohamed Ali Grati attend?
Mohamed Ali Grati holds Mechanical Engineering Technician; Major In Power Engineering, Genie Mecanique from Higher Institute Of Technological Studies (Iset).
What skills is Mohamed Ali Grati known for?
Mohamed Ali Grati is listed with skills including Gaz, Inspection, Tuyauterie, Welding, Gas, Piping, Petroleum, and Ndt.
Search by job title, company, industry, location, and seniority. Export verified B2B contact data when you need it.
Start free trialCheck these profiles if this is not the Mohamed Ali Grati you were looking for.
View similar profiles