Mohammad Al-Amin, Phd

Mohammad Al-Amin, Phd Email and Phone Number

Director of Studies, CEng, MIMechE, SFHEA @ School of Engineering, University of Warwick
sandwell, sandwell, united kingdom
Mohammad Al-Amin, Phd's Location
Coventry, England, United Kingdom, United Kingdom
Mohammad Al-Amin, Phd's Contact Details

Mohammad Al-Amin, Phd work email

Mohammad Al-Amin, Phd personal email

About Mohammad Al-Amin, Phd

An experienced lecturer in Mechanical Engineering with a research interest in high-efficiency photovoltaics and energy storage. I am an Associate Professor in the School of Engineering at the University of Warwick. I have finished my PhD in engineering at the University of Warwick and won the Faculty of Science Thesis Prize 2018. I hold a First Class undergraduate degree in Mechanical Engineering (2006). I completed an MSc course in Sustainable Energy Technologies at the University of Southampton (2009) for which I received a Distinction. I worked four years as a Senior Teaching Fellow in WMG, the University of Warwick in the field of Mechanical Engineering and lead the discipline group. I have three and half years outstanding research experience in solar cell and module process engineering at the Microsol International, United Arab Emirates. I was responsible for commissioning and maintaining process technologies in a photovoltaic module facility of 150 MW/yr production capacities in the Solon International LL FZE, United Arab Emirates. I am author/co-author of several publications including journal articles, book chapter, conference papers, and research articles in international magazine archive.Specialties:● R&D in silicon photovoltaic( materials, cells processes and module processes)● Research project leadership● Process development in crystalline silicon solar cells and modules.

Mohammad Al-Amin, Phd's Current Company Details
School of Engineering, University of Warwick

School Of Engineering, University Of Warwick

View
Director of Studies, CEng, MIMechE, SFHEA
sandwell, sandwell, united kingdom
Employees:
9
Mohammad Al-Amin, Phd Work Experience Details
  • School Of Engineering, University Of Warwick
    Director Of Studies (Mechanical, Materials And Process Engineering)
    School Of Engineering, University Of Warwick Aug 2022 - Present
    Coventry, England, United Kingdom
    - Leading teaching and learning of the Mechanical Engineering courses.
  • School Of Engineering, University Of Warwick
    Associate Professor (Mechanical, Materials And Process Engineering)
    School Of Engineering, University Of Warwick Oct 2021 - Present
    Coventry, England, United Kingdom
    - Led Electromechanical Engineering Degree Apprenticeship (EMDA) programme- Was responsible for the design and delivery of modules in Mechanical Engineering
  • University Of Warwick - Wmg
    Assistant Professor, Me Discipline Group Leader
    University Of Warwick - Wmg Aug 2017 - Sep 2021
    Covenry, United Kingdom
    - Was responsible for teaching a range of modules in Mechanical Engineering. - Research in sustainable energy technologies and supervise student (final year BSc. and MSc.) projects.
  • School Of Engineering, University Of Warwick
    Research Assistant
    School Of Engineering, University Of Warwick Jul 2016 - Mar 2020
    Coventry, United Kingdom
    ● Perform technical assessment of the deployment, operation and grid connection issuesassociated with PV deployment in Bangladesh.● Give lectures to educate people in Bangladesh about the field of photovoltaic energy.● Perform experimental work to assess the feasibility of using internal gettering in commercial PV cell production.
  • School Of Engineering, University Of Warwick
    Lab Demonstrator
    School Of Engineering, University Of Warwick Sep 2013 - Jul 2016
    United Kingdom
    Key responsibilities:● Demonstrate use of practical equipment, conduct experiments, exercises, workshops and/or processes and to answer questions related to those demonstrations to undergrad students● Responsible for the day-to-day operation of the laboratory.● Provide feedback on student performance and any issues arising in the course of the demonstration, to the course organiser/work supervisor.● Ensure that equipment is functional and/or material for demonstrations, exercises etc is prepared before the start of the session.● Maintain student attendance records.Major lab experiments:● Wind tunnel: Pressure and velocity distribution across a circular cylinder. ● Engine and heat pump: Thermodynamics in the refrigeration cycle.● Inertia lab: Determine inertia in a range of circular disk.● Engineering materials lab: Determine material properties in engineering. ● Hall effect in silicon material: Determine Hall effect in 'p and n'-type silicon materials.
  • Cu Coventry
    Lecturer (Mechanical Engineering)
    Cu Coventry Jan 2015 - Jul 2017
    Coventry, United Kingdom
    Key responsibilities:● Prepare the materials for teaching, moderate lecture content for the undergraduate students and the students at the Foundation level.● Conduct teaching in a wide range of subject areas including Mechanical engineering, Engineering sciences, Academic skills, Renewable Energy. ● Provide individual and/or group assistance to students in assigned subject areas.● Create supplemental study materials and practice exams as needed ● Communicate regularly with the programme leader to make further improvement in teaching.● Assist the students in completing their project works and technical report writing.● Provide guidance to the students at the Foundation level to proceed for further academic studies. ● Support students at the Foundation level in preparing UCAS application for further academic study.
  • Solon International Ll Fze
    Assistant Process Manager (Pv Module Division)
    Solon International Ll Fze Jul 2012 - Aug 2013
    United Arab Emirates
    Key responsibilities:● Commissioned the overall process of crystalline silicon photovoltaic module (60 cells and 72 cells) in a 150 MW/yr production facility. ● Led a group of ~100 members to run and maintained process technologies for wide a range of industrial PV module products.● Collaborated with the research and development team in the Berlin, Germany to optimize the standard process and developing new processes. ● Performed investigations on the processes to improve yield efficiency in daily production. ● Was responsible for cost optimization through material consumption and minimize power loss from solar cell to PV modules. Specialties in process equipment:● SOMONT RAPID four stringer. ● 3S laminator● EL imaging tool for PV module● Peeling tester(to examine soldering quality between ribbon and solar cells)
  • Microsol International Ll Fze
    Process In-Charge (Pv Cell Division)
    Microsol International Ll Fze Nov 2011 - Jun 2012
    United Arab Emirates
    Key responsibilities:● Commissioned and maintained the cell processing of multicrystalline silicon materials in a 200MW/yr production facilities. ● Responsible for process optimization in online acid texturing tool, phosphorus diffusion process, silicon nitride anti-reflection deposition, screen printing metallization and sintering process. ● Led R&D project to develop a new process with higher cell efficiency. ● Performed a daily investigation in cell processing to endeavor a root cause for low-efficiency cells. ● Performed a daily statistical analysis of cell processing parameters to improve yield efficiency in daily production. Specialities in process equipment:● SCHMID automated acid texturing tool. ● Centrotherm four stack diffusion furnace● Roth and Rau PECVD (silicon nitride coating)● OTB Solar silicon nitride passivation tool● Screen printing metallization process● Centrotherm firing furnace for sintering. ● Cell characterization tool
  • Microsol International Ll Fze
    Leader Of R&D Department
    Microsol International Ll Fze May 2010 - Jun 2012
    United Arab Emirates
    Key responsibilities:● Led a group of engineer and technician to increase cell efficiency. ● Was responsible for implementation of research findings at industrial production scale. ● Performed a series of experiment to investigate the limitations of the existing process and to make further improvement. ● Worked with the production and process department to investigate the root cause of cells with comparatively lower efficiency. ● Led research and development project for high-efficiency cell processing such as back contact solar cells. ● Used several computer modelling software including one-dimensional computer modelling of solar cell, PC1D for process optimization.● Responsible for writing and publishing paper in conference, journal and international PV magazine.Key achievements:● Introduce a new additive in texturization process. ● Optimize phosphorus diffusion process. ● Optimize the metallization and sintering process. ● Overall improvement in average cell efficiency ~0.5% in daily cell production level.

Mohammad Al-Amin, Phd Skills

Semiconductors Scanning Electron Microscopy Photovoltaics Product Development Solar Cells Research Process Engineering Solar Energy Engineering R&d Silicon Sustainable Energy Materials Science Renewable Energy

Mohammad Al-Amin, Phd Education Details

Frequently Asked Questions about Mohammad Al-Amin, Phd

What company does Mohammad Al-Amin, Phd work for?

Mohammad Al-Amin, Phd works for School Of Engineering, University Of Warwick

What is Mohammad Al-Amin, Phd's role at the current company?

Mohammad Al-Amin, Phd's current role is Director of Studies, CEng, MIMechE, SFHEA.

What is Mohammad Al-Amin, Phd's email address?

Mohammad Al-Amin, Phd's email address is am****@****hoo.com

What schools did Mohammad Al-Amin, Phd attend?

Mohammad Al-Amin, Phd attended University Of Warwick, University Of Southampton, Bangladesh University Of Engineering And Technology.

What are some of Mohammad Al-Amin, Phd's interests?

Mohammad Al-Amin, Phd has interest in Pv Module Technologies, R&d In Solar Cell.

What skills is Mohammad Al-Amin, Phd known for?

Mohammad Al-Amin, Phd has skills like Semiconductors, Scanning Electron Microscopy, Photovoltaics, Product Development, Solar Cells, Research, Process Engineering, Solar Energy, Engineering, R&d, Silicon, Sustainable Energy.

Free Chrome Extension

Find emails, phones & company data instantly

Find verified emails from LinkedIn profiles
Get direct phone numbers & mobile contacts
Access company data & employee information
Works directly on LinkedIn - no copy/paste needed
Get Chrome Extension - Free

Aero Online

Your AI prospecting assistant

Download 750 million emails and 100 million phone numbers

Access emails and phone numbers of over 750 million business users. Instantly download verified profiles using 20+ filters, including location, job title, company, function, and industry.